Carbon-based materials have been widely explored as electromagnetic (EM) wave absorbing materials with specific surface areas and low density. Herein, novel porous carbon/SiOC ceramic composites materials (porous C/sp-SiOC) were prepared from the binary mixture, which used the low cost pitch as carbon resource and the polysilylacetylene (PSA) as SiOC ceramic precursor. With the melt-blending-phase separation route, the PSA resin formed micro-spheres in the pitch. Then, numerous SiOC ceramic micro-spheres were generated in porous carbon matrices during the pyrolysis process. By changing the percent of SiOC, the microstructure and wave absorption of porous C/sp-SiOC composites could be adjusted. The synergistic effect of the unique structure, the strong interfacial polarization, and the optimized impedance matching properties contributed to the excellent absorption performance of porous C/sp-SiOC composites. The minimum reflection loss for porous C/sp-SiOC absorber reached −56.85 dB, and the widest effective bandwidth was more than 4 GHz with a thickness of only 1.39 mm. This presented research provides an innovative and practical approach to developing high-performance porous carbon-based microwave absorption materials from green chemistry.
24 April 2025 in Journal of Materials Research and Technology
Cf/C-SiC composites have become the preferred material for high-temperature load-bearing applications because of their low density, high strength, and excellent thermal-physical properties. Due to the composite’s poor sintering performance, the sintering temperature and pressure required for the preparation of Cf/C-SiC by traditional methods are also relatively high, which limits its engineering application. Herein, based on the precursor-derived ceramic route and C/C composites material preparation process, a binary binder (coal pitch and polysilylacetylene) is developed, which combines a carbon source, SiC precursor, and semi-ceramic SiC filler organically. Then, the SiC phase was successfully introduced into C/C composites by the slurry impregnation-hot pressing sintering method. The prepared Cf/C-SiC composites showed good mechanical properties, with a density of 1.53 g/cm3 and a bending strength of 339 ± 21 MPa. Moreover, the effects of the binary binder on the microstructure, density, and mechanical properties of Cf/C-SiC composites were investigated. This work provides a novel and effective approach to fabricating Cf/C-SiC composites with low density and high strength.
In this paper, polymethylhydrosiloxane (PMHS) and ethanol were used as raw materials to synthesize the ceramic precursor of side ethoxy polysiloxane (PESO) using dehydration and a dealcoholization reaction, which had a ceramic yield of 87.15% and a very low residual carbon content. With the quartz fiber as a reinforcer, the silica matrix composites (SiO2f/SiO2) with a double-layer interface (PyC-SiO2/BNNSs) coating were manufactured using precursor impregnation pyrolysis (PIP). The as-prepared SiO2f/SiO2 possessed an excellent mechanical property, which exhibited obvious fiber pull-out and debonding phenomena from a fracture morphology. The flexural strength and fracture toughness of SiO2f/SiO2 reached 63.3 MPa and 2.52 MPa·m1/2, respectively. Moreover, the SiO2f/SiO2 had suitable dielectric properties, with a dielectric constant of about 2.5 and a dielectric loss of less than 0.01. This work provides an important concept for the enhancement of the dielectric properties and mechanical properties of quartz fiber-reinforced ceramic matrix composites, as well as in the preparation of wave-transmissivity composites.