Nanostructured silicon anodes have shown extraordinary lithium storage properties for lithium-ion batteries (LIBs) but are usually achieved at low areal loadings (< 1.5 mg·cm⁻²) with low areal capacity. Sustaining sound electrochemical performance at high loading requires proportionally higher ion/electron currents and robust structural stability in the thicker electrode. Herein, we report a three-dimensional (3D) printed silicon-graphene-carbon nanotube (3D-Si/G/C) electrode for simultaneously achieving ultrahigh areal/gravimetric capacities at high mass loading. The periodically arranged vertical channels and hierarchically porous filaments facilitate sufficient electrolyte infiltration and rapid ion diffusion, and the carbonaceous network provides excellent electron transport properties and mechanical integrity, thus endowing the printed 3D-Si/G/C electrode with fast electrochemical reaction kinetics and reversibility at high mass loading. Consequently, the 3D-Si/G/C with high areal mass loading of 12.9 mg·cm⁻² exhibits excellent areal capacity of 12.8 mAh·cm⁻² and specific capacity of 1007 mAh·g⁻¹, respectively. In-situ optical microscope and ex-situ scanning electron microscope (SEM) confirm that the hierarchically porous filaments with interconnected carbon skeletons effectively suppress the volume change of silicon and maintain stable micro-lattice architecture. A 3D printed 3D-Si/G/C-1∥3D-LiFePO₄/G full cell holds excellent cyclic stability (capacity retention rate of 78% after 50 cycles) with an initial Coulombic efficiency (ICE) of 96%. This work validates the feasibility of 3D printing on constructing high mass loading silicon anode for practical high energy-density LIBs.

Monolithic carbon electrodes with robust mechanical integrity and porous architecture are highly desired for capacitive deionization but remain challenging. Owing to the excellent mechanical strength and electroconductivity, commercial carbon fibers cloth demonstrates great potential as high‐performance electrodes for ions storage. Despite this, its direct application on capacitive deionization is rarely reported in terms of limited pore structure and natural hydrophobicity. Herein, a powerful metal‐organic framework‐engaged structural regulation strategy is developed to boost the desalination properties of carbon fibers. The obtained porous carbon fibers features hierarchical porous structure and hydrophilic surface providing abundant ions‐accessible sites, and continuous graphitized carbon core ensuring rapid electrons transport. The catalytic‐etching mechanism involving oxidation of Co and subsequent carbonthermal reduction is proposed and highly relies on annealing temperature and holding time. When directly evaluated as a current collector‐free capacitive deionization electrode, the porous carbon fibers demonstrates much superior desalination capability than pristine carbon fibers, and remarkable cyclic stability up to 20 h with negligible degeneration. Particularly, the PCF‐1000 showcases the highest areal salt adsorption capacity of 0.037 mg cm⁻² among carbon microfibers. Moreover, monolithic porous carbon fibers‐carbon nanotubes with increased active sites and good structural integrity by in‐situ growth of carbon nanotubes are further fabricated to enhance the desalination performance (0.051 mg cm⁻²). This work demonstrates the great potential of carbon fibers in constructing high‐efficient and robust monolithic electrode for capacitive deionization.

Cf/C-SiC composites have become the preferred material for high-temperature load-bearing applications because of their low density, high strength, and excellent thermal-physical properties. Due to the composite’s poor sintering performance, the sintering temperature and pressure required for the preparation of Cf/C-SiC by traditional methods are also relatively high, which limits its engineering application. Herein, based on the precursor-derived ceramic route and C/C composites material preparation process, a binary binder (coal pitch and polysilylacetylene) is developed, which combines a carbon source, SiC precursor, and semi-ceramic SiC filler organically. Then, the SiC phase was successfully introduced into C/C composites by the slurry impregnation-hot pressing sintering method. The prepared Cf/C-SiC composites showed good mechanical properties, with a density of 1.53 g/cm³ and a bending strength of 339 ± 21 MPa. Moreover, the effects of the binary binder on the microstructure, density, and mechanical properties of Cf/C-SiC composites were investigated. This work provides a novel and effective approach to fabricating Cf/C-SiC composites with low density and high strength.