In the field of sustainable construction materials, the production of eco-friendly concretes, obtained by the addition of waste products such as biochar and recycled polymer particles, offers interesting alternatives to traditional materials. Biochar is a carbonaceous solid by-product obtained from the thermo-chemical conversion of biomass and its addition into concrete admixtures can offer an eco-friendly carbon sequestration solution, capable to slightly improve concrete properties. Recycled polymer materials can be used to partially replace conventional aggregates with the aim of obtaining lighter concretes that help to face the disposal challenge presented by this non-degradable plastic waste. However, the influence of these waste additions on the corrosion behavior of steel rebars embedded in these “eco-concretes” is still unexplored. Within this context, this work presents some results of an extensive study dealing with the concrete mechanical and physical properties and the rebar corrosion resistance during cyclic exposures to chloride-containing solutions.
Only in Europe, every year around 29 million tons of plastic waste are generated and only about 35% of such waste is collected for recycling. This results in huge amounts of plastic waste threatening the environment. One of the possible solutions for disposal can be represented by the concrete industry. Several research works have already studied the use of plastic waste in concrete mix as partial replacement for aggregates, showing that this use of plastics can contribute to reducing the environmental impact of concrete production by saving non‐renewable resources. At the same time, lightweight concrete can be produced but at a non‐negligible cost of a mechanical strength reduction. This work aims at investigating the effects on concrete physical and mechanical performances resulting from the introduction of recycled plastic aggregates in combination with another kind of waste used as filler, namely biochar. Biochar, which is the solid carbonaceous by‐product resulting from wood‐waste pyro‐gasification, can have the role of carbon sequestrating additive in concrete, being able to fix carbon in a stable form in buildings for decades. The experimental findings obtained in this work show that the combination of biochar and recycled plastic waste, which was never investigated before, can help to obtain concretes with satisfactory mechanical performance, which promote circular economy principles. Thanks to biochar addition, the reduction in mechanical properties due to the presence of plastics is extremely limited with respect to control; moreover, these concretes demonstrate better behavior in terms of fracture energy and ductility.
The building sector is responsible for about 37% of the global carbon dioxide emissions, 6% of which result from concrete (and particularly cement) production. Using recycled and supplementary cementitious materials and adopting a whole building life cycle approach can be seen as multi‐beneficial strategies for materials' design. In this framework, this study aims to formulate a green concrete, by replacing 10, 15 and 20% of cement with a secondary raw material constituted of vitrified bottom ash derived from municipal solid waste incineration. The basic physical and mechanical properties were measured up to 365 days, so to evaluate the effects of the cement replacement both on short and long‐term behavior. Life Cycle Assessment was used as a tool to evaluate the environmental performance of the developed green concrete. An Eco‐Mechanical Analysis was also performed to match the environmental impacts with the mechanical behavior, allowing to assess that the concrete produced by replacing 20% of cement with vitrified municipal solid waste incineration bottom ash (if classified as hazardous waste) is the one that leads to optimize the overall sustainability. The approach proposed in this work, which can be easily generalized, contributes to the definition of a route for the implementation of innovative green construction building materials by using waste.