In this paper, we propose a facile approach to the management of graphene oxide (GO) chemistry via its synthesis using KMnO4/K2Cr2O7 oxidizing agents at different ratios. Using Fourier Transformed Infrared Spectroscopy, X-ray Photoelectron Spectroscopy, and X-ray Absorption Spectroscopy, we show that the number of basal-plane and edge-located oxygenic groups can be controllably tuned by altering the KMnO4/K2Cr2O7 ratio. The linear two-fold reduction in the number of the hydroxyls and epoxides with the simultaneous three-fold rise in the content of carbonyls and carboxyls is indicated upon the transition from KMnO4 to K2Cr2O7 as a predominant oxidizing agent. The effect of the oxidation mixture’s composition on the structure of the synthesized GOs is also comprehensively studied by means of X-ray diffraction, Raman spectroscopy, transmission electron microscopy, atomic-force microscopy, optical microscopy, and the laser diffraction method. The nanoscale corrugation of the GO platelets with the increase of the K2Cr2O7 content is signified, whereas the 10–100 μm lateral size, lamellar, and defect-free structure is demonstrated for all of the synthesized GOs regardless of the KMnO4/K2Cr2O7 ratio. The proposed method for the synthesis of GO with the desired chemistry opens up new horizons for the development of graphene-based materials with tunable functional properties.
13 September 2016 in Journal of Physics D: Applied Physics
The micro-scale patterns in graphene on Si/SiO 2 substrate were fabricated using ultrashort 515 nm laser pulses. For both picosecond and femtosecond laser pulses two competitive processes, based on photo-thermal (ablation) and photochemical (oxidation/etching) effects, were observed. The laser-induced etching of graphene starts just below the threshold energy of graphene ablation: 1.7 nJ per 280 fs pulse and 2.7 µ J per 30 ps pulse. Whilst etching is not sensitive to thermal properties of graphene and provides uniform patterns, the ablation, in contrast, is highly affected by defects in the graphene structure like wrinkles and bilayer islands. The mechanisms of ultrafast laser interaction with graphene are discussed.
This paper presents the technique of forming flexible liquid sensors for biological applications based on carbon nanotube networks. We bend structures with a radius of curvature of 5 mm and the resistance change is no more than 8–10%, keeping the overall properties of the conductive coatings developed during multiple bends. We demonstrate the possibility of determining thrombin when biosensor structures are immobilized by specific aptamers.
The influence of technologies of preliminary treatment of carbon fibers by various electromagnetic methods, namely, cold plasma and ultraviolet radiation, on their mechanical characteristics is considered. The purpose of this treatment is to increase the adhesive strength of a metal coating with a fiber to produce carbon fiber plastics with a high interlayer shear strength. The use of plasma treatment is experimentally found to be most effective. The interlayer shear strengths are presented for the manufacture of carbon fiber plastics from carbon fabrics and tapes after their preliminary treatment and the subsequent deposition of a copper coating onto their surface.