Ali Toolabi

Dr. Ali Toolabi


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
ATAli Toolabi
Ali Toolabi
MTMahsa Tahergorabi
Mahsa Tahergorabi
JMJamal Mehralipour
Jamal Mehralipour
NSNeda Seyedi
Neda Seyedi
NNNegin Nasseh
Negin Nasseh
Ternary g-C3N4/CQD/Ag photocatalysts were synthesized via deposition of carbon quantum dots (CQDs) and silver nanoparticles (Ag) onto graphitic carbon nitride (g-C3N4) for efficient acetaminophen degradation. The nanocomposites exhibited enhanced photoresponse and broad-spectrum photocatalytic activity under both UV (254 nm, 250 W) and Xenon (>420 nm, 500 W) irradiation. Characterization by XRD, FTIR, SEM, PL, and EDX elucidated the material’s composition, structure, morphology, and optical properties. Optimized photocatalytic degradation of acetaminophen (50 mg/L) was achieved at pH 7 with 0.6 g/L catalyst loading and 60 min irradiation, yielding degradation efficiencies of 87.5% (UV) and 85.3% (Xenon). Radical quenching experiments and GC-MS analysis identified hydroxyl radicals as the primary reactive species and revealed a gradual decrease in intermediate toxicity during mineralization. This study demonstrates the superior photocatalytic performance of the ternary g-C3N4/CQD/Ag nanocomposites compared to binary systems for effective acetaminophen removal.

31 January 2022 in International Transactions on Electrical Energy Systems
Verified
Journal Article
Open access
PDF file
ATAli Toolabi
Ali Toolabi
MAMorteza Aghahadi
Morteza Aghahadi
mahdiyeh Eslamimahdiyeh Eslami
mahdiyeh Eslami
SRShima Rashidi
Shima Rashidi
Behdad ArandianBehdad Arandian
Behdad Arandian
Srete NikolovskiSrete Nikolovski
Srete Nikolovski
This paper presents a new approach for the coordinated design of a power system stabilizer- (PSS-) and static VAR compensator- (SVC-) based stabilizer. For this purpose, the design problem is considered as an optimization problem, while the decision variables are the controllers’ parameters. This paper proposes an effective optimization algorithm based on a rat swarm optimizer, namely, adaptive rat swarm optimization (ARSO), for solving complex optimization problems as well as coordinated design of controllers. In the proposed ARSO, instead of a random initial population, the algorithm starts the search process with fitter solutions using the concept of the opposite number. In addition, in each iteration of the optimization, the new algorithm replaces the worst solution with its opposite or a random part of the best solution to avoid getting trapped in local optima and increase the global search ability of the algorithm. The performance of the new ARSO is investigated using a set of benchmark test functions, and the results are compared with those of the standard RSO and some other methods from the literature. In addition, a case study from the literature is considered to evaluate the efficiency of the proposed ARSO for coordinated design of controllers in a power system. PSSs and additional SVC controllers are being considered to demonstrate the feasibility of the new technique. The numerical investigations show that the new approach may provide better optimal damping and outperform previous methods.

18 April 2018 in AMB Express
Verified
Journal Article
Open access
PDF file
ATAli Toolabi
Ali Toolabi
MMMohammad Malakootian
Mohammad Malakootian
MGMohammad Taghi Ghaneian
Mohammad Taghi Ghaneian
AEAli Esrafili
Ali Esrafili
MEMohammad Hassan Ehrampoush
Mohammad Hassan Ehrampoush
MTMaesome Tabatabaei
Maesome Tabatabaei
In this study, modeling and degradation of diazinon from contaminated water by advanced oxidation process together with a new test for effluent bioassay using E. coli were investigated. The experiments were designed based on response surface methodology. Nanoparticles (NPs) were synthesized using the sol–gel method. The shape characteristics and specifications of elements in the nanoparticles were characterized using scanning electron microscope and energy dispersive X-ray, respectively. Diazinon was measured using high performance liquid chromatography device and by-products due to its decomposition were identified by gas chromatography-mass (GC–MS). In the present study, effluent bioassay tests were conducted by defining the rate of dehydrogenase enzyme reducing alamar blue method. According to statistical analyses (R2 = 0.986), the optimized values for pH, dose of NPs, and contact time were found to be 6.75, 775 mg/L, and 65 min, respectively. At these conditions, 96.06% of the diazinon was removed. Four main by-products, diazoxon, 7-methyl-3-octyne, 2-isopropyl-6-methyl-4pyrimidinol and diethyl phosphonate were detected. According to the alamar blue reducing (ABR) test, 50% effective concentration, no observed effect concentration, and 100% effective concentration (EC100) for the mortality rate of E. coli were obtained as 2.275, 0.839, and 4.430 mg/L, respectively. Based on the results obtained, it was found that mentioned process was high efficiency in removing diazinon, and also a significant relationship between toxicity assessment tests were obtained (P < 0.05).

5 July 2021 in AMB Express
Verified
Journal Article
Open access
PDF file
MMMohammad Malakootian
Mohammad Malakootian
ATAli Toolabi
Ali Toolabi
SHSaeed Hosseini
Saeed Hosseini
Biological aerated filters (BAFs) have high filtration efficiency due to their tolerance of hydraulic and organic shocks are suitable for the treatment of complex and sanitary wastewater. In this study, for the first time, natural media of date kernel from Bam city was used as the BAF reactor media, with a meshing sand filter separated by a standard metal grid from the natural filter section used at the end of the reactor. This can be considered an innovation in the media and filtration. Aeration in the related reactor with 160 cm height was performed bilaterally as up-flow and continuously by nozzles throughout the reactor media. In this work, the actual effluent of the hospital wastewater treatment plant was employed as the inflow wastewater to the reactor, and its organic and inorganic parameters were measured before and after the treatment by the BAF reactor. The backwashing process was also studied in three ways: bottom backwashing (TB), top backwashing (BB), and top and bottom backwashing (TBBS), to determine the amount of water consumed and to achieve the desired result. According to the results obtained in this study, the removal efficiencies of inorganic and microbial contaminants, amoxicillin and azithromycin were obtained as follows: BOD5: 98.48%, COD: 92.42%, $${\text{NO}}_{3}^{ - }$$ NO 3 - : 99.4%, P: 93.3%, Coliforms: 97%, Color: 42.8%, Turbidity: 95%, Sulphate: 30%, TSS: 98.9%, Amoxicillin: 20% and azithromycin: 13%. In the backwashing process, the amount of water consumed in these three TB, BB, and TBBS methods were obtained 300, 164, and 118 L, respectively, So, TBBS method was selected as the optimal method. Based on the results obtained in this study, it is concluded that the BAF process with natural date kernel has a high efficiency in removing organic and inorganic contaminants from hospital wastewater, also the concentration of most of the effluent parameters was less or in accordance with EPA standard.

4 August 2017 in AMB Express
Verified
Journal Article
Open access
PDF file
ATAli Toolabi
Ali Toolabi
MMMohammad Malakootian
Mohammad Malakootian
MGMohammad Taghi Ghaneian
Mohammad Taghi Ghaneian
AEAli Esrafili
Ali Esrafili
MEMohammad Hassan Ehrampoush
Mohammad Hassan Ehrampoush
MAMohsen Askarishahi
Mohsen Askarishahi
Contamination of water resources by acetamiprid pesticide is considered one of the main environmental problems. The aim of this study was the optimization of acetamiprid removal from aqueous solutions by TiO2/Fe3O4/SiO2 nanocomposite using the response surface methodology (RSM) with toxicity assessment by Pseudomonas aeruginosa BCRC. To obtain the optimum condition for acetamiprid degradation using RSM and central composite design (CCD). The magnetic TiO2/Fe3O4/SiO2 nanocomposite was synthesized using co-precipitation and sol–gel methods. The surface morphology of the nanocomposite and magnetic properties of the as-synthesized Fe3O4 nanoparticles were characterised by scanning electron microscope and vibrating sample magnetometer, respectively. In this study, toxicity assessment tests have been carried out by determining the activity of dehydrogenase enzyme reducing Resazurin (RR) and colony forming unit (CFU) methods. According to CCD, quadratic optimal model with R2 = 0.99 was used. By analysis of variance, the most effective values of each factor were determined in each experiment. According to the results, the most optimal conditions for removal efficiency of acetamiprid (pH = 7.5, contact time = 65 min, and dose of nanoparticle 550 mg/L) was obtained at 76.55%. Effect concentration (EC50) for RR and CFU test were 1.950 and 2.050 mg/L, respectively. Based on the results obtained from the model, predicted response values showed high congruence with actual response values. And, the model was suitable for the experiment’s design conditions.

24 November 2023 in International Journal of Environmental Analytical Chemistry
Verified
Journal Article
Closed access
ATAli Toolabi
Ali Toolabi
MTMahsa Tahergorabi
Mahsa Tahergorabi
EMEhsan Movahed
Ehsan Movahed
SDSajad Moghbely Damaneh
Sajad Moghbely Damaneh
FDFatemeh Moghbely Damaneh
Fatemeh Moghbely Damaneh
FFFarzad Fanaei
Farzad Fanaei