Boyi Zhao

Mr. Boyi Zhao


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 October 2025 in Agriculture
Verified
Journal Article
Open access
PDF file
Chaosai LiuChaosai Liu
Chaosai Liu
BZBoyi Zhao
Boyi Zhao
HZHao Zhang
Hao Zhang
TSTong Shen
Tong Shen
JWJun Wang
Jun Wang
The distribution of grain particles within a silo influences heat and moisture transfer during stored grain ventilation, leading to grain quality losses. A study on porosity distribution analysis and ventilation tests was conducted in a pilot silo with a height of 3 m, a diameter of 1.5 m, and a conical dome height of 0.85 m. The E-B constitutive model was incorporated into the secondary development of FLAC3D 5.0 to analyze the vertical pressure distribution in the grain bulk. An anisotropic porosity distribution model for the maize bulk was developed, accounting for both vertical pressure and segregation mechanisms. The differences in airflow and heat transfer during ventilation between isotropic and anisotropic porosity distributions were quantified. A nonlinear model was innovatively proposed to predict the temperature front curve (TFC) during ventilation as affected by porosity variation. The results indicate that friction between the maize kernel and the silo wall led to vertical pressure at the center of the bottom that was 10.7% higher than that near the wall. The average surface porosity of the maize bulk was 2.8% higher than at the bottom. This led to a minimum porosity of 0.409 at the center of the silo bottom, due to the combined effect of impact during the loading process and vertical pressure. The numerical simulation demonstrated excellent consistency with the experimental data. At a supply vent air velocity of 0.126 m/s, an increase in the maize bulk height from 0.725 m to 2.9 m resulted in reductions in airflow rate and average relative humidity of 20.3% and 9.67%. The airflow velocity near the wall was 13.4% higher than that in the center, leading to a faster cooling rate in the peripheral region compared to the center of the maize bulk. The airflow velocity based on the isotropic porosity model was higher at the center than that predicted by the anisotropic model, whereas the opposite trend was observed near the wall. The temperature front during ventilation based on the anisotropic porosity model exhibited a concave curve. A nonlinear model was developed to predict this temperature front, showing strong agreement with computational data.

12 March 2025 in Buildings
Verified
Journal Article
Open access
PDF file
LDLingfeng Du
Lingfeng Du
DWDongchang Wu
Dongchang Wu
JWJun Wang
Jun Wang
SWShaowei Wang
Shaowei Wang
BZBoyi Zhao
Boyi Zhao
XTXiufeng Tang
Xiufeng Tang
Ultra-high performance concrete (UHPC), functioning as a next-generation cementitious engineering material, demonstrates marked superiority over conventional concrete in critical performance metrics, with its groundbreaking characteristics primarily manifested through exceptional strength and enhanced durability parameters. To address structural demands for reduced self-weight, material efficiency, and simplified construction processes in large-span durable structures, this study proposes a retard-bonded prestressed UHPC (RBPU) beam combining UHPC with retard-bonded prestressing tendons (RBPTs). Three RBPU beam specimens, with varying reinforcement ratios, underwent flexural testing to quantitatively assess their bending performance characteristics, providing foundational references for design optimization. The test results show that the failure mode of RBPU beams is typical flexural failure, demonstrating good load-bearing capacity and excellent ductility. As the reinforcement ratio increases, the cracking moment (Mcr) is improved to some extent, while the ultimate moment (Mu) and ductility are significantly enhanced. The plastic influence coefficient of the section modulus (γ) in the calculation of the Mcr was revised, and the ultimate moment Mu was subsequently calculated. The comparison demonstrates good agreement between the experimental values and computational results. This study provides both experimental and theoretical references for further in-depth research and practical applications of RBPU beams.

6 December 2024 in Buildings
Verified
Journal Article
Open access
PDF file
LYLongfei Yue
Longfei Yue
GCGuixiang Chen
Guixiang Chen
LWLei Wu
Lei Wu
Chaosai LiuChaosai Liu
Chaosai Liu
BZBoyi Zhao
Boyi Zhao
Food security is an important guarantee for national security and public health. Underground reinforced concrete (RC) grain silos can provide a quasi-low temperature environment for grain storage, effectively ensuring the quality of the stored grain. The stress status of the underground silo during soil backfilling construction is complex, which puts the structure at risk of failure. The present study developed a numerical simulation method to investigate the mechanical properties of underground silos during backfilling construction processes. A finite element (FE) analysis of the backfilling construction process of an underground RC grain silo was conducted, and the nonlinear contact between the underground silo and the surrounding soil, as well as the material nonlinear behavior of the soil, was considered. The deformation characteristics and stress distribution of the underground silo during the backfilling construction process were revealed. The results indicate that the underground RC grain silo exhibits good mechanical performance. The underground silo underwent overall settlement during the backfilling construction process, with a total settlement of 21 mm. The maximum radial displacement of the silo wall and the maximum deflection of the radial primary beam were 0.84 mm and 5.67 mm, respectively, both of which were smaller than the limit values. After the completion of backfilling construction, there was a high risk of concrete cracking of the silo wall. The maximum radial and circumferential tensile stresses of the concrete at the silo top were both high, which led to cracking in the top of the silo. Our research results provide important support for the design and evaluation of underground RC grain silos.

12 December 2025 in Buildings
Verified
Journal Article
Open access
PDF file
GCGuixiang Chen
Guixiang Chen
HZHao Zhang
Hao Zhang
LWLei Wu
Lei Wu
Chaosai LiuChaosai Liu
Chaosai Liu
BZBoyi Zhao
Boyi Zhao
The RC underground silo, a novel grain storage structure, is a cylindrical shell surrounded by rock, soil, and groundwater. It leverages the low-temperature underground setting to preserve grain quality. However, the complex underground geotechnical environment may negatively affect the silo’s reliability, and limited information is available about the reliability of the reinforced concrete underground silo. The current research developed a structural system reliability analysis method based on LHS, the RSM, and EEVET, namely the LHS-RSM, for structural reliability analysis. Performance functions were established and controlled by concrete strength and component deformation on the components of the RC underground silos. The limit state function of the whole RC underground silo system was developed based on the EEVET. Combined with the PDS method in the FE program ANSYS 15.0, the random FE analysis of the RC underground silo based on the LHS-RSM was achieved, and the failure probabilities and corresponding reliability indices were evaluated for both individual components and the overall structural system. The research results show that when the silo is treated as a series system, its failure probability exceeds the values calculated for any single failure mode. Therefore, if only the component failure modes are considered, the reliability of RC underground silos will be overestimated, which proves the necessity of conducting a system reliability analysis on RC underground silos. Under the action of underground soil and groundwater, the calculated reliability index of the structural system of the RC underground silo is 3.40, indicating that the entire series structural system meets the requirements of current design codes. The reliability of this novel underground grain storage structure is satisfactory. The findings offer valuable insights for designing and constructing RC underground silos.

8 January 2025 in Buildings
Verified
Journal Article
Open access
PDF file
CLChangshui Li
Changshui Li
BZBoyi Zhao
Boyi Zhao
DHDawei Hao
Dawei Hao
XGXiaolong Gao
Xiaolong Gao
HBHao Bian
Hao Bian
XZXuanzheng Zhang
Xuanzheng Zhang
The steel–Ultra-High-Performance concrete (UHPC) composite slab is a new type of structure made of steel and UHPC connected by pegs, and its flexural mechanical properties and related design methods need to be further investigated. Firstly, a detailed numerical model of the steel UHPC composite slab is established and validated based on previous flexural behavior experimental research. Secondly, the flexural failure mechanisms of steel–UHPC composite slabs are clarified through finite element analysis. Under positive bending moments, when the degree of shear connection is lower than 100%, the ultimate load capacity of the composite slabs is determined by the shear capacity of the pegs. On the contrary, there are no significant changes in the load-carrying capacity of all the specimens, but there is a slight increase in stiffness. Under negative bending moments, the load-bearing capacity, stiffness, and crack resistance of the composite slab are improved as the degree of shear connection and reinforcement ratio increase. Finally, the method used to calculate the flexural capacity of steel–UHPC composite plates under positive and negative bending moments with high accuracy is proposed based on the analytical results. This paper provides a theoretical basis for the design of flexural performance of steel–UHPC composite slab.