Solar energy is a renewable energy source that can be utilized for different applications in today’s world. The effective use of solar energy requires a storage medium that can facilitate the storage of excess energy, and then supply this stored energy when it is needed. An effective method of storing thermal energy from solar is through the use of phase change materials (PCMs). PCMs are isothermal in nature, and thus offer higher density energy storage and the ability to operate in a variable range of temperature conditions. This article provides a comprehensive review of the application of PCMs for solar energy use and storage such as for solar power generation, water heating systems, solar cookers, and solar dryers. This paper will benefit the researcher in conducting further research on solar power generation, water heating system, solar cookers, and solar dryers using PCMs for commercial development.

Microencapsulated paraffin wax/polyaniline was prepared using a simple in situ polymerization technique, and its performance characteristics were investigated. Weight losses of samples were determined by Thermal Gravimetry Analysis (TGA). The microencapsulated samples with 23% and 49% paraffin showed less decomposition after 330 °C than with higher percentage of paraffin. These samples were then subjected to a thermal cycling test. Thermal properties of microencapsulated paraffin wax were evaluated by Differential Scanning Calorimeter (DSC). Structure stability and compatibility of core and coating materials were also tested by Fourier transform infrared spectrophotometer (FTIR), and the surface morphology of the samples are shown by Field Emission Scanning Electron Microscopy (FESEM). It has been found that the microencapsulated paraffin waxes show little change in the latent heat of fusion and melting temperature after one thousand thermal recycles. Besides, the chemical characteristics and structural profile remained constant after one thousand thermal cycling tests. Therefore, microencapsulated paraffin wax/polyaniline is a stable material that can be used for thermal energy storage systems.