Christian José Mendoza-Castiblanco

Dr. Christian José Mendoza-Castiblanco

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2021 in Revista Brasileira de Engenharia Agrícola E Ambiental
Verified
Journal Article
Open access
CCChristian J. Mendoza C.
Christian J. Mendoza C.
AQAndres Javier Peña Quiñones
Andres Javier Peña Quiñones
In the Colombian Sugarcane Research Center CENICAÑA, efficient use of water is always performed based on estimating reference evapotranspiration. In this method, class A pans have been used to estimate the reference evapotranspiration, which provides a more precise estimate of this important variable for water resource management. The objective of this study was to evaluate different reference evapotranspiration methods for the region of influence of the climatological station of the CENICAÑA experimental station. The class A pan method traditionally used in CENICAÑA was compared with and the Penman-Monteith FAO 56 standard method. The historical series used was from January 1, 1994, to December 31, 2014. The climatic variables were the maximum, mean, and minimum temperatures, the mean relative air humidity, solar radiation, and wind speed at 10 m. Willmott’s coefficients, the confidence index (c), and the root mean squared error were used in the performance evaluation. In the comparison with the Penman-Monteith FAO 56 method, all methods presented performance below the minimum requirement of (c) = 0.400. When all methods were compared with the method used in CENICAÑA (Class A pan), only the Penman-Monteith FAO 56 method showed performance classified as good (c = 0.689).


13 December 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JCJulián Felipe Rueda Cadavid
Julián Felipe Rueda Cadavid
DCDallan Michell Cañón Castillo
Dallan Michell Cañón Castillo
CCChristian José Mendoza Castiblanco
Christian José Mendoza Castiblanco
AVAndrés Felipe Rodríguez Vásquez
Andrés Felipe Rodríguez Vásquez
CBCésar Andrés Cortés Bello
César Andrés Cortés Bello
Water loss in soil and plants occurs through processes such as evaporation and transpiration, giving rise to evapotranspiration. In water resource management and precision agriculture, it is important to have accurate estimates of water loss in order to optimize agricultural irrigation and improve crop productivity. To estimate evapotranspiration data, this study used different machine learning methods such as multiple linear regression, polynomial regression, and neural networks using libraries such as Scikit-learn, Statsmodels, TensorFlow, and Keras. Climate data gathered by the Cenicaña weather station located in Florida, department of Valle del Cauca, Colombia, were used to train the machine learning models and later compare evapotranspiration estimates based on the FAO 56 Penman–Monteith method. To ensure the best estimate, 13 different data combinations were used, each combination involving three of the six parameters studied. Combinations involving relative humidity and minimum, maximum or mean temperatures showed the lowest precision, presenting values such as R = 0.7, R2 = 0.51 and RMSE = 0.57, as compared with combinations that considered net radiation and wind speed, which presented the most accurate predictions with values of R = 0.99, R2 = 0.98 and RMSE = 0.73. These results highlight the relevance of machine learning models in estimating evapotranspiration, particularly in areas with limited availability of climate data.

30 June 2016 in Revista Brasileira de Agricultura Irrigada
Verified
Journal Article
Open access
PDF file
CMChristian José Mendoza
Christian José Mendoza
RMRonaldo Harold Menezes
Ronaldo Harold Menezes
ADAntonio Solon Dias
Antonio Solon Dias
A Estimativa da evapotranspiração é de grande importância na modelagem hidrológica e no manejo de bacias hidrográficas como gestão dos recursos hídricos de uma região sendo indispensável no manejo hídrico sustentável de cultivos irrigados. Neste sentido, o presente trabalho tem por objetivo avaliar o desempenho dos métodos Blaney-Criddle, Camargo, Hargreaves-Samani e Priestley-Taylor, de estimativa da evapotranspiração de referência em base diária, para a região de São Luis, MA, com base em comparações com o método padrão Penman-Monteith. Foram analisados dados coletados a partir de uma estação automática do INMET localizada em São Luis - MA, sob coordenadas geográficas de 2°31´48” de latitude sul, 44°12’36” de longitude oeste Greenwich e altitude aproximada de 50,86 m. Conforme classificação de Köppen, o clima da região é do tipo “Aw”. Foram quantificados valores diários das temperaturas máxima (Tmáx), média (Tméd) e mínima (Tmín); umidade relativa média do ar (URméd.), insolação (n) e velocidade do vento a 10m (Vv). Os dados foram obtidos de 01 de janeiro de 2012 a 30 de dezembro de 2012. O processamento dos dados foi realizado através do uso do editor de planilhas do software Microsoft® Office Excel®, onde foram calculadas as diárias de evapotranspiração (ETo). Os valores de ETO variam de 1,95 mm a 5,79 mm, no método padrão Penman-Monteith. Com apoio no erro absoluto médio (EAM), verificou-se, dentre outros indicadores, que o melhor desempenho foi obtido com o método de Priestley-Taylor. Em relação aos métodos aplicáveis quando apenas dados de temperatura foram disponíveis, o de Hargreaves-Samani foi o que apresentou melhor desempenho com c = 0,64.

1 September 2013 in Revista Brasileira de Engenharia Agrícola E Ambiental
Verified
Journal Article
Open access
PDF file
RCRubens Duarte Coelho
Rubens Duarte Coelho
JJJorge L. C. dos Santos Júnior
Jorge L. C. dos Santos Júnior
CMChristian J. Mendoza
Christian J. Mendoza
PRPedro H. P. Ribeiro
Pedro H. P. Ribeiro
FCFernando N. Cunha
Fernando N. Cunha
MTMARCONI BATISTA TEIXEIRA
MARCONI BATISTA TEIXEIRA
Na irrigação localizada com gotejadores posicionados de modo subsuperficial há o risco potencial de partículas de solo serem succionadas através do orifício de saída de água, em virtude da ocorrência de vácuo podendo resultar no entupimento dos mesmos. Objetivou-se, com este trabalho, avaliar o efeito da aplicação de vácuo no desempenho de diferentes modelos de gotejadores sob duas condições de textura de solo e posicionados de modo subsuperficial. Os tratamentos consistiram da aplicação dos níveis de sucção de -10, -15, -20 e -40 kPa, em solos de textura arenosa e argilosa, em 23 modelos de gotejadores usados com mais de 1 ano de funcionamento. O desempenho dos emissores no gotejamento subsuperficial foi influenciado pela textura do solo. De modo geral, em 80% dos emissores o vácuo de -40 kPa proporcionou obstrução nos emissores e redução da vazão, em ambas as texturas de solo. A maior redução de uniformidade de aplicação de água ocorreu com o modelo Irrimon Irridrip Plus 2,5 L h-1 na condição de solo arenoso e aplicação de 40 kPa de sucção.

2 June 2020 in Irriga
Verified
Journal Article
Open access
PDF file
CMChristian José Mendoza
Christian José Mendoza
JCJavier Alí Carbonell
Javier Alí Carbonell
JLJohn Jairo Lasso
John Jairo Lasso
TECHNIQUE CHARACTERIZATION AND HYDRAULIC PERFORMANCE OF PERFORATED HOSE SYSTEM FOR SUGARCANE IN COLOMBIA CHRISTIAN JOSÉ MENDOZA1; JAVIER ALÍ CARBONELL2 E JOHN JAIRO LASSO3 1Soil and Water Engineer, Agronomy Program, Colombian Sugarcane Research Center, San Antonio Experimental Station, Road Cali – Florida km 26, Candelaria, Valle del Cauca, Colombia, christianmendozac@gmail.com 2Ex-Director Agronomy Program, Colombian Sugarcane Research Center, San Antonio Experimental Station, Road Cali – Florida km 26, Candelaria, Valle del Cauca, Colombia, jjcarbonell@cenicana.org 3Agricultural Technician, Agronomy Program, Colombian Sugarcane Research Center, San Antonio Experimental Station, Road Cali – Florida km 26, Candelaria, Valle del Cauca, Colombia, jjlasso@cenicana.org 1 ABSTRACT Sugarcane crops in Colombia are traditionally irrigated, and a higher portion of of the area with the irrigation system by furrows, where efficiency does not exceed 50% and present high application volumes per unit area. In pursuit of a more efficient use of water resources and conservation of the environment, a microirrigation system by perforated hose has been introduced recently. The objective of this research was to characterize and evaluate the performance of the perforated hose system. Therefore, to carry out this experiment, pressures 4, 5, 6, 7, and 8 PSI were evaluated, the flow in each orifice, and the water distribution in the system area. The following parameters were determined: (a) average flow rate, (b) coefficient of manufacture variation, (c) characteristic equation of the emitter/orifice, (d) distance between emitters, and (e) Christiansen Uniformity Coefficient-UC. The analyses showed coefficients of manufacture variation superior to 0.29 for all the pressures evaluated, and the UC were also very low for the system installation options in continuous furrow and alternate furrow, being superior to 43% and 52% respectively. The exponents x of the pressure versus flow equation will range from 0.119 to 0.813. Keywords. Christiansen uniformity coefficient, coefficient of variation, characteristic equation. MENDOZA, C.J.; CARBONELL, J.A.; LASSO, J.J. CARACTERIZAÇÃO TÉCNICA E DESEMPENHO HIDRÁULICO DO SISTEMA DE IRRIGAÇÃO POR MANGUEIRA PERFURADA PARA CANA-DE-AÇÚCAR NA COLÔMBIA 2 RESUMO A cultura da cana-de-açúcar na Colômbia é irriga tradicionalmente e em maior porcentagem da área com o sistema de irrigação por sulcos, onde a eficiência não excede 50% e com altos volumes de aplicação por unidade de área. Em busca de um uso mais eficiente dos recursos hídricos e da conservação do meio ambiente, um sistema de microirrigação por mangueira perfurada foi introduzido recentemente. O objetivo desta pesquisa foi caracterizar e avaliar o desempenho do sistema por mangueira perfurada. Portanto, para realizar este experimento, se avaliaram as pressões de 4, 5, 6, 7 e 8 PSI, a vazão em cada orifício e a distribuição de água na área do sistema. Os seguintes parâmetros foram determinados: (a) vazão média, (b) coeficiente de variação de fabricação, (c) equação característica do emissor / orifício, (d) distância entre emissores e (e) Coeficiente de Uniformidade de Christiansen - CUC. As análises mostraram coeficientes de variação de fabricação superiores a 0,29 para todas as pressões avaliadas, também os CUC foram muito baixos para as opções de instalação do sistema em sulco contínuo e sulco alternado superiores a 43% e 52%, respectivamente. Os expoentes x da equação pressão versus fluxo variam de 0,119 a 0,813. Palavras-chave: coeficiente de uniformidade de Christiansen, coeficiente de variação, equação característica.