Poor air quality inside museums is one of the main causes influencing the state of conservation of exhibits. Even if they are mostly placed in a controlled environment because of their construction materials, the exhibits can be very vulnerable to the influence of the internal microclimate. As a consequence, museum exhibits must be protected from potential negative effects. In order to prevent and stop the process of damage of the exhibits, monitoring the main parameters of the microclimate (especially temperature, humidity, and brightness) and keeping them in strict values is extremely important. The present study refers to the investigations and analysis of air quality inside a museum, located in a heritage building, from Romania. The paper focuses on monitoring and analysing temperature of air and walls, relative humidity (RH), CO2, brightness and particulate matters (PM), formaldehyde (HCHO), and total volatile organic compounds (TVOC). The monitoring was carried out in the Summer–Autumn 2020 Campaign, in two different exhibition areas (first floor and basement) and the main warehouse where the exhibits are kept and restored. The analyses aimed both at highlighting the hazard induced by the poor air quality inside the museum that the exhibits face. The results show that this environment is potentially harmful to both exposed items and people. Therefore, the number of days in which the ideal conditions in terms of temperature and RH are met are quite few, the concentration of suspended particles, formaldehyde, and total volatile organic compounds often exceed the limit allowed by the international standards in force. The results represent the basis for the development and implementation of strategies for long-term conservation of exhibits and to ensure a clean environment for employees, restorers, and visitors.
Monitoring the indoor microclimate in old buildings of cultural heritage and significance is a practice of great importance because of the importance of their identity for local communities and national consciousness. Most aged heritage buildings, especially those made of wood, develop an indoor microclimate conducive to the development of microorganisms. This study aims to analyze one wooden church dating back to the 1710s in Romania from the microclimatic perspective, i.e., temperature and relative humidity and the fungal load of the air and surfaces. One further aim was to determine if the internal microclimate of the monument is favorable for the health of parishioners and visitors, as well as for the integrity of the church itself. The research methodology involved monitoring of the microclimate for a period of nine weeks (November 2020–January 2021) and evaluating the fungal load in indoor air as well as on the surfaces. The results show a very high contamination of air and surfaces (>2000 CFU/m3). In terms of fungal contamination, Aspergillus spp. (two different species), Alternaria spp., Cladosporium spp., Mucor spp., Penicillium spp. (two different species) and Trichopyton spp. were the genera of fungi identified in the indoor wooden church air and Aspergillus spp., Cladosporium spp., Penicillium spp. (two different species) and Botrytis spp. on the surfaces (church walls and iconostasis). The results obtained reveal that the internal microclimate not only imposes a potential risk factor for the parishioners and visitors, but also for the preservation of the wooden church as a historical monument, which is facing a crisis of biodeterioration of its artwork.
Old textiles are important elements of thecultural heritage. As a result of their composition mostly of natural elements old textiles are extremely prone to physical and chemical degradation due to fungal action. The treatments usually applied for the cleaning of heritage textiles target the use of synthetic fungicides, which are potentially harmful to both human health and the environment. Numerous studies highlight as an alternative to the use of conventional antifungals, the employment of essential oils and plant extracts, which are environmentally friendly and which have no adverse effects on human health. Against this background the present study aims to test six essential oils (Lavandula angustifolia, Citrus limon, Mentha piperita, Marjoram, Melaleuca alternifolia, Origanum vulgare) to establish their inhibitory effects against fungi identified on an old piece of traditional Romanian clothing from Maramureş. For the study, the types of fungi present on the objects was determined primarily through the open plates technique and microscopic identification. After identification, the essential oils were applied to the delimited surfaces, and their effects observed up to 32 days after application. The results show that these essential oils have a strong inhibitory effect on such fungal genera as Penicillinum sp., Cladosporium sp., Aspergillus spp., Candida guillermondii, Botrys sp., Mucor sp., having no observable side-effects on the physical properties of the materials concerned. The antimicrobial effects that essential oils and plant extracts have in the short term must be tested in future to ensure the enhanced preservation of heritage textiles and the health integrity of the restorers and visitors who view them in museums, collections or exhibitions.
The old fibers that make up heritage textiles displayed in museums are degraded by the aging process, environmental conditions (microclimates, particulate matter, pollutants, sunlight) and the action of microorganisms. In order to counteract these processes and keep the textile exhibits in good condition for as long as possible, both reactive and preventive interventions on them are necessary. Based on these ideas, the present study aims to test a natural and non-invasive method of cleaning historic textiles, which includes the use of a natural substance with a known antifungal effect (being traditionally used in various rural communities)—lye. The design of the study was aimed at examining a traditional women’s shirt that is aged between 80–100 years, using artificial intelligence techniques for Scanning Electron Microscopy (SEM) imagery analysis and X-ray powder diffraction technique in order to achieve a complex and accurate investigation and monitoring of the object’s realities. The determinations were performed both before and after washing the material with lye. SEM microscopy investigations of the ecologically washed textile specimens showed that the number of microorganism colonies, as well as the amount of dust, decreased. It was also observed that the surface cellulose fibers lost their integrity, eventually being loosened on cellulose fibers of cotton threads. This could better visualize the presence of microfibrils that connect the cellulose fibers in cotton textiles. The results obtained could be of real value both for the restorers, the textile collections of the different museums, and for the researchers in the field of cultural heritage. By applying such a methodology, cotton tests can be effectively cleaned without compromising the integrity of the material.
An improper indoor microclimate has adverse effects on the state of preservation of historical textiles arranged in them, favoring the development of bacteriological microflora. The current study aims to combine traditional and innovative methods for cleaning and preserving a 100-year-old traditional blouse from Bihor, Romania. The material of the blouse was impregnated with 30 and 70 ppm silver nanosuspensions and washed with a substance obtained from boiling natural wood ash (lye). The research goals were to determine the antimicrobial action of lye washing and silver nanoparticles applied to the analyzed textile material and identify the way in which the environmental factors (light) act upon the conservation degree of textile objects impregnated with silver nanoparticles. All these procedures are eco-friendly and do not cause any damage to the constituent material of the fabrics. The use of the hyperspectral imaging technique proved the permeation of both 30 and 70 ppm silver nanosuspensions into the textile, producing changes in the textile’s reflectance spectrum after being treated with them. The results showed anti-bactericidal/fungal properties of both silver nanoparticles and lye. Microbiological analyses revealed that bacterial colonies were reduced to more than 95% in both cases. The antibacterial effect of silver nanoparticles on the textile material of the blouse was maintained throughout the duration of the study, and under normal environmental conditions, the effects would remain active for a long period.
With the constant availability of new designs at extremely low prices, the production and disposal of clothing have increased significantly, leading to the need for the sustainable management of processes. The implementation of established craft practices in modern sustainable mass production requires the development and application of software and hardware computer tools as well as production machinery. Although the management of textile waste for interior design articles is addressed in the scientific literature by various techniques, there is still limited data and strategies based on the use of specific algorithms. Therefore, in this research, an algorithm is proposed, with the help of which textile waste resulting from upholstery production can be reused in the creation of interior decoration parts. The algorithm is implemented in the GNU Octave 6.4 programming environment, which makes it easily redistributable and accessible. The algorithm consists of a total of six stages, offering an option for arranging the textile elements and analyzing their color characteristics. The arrangement is performed with a Voronoi diagram, and the colors are represented by a four-color circle. Moreover, data on waste textile fabrics are presented, as well as their application in the conception of interior design elements. The proposed algorithm allows designers to focus on the visual design rather than compatibility checks and constraints. The present paper provides an algorithm for reusing textile wastes, which come in a variety of shapes and colors and are produced throughout the fabric cutting phase of upholstery manufacturing, in order to identify the most optimal combinations in matching irregular waste shapes and combinations of colors, create a suitable pattern for new interior design items, and contribute to improving the sustainable management of textile waste that is produced in considerable amounts.