Anodization behaviors of AZ91 magnesium alloys in strongly alkaline solutions with and without the addition of fluorine ions have been studied with the emphasis on the effect of the phase. In the absence of ions, the potential of the cell was relatively low and sparks were absent throughout galvanostatic anodizing at a current density of . After 10 min of anodization, a significant preferential anodization within an α matrix resulted in a nonuniform anodic film in regions of large hemispherical pits. ions in strongly alkaline solutions resulted in a marked increase in the cell potential and induced sparks on the alloy. These effects associated with ions are likely due to the formation of Mg and Al fluorides, which effectively retards the preferential surface attacks in a strongly alkaline solution. Finally, the anodic film formed without sparking was mainly Mg hydroxide, whereas that resulting from sparking was primarily Mg oxide.
Reduced graphene oxide (rGO) and/or polypyrrole (PPy) are mixed with chitosan (CS) binder materials for screen-printing supercapacitors (SCs) on arc atmospheric-pressure plasma jet (APPJ)-treated carbon cloth. The performance of gel-electrolyte rGO/CS, PPy/CS, and rGO/PPy/CS SCs processed by a dielectric barrier discharge plasma jet (DBDjet) was assessed and compared. DBDjet processing improved the hydrophilicity of these three nanocomposite electrode materials. Electrochemical measurements including electrical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic charging-discharging (GCD) were used to evaluate the performance of the three types of SCs. The Trasatti method was used to evaluate the electric-double layer capacitance (EDLC) and pseudocapacitance (PC) of the capacitance. The energy and power density of the three types of SCs were illustrated and compared using Ragone plots. Our experiments verify that, with the same weight of active materials, the combined use of rGO and PPy in SCs can significantly increase the capacitance and improve the operation stability.