Guliya R. Nizameeva

Dr. Guliya R. Nizameeva


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 April 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
PPPedro Alonso Jimenez Padilla
Pedro Alonso Jimenez Padilla
RDRichatd Djimasbe
Richatd Djimasbe
Rustem ZairovRustem Zairov
Rustem Zairov
Chengdong YuanChengdong Yuan
Chengdong Yuan
AAAmeen A. Al-Muntaser
Ameen A. Al-Muntaser
Almaz Linarovich ZinnatullinAlmaz Linarovich Zinnatullin
Almaz Linarovich Zinnatullin
In this study, Nickel oxide-based catalysts (NixOx) were synthesized and used for the in-situ upgrading process of heavy crude oil (viscosity 2157 mPa·s, and API gravity of 14.1° at 25 °C) in aquathermolysis conditions for viscosity reduction and heavy oil recovery. All characterizations of the obtained nanoparticles catalysts (NixOx) were performed through Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), X-Ray and Diffraction (XRD), and ASAP 2400 analyzer from Micromeritics (USA), methods. Experiments of catalytic and non-catalytic upgrading processes were carried out in a discontinuous reactor at a temperature of 300 °C and 72 bars for 24 h and 2% of catalyst ratio to the total weight of heavy crude oil. XRD analysis revealed that the use of nanoparticles of NiO significantly participated in the upgrading processes (by desulfurization) where different activated form catalysts were observed, such as α-NiS, β-NiS, Ni3S4, Ni9S8, and NiO. The results of viscosity analysis, elemental analysis, and 13C NMR analysis revealed that the viscosity of heavy crude oil decreased from 2157 to 800 mPa·s, heteroatoms removal from heavy oil ranged from S—4.28% to 3.32% and N—0.40% to 0.37%, and total content of fractions (ΣC8–C25) increased from 59.56% to a maximum of 72.21%, with catalyst-3 thank to isomerization of normal and cyclo-alkanes and dealkylation of lateral chains of aromatics structures, respectively. Moreover, the obtained nanoparticles showed good selectivity, promoting in-situ hydrogenation-dehydrogenation reactions, and hydrogen redistribution over carbons (H/C) is improved, ranging from 1.48 to a maximum of 1.77 in sample catalyst-3. On the other hand, the use of nanoparticle catalysts have also impacted the hydrogen production, where the H2/CO provided from the water gas shift reaction has increased. Nickel oxide catalysts have the potential for in-situ hydrothermal upgrading of heavy crude oil because of their great potential to catalyze the aquathermolysis reactions in the presence of steam.

30 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
DBDmitriy Burmistrov
Dmitriy Burmistrov
DSDmitriy Alexandrovich Serov
Dmitriy Alexandrovich Serov
IBIlya Baimler
Ilya Baimler
AGAnn Gritsaeva
Ann Gritsaeva
Pavel P. ChapalaPavel P. Chapala
Pavel P. Chapala
Sergey V. GudkovSergey V. Gudkov
Sergey V. Gudkov
New materials for additive manufacturing are currently being actively studied, which both have the necessary physicochemical properties and are safe for the environment and living organisms. We have proposed a simple process for the production of composite materials based on a transparent polymethyl methacrylate-like photopolymer resin modified with metallic titanium nanoparticles. Standardized plate samples were printed from the obtained modified photopolymer resins using mask stereolithography with an LED light source array (MSLA), and their mechanical properties were evaluated. Plates were also printed, for which the surface topology, distribution of nanoparticles in the polymer matrix, chemical structure, optical properties, chemical structure, and optical properties were characterized. In the context of the impact on biological systems, the ability of materials to enhance the formation of ROS and affect the main biomacromolecules was demonstrated. At the same time, the developed composite materials inhibit the growth of E. coli bacterial cells, and the bactericidal effect of the surfaces of the obtained materials was shown. Despite the significant antibacterial properties of the synthesized materials, no negative impact on the growth and development of adhesive cultures of eukaryotic cells in vitro was detected.

Verified
Journal Article
Open access
PDF file
AMAnton Muravev
Anton Muravev
AYAyrat Yakupov
Ayrat Yakupov
TGTatiana Gerasimova
Tatiana Gerasimova
RNRamil Nugmanov
Ramil Nugmanov
ETEkaterina Trushina
Ekaterina Trushina
IAIgor S Antipin
Igor S Antipin
Understanding the interaction of ions with organic receptors in confined space is of fundamental importance and could advance nanoelectronics and sensor design. In this work, metal ion complexation of conformationally varied thiacalix[4]monocrowns bearing lower-rim hydroxy (type I), dodecyloxy (type II), or methoxy (type III) fragments was evaluated. At the liquid–liquid interface, alkylated thiacalixcrowns-5(6) selectively extract alkali metal ions according to the induced-fit concept, whereas crown-4 receptors were ineffective due to distortion of the crown-ether cavity, as predicted by quantum-chemical calculations. In type-I ligands, alkali-metal ion extraction by the solvent-accessible crown-ether cavity was prevented, which resulted in competitive Ag+ extraction by sulfide bridges. Surprisingly, amphiphilic type-I/II conjugates moderately extracted other metal ions, which was attributed to calixarene aggregation in salt aqueous phase and supported by dynamic light scattering measurements. Cation–monolayer interactions at the air–water interface were monitored by surface pressure/potential measurements and UV/visible reflection–absorption spectroscopy. Topology-varied selectivity was evidenced, towards Sr2+ (crown-4), K+ (crown-5), and Ag+ (crown-6) in type-I receptors and Na+ (crown-4), Ca2+ (crown-5), and Cs+ (crown-6) in type-II receptors. Nuclear magnetic resonance and electronic absorption spectroscopy revealed exocyclic coordination in type-I ligands and cation–π interactions in type-II ligands.

Verified
Journal Article
Open access
PDF file
INIrek Nizameev
Irek Nizameev
DKDanis M. Kadirov
Danis M. Kadirov
GNGuliya R. Nizameeva
Guliya R. Nizameeva
ASAigul’ F. Sabirova
Aigul’ F. Sabirova
KKKirill Kholin
Kirill Kholin
MKMarsil Kakhirovich Kadirov
Marsil Kakhirovich Kadirov
A number of nickel complexes of sodium pectate with varied Ni2+ content have been synthesized and characterized. The presence of the proton conductivity, the possibility of the formation of a dense spatial network of transition metals in these coordination biopolymers, and the immobilization of transition ions in the catalytic sites of this class of compounds make them promising for proton-exchange membrane fuel cells. It has been established that the catalytic system composed of a coordination biopolymer with 20% substitution of sodium ions for divalent nickel ions, Ni (20%)-NaPG, is the leading catalyst in the series of 5, 15, 20, 25, 35% substituted pectates. Among the possible reasons for the improvement in performance the larger specific surface area of this sample compared to the other studied materials and the narrowest distribution of the vertical size of metal arrays were registered. The highest activity during CV and proximity to four-electron transfer during the catalytic cycle have also been observed for this compound.

10 December 2025 in Russian Journal of General Chemistry
Verified
Journal Article
Closed access
PDF file
Sergey V. GudkovSergey V. Gudkov
Sergey V. Gudkov
AAA. V. Antipov
A. V. Antipov
MAMaksim Astashev
Maksim Astashev
VBV. L. Baybursky
V. L. Baybursky
IBI. V. Baimler
I. V. Baimler
OSOleg Sinyashin
Oleg Sinyashin
The manuscript discusses non-standard scientific and technological solutions for environmental monitoring, neutralization and subsequent deep processing of industrial and municipal waste. The manuscript is divided into three major sections devoted to monitoring, detoxification and processing of environmental pollutants. The following non-standard technological solutions for environmental monitoring are considered: Laser express chemical analysis; Laser remote sensing; Chemoresistive gas sensors for monitoring atmospheric conditions; Multi-beam optical analyzer for detection of microorganisms and organic pollutants. For neutralization of environmental pollutants, the following are considered: Modern catalysts for air purification from nitrogen and sulfur oxides; Adsorbents for carbon dioxide absorption; Advanced oxidation processes for purification of airport stormwater runoff; Advanced low-temperature plasma technologies; Catalysts for combustion of sewage sludge from municipal treatment facilities; Modern composite multifunctional polymer materials. Among technological solutions for deep processing of industrial and municipal waste, the following are considered: Nickel pincer complexes as electrocatalysts for molecular hydrogen evolution; Hydrogen sulfide-methane reforming for molecular hydrogen production; Technology of catalytic conversion of lignin-containing waste into adsorbents and fuel; New bacterial consortia for sewage sludge processing.

21 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Rustem ZairovRustem Zairov
Rustem Zairov
ADAlexey Pavlovich Dovzhenko
Alexey Pavlovich Dovzhenko
NTNatalia Terekhova
Natalia Terekhova
TKTimur Kornev
Timur Kornev
YZYing Zhou
Ying Zhou
Asiya MustafinaAsiya Mustafina
Asiya Mustafina
The present work demonstrates the optimization of the ligand structure in the series of bis(phosphine oxide) and β-ketophosphine oxide representatives for efficient coordination of Tb3+ and Eu3+ ions with the formation of the complexes exhibiting high Tb3+- and Eu3+-centered luminescence. The analysis of the stoichiometry and structure of the lanthanide complexes obtained using the XRD method reveals the great impact of the bridging group nature between two phosphine oxide moieties on the coordination mode of the ligands with Tb3+ and Eu3+ ions. The bridging imido-group facilitates the deprotonation of the imido- bis(phosphine oxide) ligand followed by the formation of tris-complexes. The spectral and PXRD analysis of the separated colloids indicates that the high stability of the tris-complexes provides their safe conversion into polystyrenesulfonate-stabilized colloids using the solvent exchange method. The red Eu3+-centered luminescence of the tris-complex exhibits the same specificity in the solutions and the colloids. The pronounced luminescent response on the antibiotic ceftriaxone allows for sensing the latter in aqueous solutions with an LOD value equal to 0.974 μM.