Charles C. Nguyen

Dr. Charles C. Nguyen

orcid

Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Tu DuongTu Duong
Tu Duong
CNCharles C. Nguyen
Charles C. Nguyen
Thien Duc TranThien Duc Tran
Thien Duc Tran
Control of closed-kinematic chain manipulators (CKCM) with uncertain dynamics is a tremendous challenge due to the synchronization among actual joints and end-effectors, limited workspace, and nonexistent closed-form solutions of forward kinematics. This paper proposes a synchronization control scheme based on the concept of sliding mode control (SMC) developed for CKCMs called nonsingular fast terminal sliding mode control (NFTSMC) in conjunction with the time-delay estimation (TDE) method to address the above issues. First, the cross-coupling error is derived by combining position errors and synchronization errors to achieve the synchronization goal and then used to form a sliding mode surface of the NFTSMC. After that, a control law is developed based on the sliding mode surface to ensure faster asymptotic convergence of the errors of both position and synchronization of the CKCMs in a finite and minimal time. Then, the TDE control scheme with no prior knowledge of manipulator dynamics is employed to estimate the unknown dynamics and disturbances and thereby reject the effects of chattering caused by the NFTSMC. Lyapunov stability theorem is employed to show that the overall system controlled by the proposed control scheme achieves asymptotic convergence of errors and system stability. The performance of the proposed control is assessed by computer simulation on a 2 degrees-of-freedom (DOF) planar CKCM manipulator and simulation results are presented and discussed.

3 November 2025 in Machines
Verified
Journal Article
Open access
PDF file
LSLu Sun
Lu Sun
MSMohammad Seyedkazemi
Mohammad Seyedkazemi
CNCharles C. Nguyen
Charles C. Nguyen
JZJaiden Zhang
Jaiden Zhang
This study provides a comprehensive review of advancements in the field of train–track–subway system interaction dynamics and suggests future directions for research and development. Mathematical modeling of train–track–subway interaction system is addressed, including wheel–track contact mechanics and wear, train multibody dynamics, train–track system coupling dynamics, track slab subsystem dynamics, subway tunnel–ground interaction models, building vibration excited by ground-borne seismic waves, and noise. Advanced computing and simulation techniques used for numerical studies of the dynamics of train–track–subway system interaction in the past two decades are also addressed, including high-performance computing with efficient algorithms, multi-physics and multi-scale simulation, real-time hardware-in-the-loop simulation, and laboratory and field validation. The study extends the applications of train–track–subway interaction dynamics to subway route planning, structural and material design, subway maintenance, operations safety and reliability, and passenger comfort. Emerging technologies and future perspectives are also reviewed and discussed, including artificial intelligence, smart sensing and real-time monitoring, digital twin technology, and sustainable design integration.

7 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Tu DuongTu Duong
Tu Duong
CNCharles C. Nguyen
Charles C. Nguyen
Thien Duc TranThien Duc Tran
Thien Duc Tran
Closed-Kinematic Chain Manipulators (CKCM) have gained attention due to their precise Cartesian motion capability through coordinated active joint movements. Furthermore, ensuring synchronization among the joints of CKCMs is critical for reliable operation. An advanced control scheme for CKCMs that combines Nonsingular Fast Terminal Sliding Mode Control (NFTSMC) with Time Delay Estimation (TDE) while utilizing synchronization errors, namely Syn-TDE-NFTSMC, to effectively address joint errors in CKCMs was developed. NFTSMC enables fast convergence through nonlinear terminal sliding while TDE eliminates the need for prior knowledge of the robot’s dynamics, thereby simplifying its implementation and reducing its computational requirements. It is known that the inclusion of TDE reduces about 98% of the computational requirement of control schemes without TDE. The newly developed control scheme was rigorously evaluated using computer simulation and its control performance was compared with that of existing control methods. This paper presents an experimental study where the newly developed control scheme and other existing control schemes were applied to a real CKCM with 2 degrees of freedom (DOF). The experimental results confirm that the control scheme performed much better than other existing control schemes in terms of synchronization and control performance, achieving a reduction in maximum tracking errors of up to 81% as compared to other existing control schemes. The results confirm the efficacy of the newly developed control scheme in enhancing control precision and system stability, making it a promising solution for improving CKCM control strategies in real-world applications.

18 April 2025 in Machines
Verified
Journal Article
Open access
PDF file
TNTri T. Nguyen
Tri T. Nguyen
CNCharles C. Nguyen
Charles C. Nguyen
TNTuan Nguyen
Tuan Nguyen
Tu DuongTu Duong
Tu Duong
HNHa Tang T Ngo
Ha Tang T Ngo
LSLu Sun
Lu Sun
This paper presents a new decentralized adaptive control scheme for motion control of robot manipulators built based on a closed-kinematic chain mechanism (CKCM). By employing the synchronization technique and model reference adaptive control (MRAC) based on the Lyapunov direct method, the Decentralized Adaptive Synchronized Control scheme (DASCS) is developed. The DASCS can ensure global asymptotic convergence of tracking errors while forcing all active joints to move in a predefined synchronous manner in the presence of uncertainties and sudden changes in payload. Furthermore, the control scheme has a simple structure, independent of the manipulator’s dynamic model, ensuring computational efficiency. Results of computer simulations conducted to evaluate the performance of the control scheme applied to controlling the motion of a CKCM manipulator with six degrees of freedom are reported and discussed.

17 March 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
TNTri Nguyen
Tri Nguyen
CNCharles C. Nguyen
Charles C. Nguyen
TNTuan Nguyen
Tuan Nguyen
Tu DuongTu Duong
Tu Duong
HNHa Tang T Ngo
Ha Tang T Ngo
LSLu Sun
Lu Sun
This paper presents a new decentralized adaptive control scheme for motion control of robot manipulators built based closed-kinematic chain mechanism (CKCM). By employing the synchronization technique and model reference adaptive control (MRAC) based on the Lyapunov direct method, the Decentralized Adaptive Synchronized Control (DASC) scheme is developed. The DASC scheme can ensure global asymptotic convergence of tracking errors while forcing all active joints to move in a predefined synchronous manner in the presence of uncertainties and sudden changes in payload. In addition, the control scheme has a simple structure that does not depend on the knowledge of the dynamic mathematical model of a robot manipulator resulting in computational efficiency of control scheme implementation. Results of computer simulation conducted to evaluate the performance of the control scheme applied to control the motion of a CKCM manipulator with 6 degrees of freedom are reported and discussed.

13 January 2026 in Eng
Verified
Journal Article
Open access
PDF file
HNHa Tang T Ngo
Ha Tang T Ngo
CNCharles C. Nguyen
Charles C. Nguyen
Tu DuongTu Duong
Tu Duong
TNTri T. Nguyen
Tri T. Nguyen
Robot-assisted rehabilitation has demonstrated significant efficacy in improving motor function among patients with physical and neurological impairments. The development of effective rehabilitation robots requires careful integration of mechanical design and control systems to ensure safe, compliant, and intention-oriented human–robot interaction while delivering appropriate therapeutic assistance and feedback. Parallel robot manipulators have increasingly gained attention in rehabilitation applications due to their superior precision, structural stiffness, and high load capacity compared to their serial counterparts. This paper presents a scoping review of control strategies specifically implemented in parallel rehabilitation robots between 2015 and 2025. The control strategies include position control, force control, compliance control, adaptive control, intelligent control, and hybrid control. Our analysis showed a progressive shift from traditional position-based control toward more sophisticated adaptive and intelligent strategies that better accommodate patient-specific needs and therapeutic requirements.