The thermal degradation of wood polymers (cellulose, hemicelluloses, and lignin) results in the production of volatile products, some of which are toxic or act as irritants. In the present work, we focus on the effect of wood treatment on the formation of volatile products, conducting experiments on thermally treated (TTW), flame-retardant-treated (FRW), and untreated (REF) spruce wood. The samples were subjected to thermal loading at 150 °C, 200 °C, and 250 °C with the subsequent collection of degradation products. We evaluated the effect of wood treatment on the formation of volatile organic compounds (VOCs) using gas chromatography–mass spectrometry (GC-MS). The number and quantity of VOCs are significantly affected by the type of wood treatment and the thermal loading temperature. At the temperature of 250 °C, the concentration and number of VOCs increased significantly. The highest number of VOCs was identified in the untreated wood samples (54 compounds, mostly aldehydes, ketones, and phenols), with a lower number being identified in the flame-retardant-treated samples (9 compounds, mainly furfural) and the lowest number being identified in thermally treated wood samples (3 compounds, aliphatic hydrocarbons). Typical volatile products included furfural, furfurylalcohol, and α-pinene. Qualitative and quantitative analysis of VOCs under thermal loading is important in evaluating the wood burning process and the toxic properties of the consequent gaseous products.
Wood, which is flammable, is commonly used as a building material and can be improved using a suitable surface treatment. A promising coating solution is polyurea, featuring properties like flexibility, mechanical resistance, resistance against water, etc., but it is also easily flammable. Expandable graphite (EG) is effective as a flame retardant and environmentally suitable. In this study, we studied the suitability of polyurea improved with EG. Spruce wood samples with dimensions of 50 mm × 40 mm × 10 mm were divided into eight groups, each including five samples. Each group was subjected to two applications of polyurea and EG in various combinations to examine the best combination with the lowest mass loss. The second component of the experiments aimed to examine the effectiveness of EG, which was applied in different weights. During the experiments, samples were thermally loaded in an apparatus for 10 min, where a heat flux of 30 kW·m−2 was applied to the sample surface and the mass loss was continuously recorded. Lastly, thermal analysis was performed. The best results were observed for the combination of NEOPROOF mixed with 0.3 g of EG covered with NEODUR. The thermal analysis results revealed substantial differences: NEOPROOF, a polyurea, had only one degradation step, while NEODUR, which also contained polyurethanes, decomposed in several steps.
During the burning of wood, various toxic compounds are produced; therefore, fire retardants are used. However, fire retardants also produce toxic compounds, so the effort is to find low-cost, efficient, and environmentally friendly alternatives. We combined a highly durable polyurea (P) coating with expandable graphite (EG), which is very effective against fire. We thermally loaded untreated spruce wood and specimens treated with different coating combinations using an infrared heater. Volatile compounds were analysed by gas chromatography coupled with mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC). Various groups of volatile substances were determined, including terpenes (alpha- and beta-pinene, limonene), acids (formic, acetic), carbonyl compounds (formaldehyde, acetaldehyde, furfural, 5-hydroxymethylfurfural), and sulfur trioxide. The addition of EG to polyurea significantly increases the resistance of spruce wood to thermal loading while simultaneously reducing the amount of arisen volatile gases. An optimal combination of EG and P was identified to ensure effective thermal resistance and low concentrations of evolved gases.