Veronika Veľková

Dr. Veronika Veľková


Research Focus & Metrics

Representative Publications

View All Publications
25 March 2025 in Polymers
Verified
Journal Article
Open access
PDF file
KTKatarína Trojanová
Katarína Trojanová
VVVeronika Veľková
Veronika Veľková
František KačíkFrantišek Kačík
František Kačík
The thermal degradation of wood polymers (cellulose, hemicelluloses, and lignin) results in the production of volatile products, some of which are toxic or act as irritants. In the present work, we focus on the effect of wood treatment on the formation of volatile products, conducting experiments on thermally treated (TTW), flame-retardant-treated (FRW), and untreated (REF) spruce wood. The samples were subjected to thermal loading at 150 °C, 200 °C, and 250 °C with the subsequent collection of degradation products. We evaluated the effect of wood treatment on the formation of volatile organic compounds (VOCs) using gas chromatography–mass spectrometry (GC-MS). The number and quantity of VOCs are significantly affected by the type of wood treatment and the thermal loading temperature. At the temperature of 250 °C, the concentration and number of VOCs increased significantly. The highest number of VOCs was identified in the untreated wood samples (54 compounds, mostly aldehydes, ketones, and phenols), with a lower number being identified in the flame-retardant-treated samples (9 compounds, mainly furfural) and the lowest number being identified in thermally treated wood samples (3 compounds, aliphatic hydrocarbons). Typical volatile products included furfural, furfurylalcohol, and α-pinene. Qualitative and quantitative analysis of VOCs under thermal loading is important in evaluating the wood burning process and the toxic properties of the consequent gaseous products.

1 November 2025 in Fire
Verified
Journal Article
Open access
PDF file
IMIveta Mitterova
Iveta Mitterova
VVVeronika Veľková
Veronika Veľková
Andrea MajlingovaAndrea Majlingova
Andrea Majlingova
In this study, we evaluate a phosphorus-based fire retardant (HR Prof) on Norway spruce using Simultaneous Thermal Analysis (STA: TG/DTG/DSC), Gas Chromatography–Mass Spectrometry (GC–MS), and bench-scale mass-loss measurements. Relative to the untreated reference, HR Prof re-routes decomposition toward earlier dehydration and transient char, simplifies the evolved gas mixture in the 150–250 °C range, and reduces burning intensity during 600 s of radiant exposure. Across 150/200/250 °C, identified components fell from 20/24/51 (reference) to 5/9/9 (HR Prof); no phosphorus-containing volatiles were detected in this window. Mass-loss tests showed a lower average burning rate (0.107 vs. 0.156%·s−1) and a smaller cumulative loss at 600 s (64.2 ± 9.5% vs. 93.7 ± 2.1%; one-way ANOVA, p < 0.05 for percentage loss). STA was conducted in air; the transient char formed at an intermediate temperature is oxidized near ~600 °C, explaining the low final residue despite earlier charring. A count-based Poisson model corroborated the significant reduction in volatile component richness for HR Prof (p < 0.001). The cross-method correspondences—earlier condensed-phase dehydration/char → leaner volatile pool → lower and flatter burning-rate profiles—support a condensed-phase-dominated protection mechanism within the conditions studied.

6 November 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
KTKatarína Trojanová
Katarína Trojanová
VVVeronika Veľková
Veronika Veľková
EKElena Kmeťová
Elena Kmeťová
František KačíkFrantišek Kačík
František Kačík
During the burning of wood, various toxic compounds are produced; therefore, fire retardants are used. However, fire retardants also produce toxic compounds, so the effort is to find low-cost, efficient, and environmentally friendly alternatives. We combined a highly durable polyurea (P) coating with expandable graphite (EG), which is very effective against fire. We thermally loaded untreated spruce wood and specimens treated with different coating combinations using an infrared heater. Volatile compounds were analysed by gas chromatography coupled with mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC). Various groups of volatile substances were determined, including terpenes (alpha- and beta-pinene, limonene), acids (formic, acetic), carbonyl compounds (formaldehyde, acetaldehyde, furfural, 5-hydroxymethylfurfural), and sulfur trioxide. The addition of EG to polyurea significantly increases the resistance of spruce wood to thermal loading while simultaneously reducing the amount of arisen volatile gases. An optimal combination of EG and P was identified to ensure effective thermal resistance and low concentrations of evolved gases.