Zinc-based alloys are promising candidates for biodegradable implant applications; however, their rapid initial corrosion and limited cytocompatibility remain major challenges. In this study, a Zn-Ca-P layer in a form of parascholzite (CaZn2(PO4)2·2H2O) was prepared on a Zn-0.8Mg-0.2Sr alloy via anodic oxidation followed by short-time biomimetic calcium–phosphate deposition. The formation mechanism, corrosion behaviour, and preliminary biological response of the modified surface were systematically investigated. The Zn-Ca-P layer formed a compact and crystalline phosphate layer that significantly altered the corrosion response of the zinc substrate in Leibovitz L-15 medium containing foetal bovine serum. Electrochemical measurements revealed a pronounced improvement in corrosion resistance and a transition from rapid active dissolution to a controlled, ion-exchange-driven degradation mechanism. The moderate solubility of parascholzite enabled the gradual release of Zn2+ and Ca2+ ions while maintaining surface stability during immersion. Preliminary cell adhesion experiments demonstrated a clear enhancement of cytocompatibility for the Zn-Ca-P-layer-coated samples, where cells readily adhered and spread, in contrast to the bare alloy surface, which showed lower cell attachment. The improved biological response is attributed to the phosphate-rich surface chemistry, favourable surface morphology, and moderated corrosion behaviour. Overall, the parascholzite-like layer provides an effective strategy with which to regulate both corrosion and early cell–material interactions of zinc-based biodegradable alloys, highlighting its potential for temporary biomedical implant applications.
Orthopaedic surgeries like total hip and knee arthroplasty play a crucial role in restoring joint function for individuals with osteoarthritis. Deep bacterial infections are one of the most serious complications for orthopaedic implants. An infectious complication of an orthopaedic implant requires long-term and demanding treatment, often with repeated surgical procedures, and can lead to serious consequences such as implant failure, sepsis, and even death. Early detection of complications is of key importance for efficient therapy. The objective of this work is to investigate the possibilities of the nanotubular TiNbTa oxide for pH change sensing. Different surface treatments which lead to different surface natures were tested. For experiments, the inflammation was simulated by pH changes in the physiological solution. The response of the surface was monitored via the electrode potential changes. The results show that the nanotubular surface prepared on the TiNbTa alloy is a good possible candidate for pH sensing devices.
Biodegradable zinc-based alloys have recently attracted attention as promising candidates for temporary implant applications due to their favourable corrosion behaviour and biocompatibility. In this study, three materials — pure Zn, Zn