Jan Pokorný

Mr. Jan Pokorný

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
JPJan Pokorný
Jan Pokorný
JKJiri Kubasek
Jiri Kubasek
ČDČrtomir Donik
Črtomir Donik
DNDavid Nečas
David Nečas
VHVojtech Hybasek
Vojtech Hybasek
MGMatjaž Godec
Matjaž Godec
This study explores the mechanical and corrosion properties of yttria-reinforced 316L stainless steel. Powder precursor materials were prepared using mechanical alloying. Varying yttria (Y2O3) contents (1, 3, and 5 wt%) were used to assess its impact on the steel’s properties. X-ray diffraction and scanning electron microscopy confirmed the successful dispersion of Y2O3 within the matrix, with the formation of chromium carbides during spark plasma sintering (SPS). The mechanical properties, including hardness and compressive yield strength, improved with increasing Y2O3 contents, with the highest strength observed in the 316L-5Y2O3 sample. However, corrosion resistance decreased with higher yttria concentrations. The 3 wt% Y2O3 sample exhibited the highest corrosion rate due to localized corrosion in areas enriched with oxide particles and chromium carbides. Electrochemical testing revealed that carbide formation and Cr-depleted regions from SPS processing contributed to the corrosion behaviour. These findings suggest that while yttria reinforcement enhances mechanical strength, optimizing the Y2O3 content and processing methods is crucial to balance both mechanical and corrosion performance in ODS 316L stainless steel.

21 January 2026 in Materials
Verified
Journal Article
Open access
PDF file
JFJaroslav Fojt
Jaroslav Fojt
JVJakub Veselý
Jakub Veselý
JŠJan Šťovíček
Jan Šťovíček
JPJan Pokorný
Jan Pokorný
EJEva Jablonska
Eva Jablonska
VHVojtech Hybasek
Vojtech Hybasek
Zinc-based alloys are promising candidates for biodegradable implant applications; however, their rapid initial corrosion and limited cytocompatibility remain major challenges. In this study, a Zn-Ca-P layer in a form of parascholzite (CaZn2(PO4)2·2H2O) was prepared on a Zn-0.8Mg-0.2Sr alloy via anodic oxidation followed by short-time biomimetic calcium–phosphate deposition. The formation mechanism, corrosion behaviour, and preliminary biological response of the modified surface were systematically investigated. The Zn-Ca-P layer formed a compact and crystalline phosphate layer that significantly altered the corrosion response of the zinc substrate in Leibovitz L-15 medium containing foetal bovine serum. Electrochemical measurements revealed a pronounced improvement in corrosion resistance and a transition from rapid active dissolution to a controlled, ion-exchange-driven degradation mechanism. The moderate solubility of parascholzite enabled the gradual release of Zn2+ and Ca2+ ions while maintaining surface stability during immersion. Preliminary cell adhesion experiments demonstrated a clear enhancement of cytocompatibility for the Zn-Ca-P-layer-coated samples, where cells readily adhered and spread, in contrast to the bare alloy surface, which showed lower cell attachment. The improved biological response is attributed to the phosphate-rich surface chemistry, favourable surface morphology, and moderated corrosion behaviour. Overall, the parascholzite-like layer provides an effective strategy with which to regulate both corrosion and early cell–material interactions of zinc-based biodegradable alloys, highlighting its potential for temporary biomedical implant applications.

26 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
Filip PrůšaFilip Průša
Filip Průša
Andrzej RomańskiAndrzej Romański
Andrzej Romański
Marzanna KsiazekMarzanna Ksiazek
Marzanna Ksiazek
HTHana Thürlová
Hana Thürlová
DTDorota Tyrala
Dorota Tyrala
Lucyna JaworskaLucyna Jaworska
Lucyna Jaworska
This study investigates the optimization of hot-pressing parameters for ASP60 high-speed steel composites incorporating CuSn20 bronze alloy for use in diamond-reinforced tool applications. ASP60 and CuSn20 powders were characterized using XRD, XRF, DSC, SEM, and laser diffraction. The effects of CuSn20 addition at varying concentrations and compaction temperatures (950–1050 °C) on porosity, mechanical properties, and tribological performance were evaluated. Results showed that adding CuSn20 significantly reduced residual porosity due to its partial melting during compaction, which facilitated particle rearrangement and densification. Optimal conditions were identified at 1050 °C with 9.8 wt.% CuSn20, yielding minimal porosity (~3.7%) and the highest bending strength (374.51 ± 36.73 MPa). The optimized matrix was further reinforced with TiC-coated diamond particles at concentration c = 20, producing a composite material with excellent wear resistance, despite minor defects in the TiC coating observed on fracture surfaces. Tribological testing demonstrated that CuSn20 consistently lowered friction coefficients across all tested temperatures due to its self-lubricating properties and partial melting at elevated temperatures. Furthermore, ASP60 exhibited no measurable wear, making it a promising candidate for highly demanding applications. Overall, the study demonstrates that CuSn20 alloy enhances densification, mechanical performance, and tribological behavior of ASP60-based composites, indicating their strong potential for aggressive wire sawing and stone-cutting tool applications.

23 January 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
JKJiri Kubasek
Jiri Kubasek
JPJan Pokorný
Jan Pokorný
ČDČrtomir Donik
Črtomir Donik
DNDavid Nečas
David Nečas
VHVojtech Hybasek
Vojtech Hybasek
JČJaroslav Čapek
Jaroslav Čapek
This study explores the mechanical and corrosion properties of yttria-reinforced 316L stainless steel. Powder precursor materials were prepared using mechanical alloying. Varying yttria (Y₂O₃) content (1, 3, and 5 wt%) was used to assess its impact on the steel’s properties. X-ray diffraction and scanning electron microscopy confirmed the successful dispersion of Y₂O₃ within the matrix, with the formation of chromium carbides during spark plasma sintering (SPS). The mechanical properties, including hardness and compressive yield strength, improved with increasing Y₂O₃ content, with the highest strength observed in the 316L-5Y₂O₃ sample. However, corrosion resistance decreased with higher yttria concentrations. The 3 wt% Y₂O₃ sample exhibited the highest corrosion rate due to localized corrosion in areas enriched with oxide particles and chromium carbides. Electrochemical testing revealed that carbide formation and Cr-depleted regions from SPS processing contributed to the corrosion behavior. These findings suggest that while yttria reinforcement enhances mechanical strength, optimizing Y₂O₃ content and processing methods is crucial to balance both mechanical and corrosion performance in ODS 316L stainless steel.

23 December 2025 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
ABAnna Boukalová
Anna Boukalová
DNDavid Nečas
David Nečas
DDDrahomír Dvorský
Drahomír Dvorský
JŠJan Šťovíček
Jan Šťovíček
JPJan Pokorný
Jan Pokorný
JKJiri Kubasek
Jiri Kubasek
Biodegradable zinc-based alloys have recently attracted attention as promising candidates for temporary implant applications due to their favourable corrosion behaviour and biocompatibility. In this study, three materials — pure Zn, Zn