Wouter vd Brink

Mr. Wouter vd Brink

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 November 2024 in Composite Structures
Verified
Journal Article
Open access
NHNiels van Hoorn
Niels van Hoorn
STSergio Turteltaub
Sergio Turteltaub
CKC. Kassapoglou
C. Kassapoglou
WBWouter vd Brink
Wouter vd Brink

13 March 2025 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
WBWouter vd Brink
Wouter vd Brink
TKTim Koenis
Tim Koenis
TOTimo Osinga
Timo Osinga
MSMaria L. Montero Sistiaga
Maria L. Montero Sistiaga
The aviation industry, responsible for a significant portion of global CO2 emissions, faces the need to transition to more sustainable aircraft. Electric aircraft driven by battery-powered propulsion and further structural weight reductions have emerged as potential solutions. This research presents structural topology optimization methods developed at the Netherlands Aerospace Centre using (1) a hybrid approach with different scales for aircraft design, from component to full-scale aircraft. Furthermore, (2) multi-material designs are being explored in combination with additive manufacturing technology. Method 1: At the full aircraft level, the study employed a preliminary design methodology that combines shell and solid elements in a 3D model utilizing Abaqus software 2023. A topology optimization was carried out with strain energy and weight as the design responses, subject to specified volume and symmetry constraints. Different aircraft configurations were investigated, including blended wing designs, with each impacting the load paths and structural performance. A start was made in translating the optimized design to actual aerospace features such as frames and Door-Surround Structures (DSS). Method 2: The ability to manufacture multi-material metal parts via additive manufacturing presents opportunities for the design of aircraft components and shows weight-saving potential. The multi-material topology optimization method is explored for a relevant aerospace wing component. The results revealed widespread possibilities for general topology optimization methods to be applied in aircraft structural design at different scales. Load paths can be identified and their integration into multi-disciplinary design optimization (MDO) is promising. Novel structural designs for blended wing aircraft can be obtained for multiple load-cases. This research addresses questions concerning the aircraft-level and component-level feasibility of optimized designs, optimization features, inertia relief, and mesh size influence. The findings show the potential to optimize battery-powered aircraft through innovative structural design, contributing to a potentially lower weight and further reductions in environmental impact. This study serves as a first step towards lightweight future electric aircraft design and underscores the importance of integrating innovative solutions to reduce the climate impact of the aviation industry.

3 March 2022 in The Aeronautical Journal
Verified
Journal Article
Closed access
PDF file
AWA.J. de Wit
A.J. de Wit
WBWouter vd Brink
Wouter vd Brink
MMM. Moghadasi
M. Moghadasi
Unmanned Aerial Systems (UASs) are increasingly starting to dominate the lower airspace. This increases the chance that a UAS will hit the means of transport of people e.g. aircraft, helicopters. For air traffic, the European Union Aviation Safety Agency (EASA) and the Federal Aviation Administration (FAA) are in the process of determining the threat of a UAS impact on aircraft. This will result in new rules that may impose new, or additional, requirements on the ‘wetted zones’ of aircraft and the like. Current research suggests that aircraft wetted-areas (e.g. wing leading edge) that are certified for so called ‘bird-impact’ may not sustain a ‘UAS-impact’, such an UAS-impact may even damage the primary load carrying structure. But what would happen if multiple UASs are flying close to one other? To the authors’ knowledge, the damage caused by multiple UAS impacts on a wetted surface zone has not yet been established.A finite element modelling approach is chosen for the UAS; specifically, a Lagrangian approach is applied using material nonlinearity and damage. A comparison is made between the damage caused by a bird impactor and a UAS impactor model. To establish the resulting damage of multiple UAS impacts on a wing leading edge, a multiple-UAS impact scenario is executed. The results show that a wing leading edge capable of sustaining a bird impact may not be capable of sustaining a UAS impact, which supports previous findings. Furthermore, for all simulated cases the front spar was not penetrated by components that managed to enter the leading edge. However, for the heavier drone some deformation of the front spar was observed. The multiple UAS impact scenario causes additional damage to the leading edge with respect to the single UAS impact, with greater deformation of the front spar being observed.

1 January 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
MVMario Verhagen
Mario Verhagen
HTHuub Timmermans
Huub Timmermans
WBWouter vd Brink
Wouter vd Brink
Given operational restrictions of current firefighting aircraft, a novel concept is proposed within SCODEV. Launched within the Horizon 2020 Fast Track to Innovation framework, SCODEV considers a novel system that refills an aircraft’s water tanks during low altitude flight. The novel scooping system consists of a hose and a scoop that penetrate the water surface during low altitude flight. Though promising major benefits with respect to current firefighting aircraft, the design of such a novel scooping system poses significant and unique challenges. For safe and successful water scooping, it is paramount that the scooping system, consisting of the hose and scoop, maintains a stable shape when being lowered and at any extended position, that the hose maintains a desired shape with a sufficiently vertical attitude, and that the scoop maintains a desired attitude with respect to the airflow, before entering the water. Focusing on system prerequisites that allow for initiation of water ingestion, this paper does not consider system response during water ingestion, reel-in or fly-out. The hose and scoop are designed and assessed through simulations, taking into account the three aforementioned criteria. The scoop and hose are designed and assessed separately in the simulation environment. For the hose, quasi-dynamic aeroelastic analyses are performed by coupling the structural Abaqus solver with an external aerodynamic code and iterating for a hose shape in space. It is assessed whether the hose can maintain a stable shape while being lowered, and at full length. Secondly, it is assessed whether the hose can maintain a desired shape at full length, maintaining a sufficiently vertical attitude. For the scoop, aerial stability analyses have been performed using MSC Nastran. The scoop is designed to maintain a stable and desired orientation with respect to the oncoming airflow. Helicopter flight tests are performed to substantiate analytical results on hose and scoop stability, hose shape and scoop orientation. When the scoop and hose are tested separately, observed behaviour is in good agreement with simulation predictions; the hose remains stable and has a desired shape with sufficiently vertical attitude. The scoop similarly remains stable and maintains a desired orientation with respect to the incoming airflow. For the coupled system, system behaviour differs from analytical predictions. This highlights the need to consider the coupled system in the simulations instead of analysing both components separately.