ARACELI SANCHEZ JIMENEZ

ARACELI SANCHEZ JIMENEZ

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Agnes OomenAgnes Oomen
Agnes Oomen
EBEric A. J. Bleeker
Eric A. J. Bleeker
PBPeter Bos
Peter Bos
FBFleur Van Broekhuizen
Fleur Van Broekhuizen
SGStefania Gottardo
Stefania Gottardo
RLRobert Landsiedel
Robert Landsiedel
Physicochemical properties of chemicals affect their exposure, toxicokinetics/fate and hazard, and for nanomaterials, the variation of these properties results in a wide variety of materials with potentially different risks. To limit the amount of testing for risk assessment, the information gathering process for nanomaterials needs to be efficient. At the same time, sufficient information to assess the safety of human health and the environment should be available for each nanomaterial. Grouping and read-across approaches can be utilised to meet these goals. This article presents different possible applications of grouping and read-across for nanomaterials within the broader perspective of the MARINA Risk Assessment Strategy (RAS), as developed in the EU FP7 project MARINA. Firstly, nanomaterials can be grouped based on limited variation in physicochemical properties to subsequently design an efficient testing strategy that covers the entire group. Secondly, knowledge about exposure, toxicokinetics/fate or hazard, for example via properties such as dissolution rate, aspect ratio, chemical (non-)activity, can be used to organise similar materials in generic groups to frame issues that need further attention, or potentially to read-across. Thirdly, when data related to specific endpoints is required, read-across can be considered, using data from a source material for the target nanomaterial. Read-across could be based on a scientifically sound justification that exposure, distribution to the target (fate/toxicokinetics) and hazard of the target material are similar to, or less than, the source material. These grouping and read-across approaches pave the way for better use of available information on nanomaterials and are flexible enough to allow future adaptations related to scientific developments.

PBPeter Bos
Peter Bos
SGStefania Gottardo
Stefania Gottardo
JSJaneck J. Scott-Fordsmand
Janeck J. Scott-Fordsmand
MTMartie Van Tongeren
Martie Van Tongeren
Elena SemenzinElena Semenzin
Elena Semenzin
Agnes OomenAgnes Oomen
Agnes Oomen
An engineered nanomaterial (ENM) may actually consist of a population of primary particles, aggregates and agglomerates of various sizes. Furthermore, their physico-chemical characteristics may change during the various life-cycle stages. It will probably not be feasible to test all varieties of all ENMs for possible health and environmental risks. There is therefore a need to further develop the approaches for risk assessment of ENMs. Within the EU FP7 project Managing Risks of Nanoparticles (MARINA) a two-phase risk assessment strategy has been developed. In Phase 1 (Problem framing) a base set of information is considered, relevant exposure scenarios (RESs) are identified and the scope for Phase 2 (Risk assessment) is established. The relevance of an RES is indicated by information on exposure, fate/kinetics and/or hazard; these three domains are included as separate pillars that contain specific tools. Phase 2 consists of an iterative process of risk characterization, identification of data needs and integrated collection and evaluation of data on the three domains, until sufficient information is obtained to conclude on possible risks in a RES. Only data are generated that are considered to be needed for the purpose of risk assessment. A fourth pillar, risk characterization, is defined and it contains risk assessment tools. This strategy describes a flexible and efficient approach for data collection and risk assessment which is essential to ensure safety of ENMs. Further developments are needed to provide guidance and make the MARINA Risk Assessment Strategy operational. Case studies will be needed to refine the strategy.

JSJaneck J. Scott-Fordsmand
Janeck J. Scott-Fordsmand
WPWillie Peijnenburg
Willie Peijnenburg
Elena SemenzinElena Semenzin
Elena Semenzin
BNBernd Nowack
Bernd Nowack
NHNeil Hunt
Neil Hunt
KHKerstin Hund-Rinke
Kerstin Hund-Rinke
An Environmental Risk Assessment (ERA) for nanomaterials (NMs) is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i) materials, (ii) release, fate and exposure, (iii) hazard and (iv) risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES) and relevant exposure scenarios (RES) and, subsequently, the possible release routes, both with regard to which compartment(s) NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC), but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC), either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC) or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

18 October 2016 in Journal of Occupational and Environmental Hygiene
Verified
Journal Article
Closed access
AJARACELI SANCHEZ JIMENEZ
ARACELI SANCHEZ JIMENEZ
JVJulia Varet
Julia Varet
CPCraig Poland
Craig Poland
GFGordon J. Fern
Gordon J. Fern
SHSteven M. Hankin
Steven M. Hankin
MTMartie Van Tongeren
Martie Van Tongeren
Control banding (CB) is a useful approach to evaluate and control the risk of exposure to nanomaterials (NM) due to uncertainty surrounding their toxicity and challenges associated with their measurement. Four CB tools specifically developed for NMs (NanoSafer, Stoffenmanager-Nano, NanoTool, and the Precautionary matrix) have been evaluated for their changes to differences in hazard and exposure input data. The hazard and exposure classification were also compared with experimental data. The tools provided different hazard and emission/exposure outputs when compared with each other and with experimental data. For some of the tools the information required to estimate the hazard is not always available in the Safety Data Sheet and it requires expert judgement. The tools have the potential to be valuable starting points to assess areas of high priority, although outputs should be interpreted with care. Further work should be done to improve their estimates, especially the inclusion of modifiers that account for the effectiveness of the ventilation and the effect of high temperatures during the process.

12 June 2018 in Nanotoxicology
Verified
Journal Article
Open access
DHDanail Hristozov
Danail Hristozov
Lisa PizzolLisa Pizzol
Lisa Pizzol
GBGianpietro Basei
Gianpietro Basei
AZAlex Zabeo
Alex Zabeo
AMAiga Mackevica
Aiga Mackevica
Antonio MarcominiAntonio Marcomini
Antonio Marcomini
The use of nano-scale copper oxide (CuO) and basic copper carbonate (Cu2(OH)2CO3) in both ionic and micronized wood preservatives has raised concerns about the potential of these substances to cause adverse humans health effects. To address these concerns, we performed quantitative (probabilistic) human health risk assessment (HHRA) along the lifecycles of these formulations used in antibacterial and antifungal wood coatings and impregnations by means of the EU FP7 SUN project’s Decision Support System (SUNDS, www.sunds.gd). The results from the risk analysis revealed inhalation risks from CuO in exposure scenarios involving workers handling dry powders and performing sanding operations as well as potential ingestion risks for children exposed to nano Cu2(OH)2CO3 in a scenario involving hand-to-mouth transfer of the substance released from impregnated wood. There are, however, substantial uncertainties in these results, so some of the identified risks may stem from the safety margin of extrapolation to fill data gaps and might be resolved by additional testing. Our stochastic approach successfully communicated the contribution of different sources of uncertainty in the risk assessment. The main source of uncertainty was the extrapolation from short to long-term exposure, which was necessary due to the lack of (sub)chronic in vivo studies with CuO and Cu2(OH)2CO3. Considerable uncertainties also stemmed from the use of default inter- and intra-species extrapolation factors.

16 May 2024 in Nature Protocols
Verified
Journal Article
Closed access
PDF file
Nina JeliazkovaNina Jeliazkova
Nina Jeliazkova
ELEleonora Longhin
Eleonora Longhin
NYNaouale El Yamani
Naouale El Yamani
Elise Rundén-PranElise Rundén-Pran
Elise Rundén-Pran
EMElisa Moschini
Elisa Moschini
Maria DusinskaMaria Dusinska
Maria Dusinska