Ke Han

Ke Han

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
KHKe Han
Ke Han
Weihua LiuWeihua Liu
Weihua Liu
A high-efficiency concurrent dual-band GaN power amplifier (PA) is designed and fabricated based on the network parameter extraction (NPE) method, where the expanded optimum load impedance spaces of continuous modes are applied to construct the NPE criteria to facilitate harmonic tuning. A swallow-spit process is proposed to improve the effectiveness of NPE by dynamically changing the criteria. The prototype design process verified that the proposed algorithm is easy to be implemented, which avoids the cumbersome tunings and complex numerical derivations on the parameters of the dual-band output matching networks. Measurement results demonstrate that the fabricated GaN PA achieves saturated output powers of 40.5 dBm ± 0.4 dBm and 41 dBm ± 0.3 dBm over dual bands of 0.6-0.8 GHz and 1.6-1.9 GHz with peak PAEs of 71%-74% and 68%-73%, respectively.

23 November 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KHKe Han
Ke Han
ZCZeqiang Chen
Zeqiang Chen
Weihua LiuWeihua Liu
Weihua Liu
This article presents systematic research on the methodology for a wideband post-matching Doherty power amplifier (PM-DPA). First, closed-form derivations are presented to analyze the numerical solutions of the PM-DPA’s output matching network (OMN). In the presented derivations, the passive and reciprocal characteristics of the OMN are incorporated to ensure the physical feasibility of the OMN solutions, and the degree of freedom in choosing the power-combining load impedance ( $Z_{\mathrm{L.CO}})$ is preserved to attain the mathematical completeness of the OMN solutions. The theoretical derivations prove the flexibility of $Z_{\mathrm{L.CO}}$ in the PM-DPA for the first time. Then, the compensated semi-lumped (CSL)- $\lambda $ /4 transmission line (TL) with absorbed transistor parasitics is proposed to take full advantage of the flexibility of $Z_{\mathrm{L.CO}}$ in wideband PM-DPA implementation. The method of tuning $Z_{\mathrm{L.CO}}$ with the help of CSL- $\lambda $ /4 TL for enlarged PM-DPA bandwidth is presented. At last, prototype design of a wideband PM-DPA with optimized quasi-resistive $Z_{\mathrm{L.CO}}$ is presented to verify the effectiveness of the proposed methodology. Measurement results show that the fabricated PM-DPA achieves the state-of-the-art performances, such as the gains of 12–13 dB, the saturated output powers of 43.6–45 dBm, the drain efficiencies of 62%–71% for saturated operation, and drain the efficiencies of 49%–58% for 6-dB power-back-off (PBO) operation over 1.4–2.5 GHz.

1 February 2012 in Journal of Semiconductors
Verified
Journal Article
Closed access
YLYilei Li
Yilei Li
KHKe Han
Ke Han
NYNa Yan
Na Yan
XTXi Tan
Xi Tan
HMHao Min
Hao Min

3 August 2017 in Semiconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
KHKe Han
Ke Han
LZLin Zhu
Lin Zhu
In order to suppress the gate leakage current of a GaN high electron mobility transistor (GaN HEMT), a GaN metal-oxide-semiconductor high electron mobility transistor (MOSHEMT) is proposed, in which a metal-oxide-semiconductor gate with high-dielectric-constant HfO 2 as an insulating dielectric is employed to replace the traditional GaN HEMT Schottky gate. A 0.5 μ m gate length GaN MOSHEMT was fabricated based on the proposed structure, the Al 0.28 Ga 0.72 N barrier layer is partially etched to produce a higher transconductance without deteriorating the transport characteristics of the two-dimensional electron gas in the channel, the gate dielectric is HfO 2 deposited by atomic layer deposition. Current-voltage characteristics and radio frequency characteristics are obtained after device preparation, the maximum current density of the device is 900 mA mm −1 , the source-drain breakdown voltage is 75 V, gate current is significantly suppressed and the forward gate voltage swing range is about ten times higher than traditional GaN HEMTs, the GaN MOSHEMT also demonstrates radio frequency characteristics comparable to traditional GaN HEMTs with the same gate length.

13 August 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
ZCZeqiang Chen
Zeqiang Chen
QXQin Xia
Qin Xia
LDLi Dong
Li Dong
SFShiquan Fan
Shiquan Fan
KHKe Han
Ke Han
Weihua LiuWeihua Liu
Weihua Liu
Envelope tracking (ET) is an effective way to improve the efficiency of power amplifier (PA) for 5G communication systems. To understand the restriction of the hybrid supply modulator (HSM) for ultra-wide band ET applications, an extended power loss model and a Short Time Fourier Transform (STFT) methodology are put forward to be the fundamental guide of the control methodology. An average voltage alignment (AVA) algorithm is proposed, which aligns the current waveforms by using pre-cached envelope signals to reduce the power loss due to the mismatch. Furthermore, a digital low pass filter (LPF) is integrated in the AVA controller, aiming at eliminating the necessity of very high-speed switches in HSM, which reduces the difficulty of hardware facility. The prototype chip is fabricated with a standard 0.18 μm CMOS technology and fulfilled with the discrete components on the PCB to verify the methodology and the system. Measurement results show that the proposed method extends the tracking bandwidth up to 200-MHz, and achieves 20% efficiency increment with the maximum 20 MHz switching frequency decrement comparing to the normal hysteresis comparison logic. A GaAs PA is introduced to measure the system linearity, and the ACPR of ET PA reaches -32 dBc. The proposed strategy successfully push the HSM ET application to hundreds of MHz compared with the previous level of 10-MHz.

28 December 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KHKe Han
Ke Han
Weihua LiuWeihua Liu
Weihua Liu
Conventional continuous Class-F 3 (CF 3 ) power amplifiers (PAs) require designers to provide quasi-infinite third-harmonic load impedances to intrinsic transistors, which is not always feasible in practical design. The conduction-angle-manipulated (CAM) waveform was used in CF 3 PAs to remove the condition of infinite third-harmonic load impedance. But the efficiency is significantly degraded in CAM-CF 3 PA. In this article, a peak-clipped current (PCC) waveform is proposed for CF 3 PA with noninfinite third-harmonic load impedance and enhanced efficiency and gain linearity. The proposed PCC waveform can be intrinsically generated by an overdriven transistor without relying on complex hardware overheads. The advantages of the proposed PCC-CF 3 mode are analyzed by comparing it with the CAM-CF 3 mode, and the design methodology of PCC-CF 3 PA is provided. Finally, a prototype of PCC-CF 3 PA is implemented. The experimental results show that the output powers of 41.6–42 dBm, power-added efficiencies (PAEs) of 72%–74%, and gain compressions of below 2.6 dB are achieved over the frequency range from 1.6 to 1.8 GHz. The proposed PCC-CF 3 PA achieves high efficiency and excellent gain linearity, simultaneously.