Here, we demonstrated a direct method to produce cellulose nanocrystals (CNCs) with a rod-like shape from microcrystalline cellulose by a ZnCl2-based deep eutectic solvent (DES) with a high yield (~80.1%). We obtained CNCs, crystalline index (68.9%), with a width of ~30–50 nm and a length of 200–400 nm. Importantly, we were able to functionalize the CNCs with an acetyl, -(CO)CH3, group, which could potentially modulate the hydrophobic property of the CNCs. We attributed the formation of the CNCs to the Lewis acid effect of ZnCl2, which can hydrolyze the amorphous cellulose regime. Our study opens a new path to directly isolate cellulose nanocrystals with several functional groups on the surface of CNCs.
In this study, we report an effective, one-step chemical treatment to directly isolate carboxylated cellulose nanocrystals (CCNCs) from a lignocellulosic source using a mixture of peracetic acid and 10% H2SO4 solution. We used infrared spectroscopy, X-ray diffraction, dynamic light scattering, atomic force microscopy, and scanning electron microscopy to characterize all the materials. The obtained CCNCs exhibited needle-like shapes with a width of 10–50 nm and a length of 200–500 nm, a high crystalline index (71.3%), and a high content of -COOH groups (~1.405 mmol/g), with a zeta potential value of −48.5 mV. We attributed this to the cooperative effect of strong oxidative agent and strong acid, which makes the removal of all components occur simultaneously in parallel with the partial hydrolysis of amorphous cellulose regions. Our study opens a new, simple approach to directly isolate cellulose nanocrystals from a lignocellulosic source.