In this study, we report an effective, one-step chemical treatment to directly isolate carboxylated cellulose nanocrystals (CCNCs) from a lignocellulosic source using a mixture of peracetic acid and 10% H2SO4 solution. We used infrared spectroscopy, X-ray diffraction, dynamic light scattering, atomic force microscopy, and scanning electron microscopy to characterize all the materials. The obtained CCNCs exhibited needle-like shapes with a width of 10–50 nm and a length of 200–500 nm, a high crystalline index (71.3%), and a high content of -COOH groups (~1.405 mmol/g), with a zeta potential value of −48.5 mV. We attributed this to the cooperative effect of strong oxidative agent and strong acid, which makes the removal of all components occur simultaneously in parallel with the partial hydrolysis of amorphous cellulose regions. Our study opens a new, simple approach to directly isolate cellulose nanocrystals from a lignocellulosic source.
23 February 2024 in Vietnam Journal of Science and Technology
In this work, we present the synthesis and applications of Gd2O3@PVP nanoparticles as an efficient contrast agent for MRI and CT techniques. Gd2O3@PVP nanoparticles have been successfully synthesized by the polyol method using ethylene glycol and poly(vinylpyrrolidone) as solvent and surfactant, respectively. The structure, morphology and characteristic properties of the materials are thoroughly investigated by SEM, TEM, UV-Vis, XRD, FTIR and DLS measurements. As an important result, NPs synthesized under optimized conditions have a diameter in the range of 12 nm and exhibit a good contrast signal in magnetic resonance imaging and computed tomography at relatively low concentration ([NPs] = 0.1 mM for MRI and 1.25 mg.mL-1 for CT). In particular, the concentration of Gd2O3@PVP nanoparticles used in CT is 10 times lower than that of the commercial Iobitridol product (i.e., 12.5 mg.mL-1) to achieve similar signal intensity. This result has an important implication for reducing the dose of contrast agent introduced into the body. The obtained results suggest that PVP-coated Gd2O3 nanoparticles can be applied as multifunctional contrast agents for imaging diagnostic applications in the near future.
Objective: Benzoyl peroxide (BPO) is a widely used active ingredient in acne treatments, recognized for its antibacterial and exfoliating properties. This study aims to quantitatively determine the concentration of BPO in an acne cream using UV-Vis spectrophotometry. Methods: the method involves dissolving the cream in a suitable solvent and measuring its absorbance at a specific wavelength. The UV-Vis technique has demonstrated accuracy and reliability quantifying BPO in commercial formulations. This method is suitable for use in quality control and formulation standardization in the pharmaceutical and cosmetic industries. Results: the UV-Vis method was used to determine the concentration of BPO in the product. This quantitative analytical method was validated according to ICH guidelines at a wavelength of 235nm, range of determination is 4.8 µg/ml to 7.2 µg/ml. Conclusion: the proposed method for analyzing BPO content is simple, highly reliable and well-suited for use in laboratory settings.