Jan  Hünting

Jan Hünting

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
KAKarim Asami
Karim Asami
SRSebastian Roth
Sebastian Roth
JHJan Hünting
Jan Hünting
TRTim Röver
Tim Röver
CEClaus Emmelmann
Claus Emmelmann
Additive manufacturing (AM) technologies have witnessed remarkable advancements, offering opportunities to produce complex components across various industries. This paper explores the potential of AM for fabricating bipolar plates (BPPs) in fuel cell or electrolysis cell applications. BPPs play a critical role in the performance and efficiency of such cells, and conventional manufacturing methods often face limitations, particularly concerning the complexity and customization of geometries. The focus here lies in two specific AM methods: the laser powder bed fusion of metals (PBF-LB/M) and material extrusion of metals (MEX/M). PBF-LB/M, tailored for high-performance applications, enables the creation of highly complex geometries, albeit at increased costs. On the other hand, MEX/M excels in rapid prototyping, facilitating the swift production of diverse geometries for real-world testing. This approach can facilitate the evaluation of geometries suitable for mass production via sinter-based manufacturing processes. The geometric deviations of different BPPs were identified by evaluating 3D scans. The PBF-LB/M method is more suitable for small features, while the MEX/M method has lower deviations for geometrically less complex BPPs. Through this investigation, the limits of the capabilities of these AM methods became clear, knowledge that can potentially enhance the design and production of BPPs, revolutionizing the energy conversion and storage landscape and contributing to the design of additive manufacturing technologies.

1 November 2023 in Zeitschrift für wirtschaftlichen Fabrikbetrieb
Verified
Journal Article
Closed access
JHJan Hünting
Jan Hünting
JWJohannes Waldschmidt
Johannes Waldschmidt
JMJochen Michael
Jochen Michael
MSMarcel Dias da Silva
Marcel Dias da Silva
CEClaus Emmelmann
Claus Emmelmann
TRTim Röver
Tim Röver
Fehldrucke sowie die spanende Nachbearbeitung additiv gefertigter Metallbauteile verteuern und verlängern die Produktion. Ressourceneffiziente Stützkörper und optimierte Nachbearbeitungsprozesse wirken diesem Problem entgegen. Einen praktikablen Lösungsweg haben die Bundesförderprojekte „BEST“ und „OptiPro“ entwickelt: eine optimierte Prozesskette für den 3D-Druck von der Generierung der Stützstrukturen bis zum gedruckten Bauteil.

9 November 2026 in Research Square
Verified
Preprint
Open access
PDF file
JHJan Hünting
Jan Hünting
KEKathrin Marina Eckert
Kathrin Marina Eckert
JJJelle Jacobs
Jelle Jacobs
MMMaria Isabelle Maiwald
Maria Isabelle Maiwald
DHDirk Herzog
Dirk Herzog
IKIngomar Kelbassa
Ingomar Kelbassa
The increasing use of renewable raw materials with fluctuating properties creates a need for process equipment that can adapt to changing operating conditions. As components of smart reactors, self-adaptive structures could respond to reaction conditions such as temperature, pressure drop, or pH to maintain selectivity and yield within a desired range. Stimuli-responsive hydrogels are promising materials as they undergo reversible swelling and shrinkage when exposed to external stimuli, thereby enabling changes in reactor geometry and flow conditions. However, their low mechanical stability limits their use as structural reactor elements. This paper therefore proposes a multi-material additive manufacturing approach combining material extrusion of thermoplastics with a second extrusion system for hydrogel precursor. Hydrogel formulations with different water contents are investigated regarding printability and curing behavior, and response surface methodology is used to identify a robust processing parameter set. The selected formulation exhibits an average mass-based shrinkage of 54.22 ± 3.36% between 25 and 40 °C, while image-based measurements show that the majority of the volume change occurs within the first 5–10 min, with an apparent volumetric plateau reached after 16–18 min. Thermoresponsive actuation is further demonstrated using hydrogel-thermoplastic polyurethane bilayer specimens, with all specimens exhibiting a complete reversal in bending direction and curvature changes between 0.0343 and 0.0550 mm⁻¹. Based on these results, potential hydrogel-polymer design elements for smart reactors are proposed, including adaptive baffles, variable flow cross-sections, flow redirecters, and adaptive structured reactor internals.

8 October 2025 in Journal of Laser Applications
Verified
Journal Article
Closed access
JHJan Hünting
Jan Hünting
KAKarim Asami
Karim Asami
SLStella Lo
Stella Lo
IKIngomar Kelbassa
Ingomar Kelbassa
CEClaus Emmelmann
Claus Emmelmann
Multimaterial additive manufacturing enables the integration of different materials within a single component, allowing for tailored functionality and the reduction of process steps. Among available metal additive manufacturing (AM) techniques, material extrusion of metals (MEX/M) offers a cost-effective and feasible approach for the production of multimaterial parts using a commercial feedstock. This study focuses on the fabrication of green parts composed of pure copper (Cu) and Inconel 718 (IN718), selected for their highly complementary properties: Cu offers excellent thermal conductivity, while IN718 provides outstanding mechanical strength, as well as high corrosion and oxidation resistance. These characteristics make the Cu-IN718 combination particularly attractive for demanding aerospace applications, such as heat exchangers and combustion chambers. A design of experiments approach using response surface methodology was employed to evaluate the influence of key printing parameters, such as nozzle temperature, printing speed, extrusion multiplier, and layer thickness, on the density and dimensional accuracy of green part test specimens. Optimal process parameter sets for each individual material were identified and a corresponding parameter set for the multimaterial combination was subsequently derived. Different geometric features, various material topologies, and two interlocking geometries were analyzed to assess the print quality and geometric accuracy of multimaterial prints. The results were used to derive a set of design guidelines aimed at the manufacturability, reliability, and quality of Cu-IN718 green parts using MEX/M. These guidelines contribute to future standardization efforts in multimaterial extrusion, thus supporting more robust and reproducible production of components via metal AM.