Claus Emmelmann

Claus Emmelmann

Auto-generated profile, based on publicly available information

Claus Emmelmann

Institute of Laser and Systems Technology, Hamburg University of Technology 1 , Harburger Schloßstraße 28, Hamburg 21079, Germany

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
TRTim Röver
Tim Röver
MKMaxim Kuehne
Maxim Kuehne
FBFloyd Bischop
Floyd Bischop
LCLeighton Clague
Leighton Clague
BBBastian Bossen
Bastian Bossen
CEClaus Emmelmann
Claus Emmelmann
In aerospace, thermal applications demand compact, lightweight, and efficient heat exchangers. Additive manufacturing processes offer the potential to create highly complex structures that are not achievable through traditional manufacturing methods. This work presents the development of an additively manufactured fluid-fluid heat exchanger that shows the potential to enhance the performance, reduce weight, and increase compactness compared to a conventional plate heat exchanger. A numerical model of the conventional plate heat exchanger was created, and fluid dynamics simulations with heat transfer were performed. Validation of the simulations was done by experiments. Then, a novel heat exchanger was designed using a bottom-up approach and investigated at different levels of complexity using computational fluid dynamics. The internal structure of the final heat exchanger consists of a repeating triply periodic Schwarz diamond minimum surface elongated in the direction of flow. The heat exchanger was manufactured with laser powder bed fusion process using AlSi10Mg. It had a 108% higher compactness and 54% lower weight compared to the plate heat exchanger. Numerical analysis yielded the pressure loss in pascal was reduced by 50%–59% while heat transfer in watts was improved by 3%–5%. Future researches should experimentally investigate the thermal and fluid mechanical characteristics of the novel additively manufactured heat exchanger and increase compactness and heat transfer further by analyzing the minimum partition wall thickness and the impact of wall roughness and deposit formation.

13 October 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
KAKarim Asami
Karim Asami
SRSebastian Roth
Sebastian Roth
MKMichel Krukenberg
Michel Krukenberg
TRTim Röver
Tim Röver
DHDirk Herzog
Dirk Herzog
CEClaus Emmelmann
Claus Emmelmann
Lattice structures in additive manufacturing of 316L stainless steel have gained increasing attention due to their well-suited mechanical properties and lightweight characteristics. Infill structures such as honeycomb, lattice, and gyroid have shown promise in achieving desirable mechanical properties for various applications. However, the design process of these structures is complex and time-consuming. In this study, we propose a machine learning-based approach to optimize the design of honeycomb, lattice, and gyroid infill structures in 316L stainless steel fabricated using laser powder bed fusion (L-PBF) technology under different loading conditions. A dataset of simulated lattice structures with varying geometries, wall thickness, distance, and angle using a computational model that simulates the mechanical behavior of infill structures under different loading conditions was generated. The dataset was then used to train a machine learning model to predict the mechanical properties of infill structures based on their design parameters. Using the trained machine learning model, we then performed a design exploration to identify the optimal infill structure geometry for a given set of mechanical requirements and loading conditions. Finally, we fabricated the optimized infill structures using L-PBF technology and conducted a series of mechanical tests to validate their performance under different loading conditions. Overall, our study demonstrates the potential of machine learning-based approaches for efficient and effective designing of honeycomb, lattice, and gyroid infill structures in 316L stainless steel fabricated using L-PBF technology under different loading conditions. Furthermore, this approach can be used for dynamic loading studies of infill structures.

1 January 2018 in Procedia CIRP
Verified
Journal Article
Open access
OIO. Illies
O. Illies
GLG. Li
G. Li
JJJ.-P. Jürgens
J.-P. Jürgens
VPV. Ploshikhin
V. Ploshikhin
DHD. Herzog
D. Herzog
CEC. Emmelmann
C. Emmelmann

26 September 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
BBBastian Bossen
Bastian Bossen
MKMaxim Kuehne
Maxim Kuehne
OKOleg Kristanovski
Oleg Kristanovski
CEClaus Emmelmann
Claus Emmelmann
Powder bed fusion of metals using laser beam (PBF-LB/M) is a commonly used additive manufacturing process for the production of high-performance metal parts. AlSi10Mg is a widely used material in PBF-LB/M due to its excellent mechanical and thermal properties. However, the part quality of AlSi10Mg parts produced using PBF-LB/M can vary significantly depending on the process parameters. This study investigates the use of machine learning (ML) algorithms for the prediction of the resulting part density of AlSi10Mg parts produced using PBF-LB/M. An empirical data set of PBF-LB/M process parameters and resulting part densities is used to train ML models. Furthermore, a methodology is developed to allow density predictions based on simulated meltpool dimensions for different process parameters. This approach uses finite element simulations to calculate the meltpool dimensions, which are then used as input parameters for the ML models. The accuracy of this methodology is evaluated by comparing the predicted densities with experimental measurements. The results show that ML models can accurately predict the part density of AlSi10Mg parts produced using PBF-LB/M. Moreover, the methodology based on simulated meltpool dimensions can provide accurate predictions while significantly reducing the experimental effort needed in process development in PBF-LB/M. This study provides insights into the development of data-driven approaches for the optimization of PBF-LB/M process parameters and the prediction of part properties.

1 November 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
TRTim Röver
Tim Röver
MBMaximilian Bader
Maximilian Bader
KAKarim Asami
Karim Asami
CEClaus Emmelmann
Claus Emmelmann
IKIngomar Kelbassa
Ingomar Kelbassa
Improving mechanical topology optimization (TO) results by substituting biomimetic beams is one possibility to achieve designs of mechanical components that are highly sustainable and show good mechanical performance. Because of their geometric complexity, such designs were found to be well-suited for production by laser additive manufacturing. One obstacle of incorporating biomimetics beams in TO designs is the lack of detailed design methodologies. Röver et al. [“Methodology for integrating biomimetic beams in abstracted topology optimization results,” in Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 4: Biomedical and Biotechnology; Design, Systems, and Complexity Columbus, OH, 30 October–3 November (ASME, New York, 2022)] proposed a corresponding design concept. Building on their concept, we present in this work a detailed methodology for abstraction of TO results to a design consisting of ball nodes and cylindrical beams. Using such an auxiliary design, the internal forces and moments of the beams can be evaluated to allow for the substitution of suitable biomimetic beams to generate biomimetic component designs in a next step. We present a skeletonization algorithm based on the potential field approach. Using the skeletonization and an additional analysis of the dimensions of the beams in the TO result, the algorithm develops an auxiliary design of the original TO result. The final algorithm was applied to three common TO results to obtain one auxiliary component design each. The developed algorithm was found to generate abstractions that were well-suited for use in the methodology proposed in Röver et al. [“Methodology for integrating biomimetic beams in abstracted topology optimization results,” in Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 4: Biomedical and Biotechnology; Design, Systems, and Complexity Columbus, OH, 30 October–3 November (ASME, New York, 2022)], because internal forces and moments in the abstracted beams could be evaluated with less effort. Therefore, our work contributes to a detailed design methodology for biomimetic mechanical components in the field of design for additive manufacturing.

8 October 2025 in Journal of Laser Applications
Verified
Journal Article
Closed access
JHJan Hünting
Jan Hünting
KAKarim Asami
Karim Asami
SLStella Lo
Stella Lo
IKIngomar Kelbassa
Ingomar Kelbassa
CEClaus Emmelmann
Claus Emmelmann
Multimaterial additive manufacturing enables the integration of different materials within a single component, allowing for tailored functionality and the reduction of process steps. Among available metal additive manufacturing (AM) techniques, material extrusion of metals (MEX/M) offers a cost-effective and feasible approach for the production of multimaterial parts using a commercial feedstock. This study focuses on the fabrication of green parts composed of pure copper (Cu) and Inconel 718 (IN718), selected for their highly complementary properties: Cu offers excellent thermal conductivity, while IN718 provides outstanding mechanical strength, as well as high corrosion and oxidation resistance. These characteristics make the Cu-IN718 combination particularly attractive for demanding aerospace applications, such as heat exchangers and combustion chambers. A design of experiments approach using response surface methodology was employed to evaluate the influence of key printing parameters, such as nozzle temperature, printing speed, extrusion multiplier, and layer thickness, on the density and dimensional accuracy of green part test specimens. Optimal process parameter sets for each individual material were identified and a corresponding parameter set for the multimaterial combination was subsequently derived. Different geometric features, various material topologies, and two interlocking geometries were analyzed to assess the print quality and geometric accuracy of multimaterial prints. The results were used to derive a set of design guidelines aimed at the manufacturability, reliability, and quality of Cu-IN718 green parts using MEX/M. These guidelines contribute to future standardization efforts in multimaterial extrusion, thus supporting more robust and reproducible production of components via metal AM.