In this study, we show a direct correlation between the applied mechanical strain and an increase in monolayer MoS₂ photoresponsivity. This shows that tensile strain can improve the efficiency of monolayer MoS₂ photodetectors. The observed high photocurrent and extended response time in our devices are indicative that devices are predominantly governed by photogating mechanisms, which become more prominent with applied tensile strain. Furthermore, we have demonstrated that a nonencapsulated MoS₂ monolayer can be used in strain-based devices for many cycles and extensive periods of time, showing endurance under ambient conditions without loss of functionality. Such robustness emphasizes the potential of MoS₂ for further functionalization and utilization of different flexible sensors.

Defects in two-dimensional (2D) transition metal dichalcogenides (TMDs) greatly influence their electronic and optical properties by introducing localized in-gap states. Using different non-invasive techniques, we have investigated the spatial distribution of intrinsic defects in as-grown chemical vapor deposition (CVD) MoS₂ monolayers and correlated the results with the growth temperature of the sample. We have shown that by increasing the CVD growth temperature the concentration of defects decreases and their spatial distribution and type change, influencing the sample’s electronic and optical properties.

We present mcRS, a high-sensitivity free-space optics Raman system for in situ mechanochemical monitoring. It improves spectral and time resolution, costs five times less than commercial systems, and uniquely enables simultaneous rheology monitoring.

We report application of the knife-edge technique at the sharp edges of WS2 and MoS2 monolayer flakes for lateral and axial resolution assessment in all three modalities of nonlinear laser scanning microscopy: two-photon excited fluorescence (TPEF), second- and third-harmonic generation (SHG, THG) imaging. This technique provides a high signal-to-noise ratio, no photobleaching effect and shows good agreement with standard resolution measurement techniques. Furthermore, we assessed both the lateral resolution in TPEF imaging modality and the axial resolution in SHG and THG imaging modality directly via the full-width at half maximum parameter of the corresponding Gaussian distribution. We comprehensively analyzed the factors influencing the resolution, such as the numerical aperture, the excitation wavelength and the refractive index of the embedding medium for the different imaging modalities. Glycerin was identified as the optimal embedding medium for achieving resolutions closest to the theoretical limit. The proposed use of WS2 and MoS2 monolayer flakes emerged as promising tools for characterization of nonlinear imaging systems.