Results from detailed measurements of the magnetization $M$ of a commercial β-nickel phthalocyanine (β-NiPc) powder sample characterized by X-ray diffraction are reported from 2 K to 300 K and in magnetic fields $H$ up to 90 kOe. From the isothermal $M$ vs. $H$ data at several temperatures $T$, the diamagnetic nature of $\beta$-NiPc is established with temperature-independent susceptibility $\chi_{D} = -3.4 \times 10^{-7}$ emu/g·Oe, consistent with the spin S = 0 state for Ni $^{{2+}}$, in violation of violating Hunds rules. However, both the $M$ vs. $H$ and $M$ vs. $T$ data at the lower temperatures show a ferromagnetic component superposed on $\chi_{D}$ which is interpreted as resulting from a ferromagnetic impurity in the sample. X-ray photoelectron spectroscopy and X-ray microanalysis of the sample show the presence of Fe impurity with a concentration of 0.0434% (434 ppm) determined using inductively coupled plasma atomic emission spectroscopy (ICP-AES). It is argued that $\alpha$-FePc is the likely source of the ferromagnetic component. The procedures described here can be used to determine ppm-level magnetic impurities in other diamagnetic semiconductor materials.
Catalytic Methane Pyrolysis (CMP) is a chemical process that transforms Methane (CH4) into hydrogen and solid carbon without a CO2 byproduct [ 1-3]. The emphasis in sustainability and the reduction of greenhouse gases (GHG) emissions with respect to energy generation, has significantly increased the interest CMP, which has shown the potential to decrease the required operating temperature from > 1000 oC to ≤ 700 oC [ 4]. Recent fluidized bed tests utilizing a novel iron-alumina catalyst have demonstrated continuous hydrogen production with high conversion rates at 700 oC for both methane and ethane. Analysis of the carbon product formed in these tests showed the presence of single and multiwalled nanotubes, conglomerate nanofibers, and carbon fibers with the resultant material being a mix of allotropes. Electron Microscopy (EM), X-ray Microanalysis/Energy Dispersive Spectroscopy (XRM/EDS), and X-ray Photoelectron Spectroscopy (XPS) was initiated on a series of CMP carbon samples from this testing in order to further elucidate the types, abundance, and relative yield of these carbon products. The series of analyses were carried out utilizing a JEOL-7600 FESEM equipped with a Thermo-Electron Pathfinder XRM/EDS and a Gatan Mono-CL4, a Thermo-Scientific Apreao-2C FESEM equipped with a Thermo-Electron Pathfinder XRM/EDS, a Physical Electronics 590 Scanning Auger Electron Microscope, and a Physical Electronic 5600ci X-ray Photoelectron Spectroscopy system.
Catalytic pyrolysis of natural gas (NGCP), a chemical process that transforms natural gas (NG) (CH4) into hydrogen and solid carbon without a CO2 byproduct [ 1-3], has been proposed as a near term solution for the production of hydrogen, while proposed greener hydrogen production technologies are demonstrated and, upon being verified, allowed to mature. For NGCP to be successfully implemented, the generated carbon products need to be value added and aligned with target markets able to handle the influx that will be generated in conjunction with hydrogen. Alignment of the carbon products within certain markets entails tailoring the properties and allotropes selectivity to maximize the value-added nature of the material. A first step in tailoring to markets involves leveraging analytical techniques and creating methods to characterize the carbon products. [ 4].