Loess, a typical soil widely distributed in China, exhibits engineering properties that are highly sensitive to environmental changes, leading to increased erosion and the development of surface cracks. This article examines the influence of initial moisture content, dry density, and thickness on crack formation in compacted loess subjected to wet–dry cycles, using both laboratory experiments and numerical simulation analysis. It quantitatively analyzes the process of crack evolution using digital image processing technology. The experimental results indicate that wet–dry cycles can cause cumulative damage to the soil, significantly encouraging the initiation and expansion of secondary cracks. New cracks often branch out and extend along the existing crack network, demonstrating that the initial crack morphology has a controlling effect over the final crack distribution pattern. Numerical simulations based on MultiFracS software further revealed that soil samples with a thickness of 0.5 cm exhibited more pronounced surface cracking characteristics than those with a thickness of 2 cm, with thinner layers of soil tending to form a more complex network of cracks. The simulation results align closely with the indoor test data, confirming the reliability of the established model in predicting fracture dynamics. The study provides theoretical underpinnings and practical guidance for evaluating the stability of engineering slopes and for managing and mitigating fissure hazards in loess.

Saturated sand foundations are susceptible to liquefaction under dynamic loads. This can result in roadbed subsidence, flotation of underground structures, and other engineering failures. Compared with the traditional foundation reinforcement technology, enzyme-induced calcium carbonate precipitation technology (EICP) is a green environmental protection reinforcement technology. The EICP technology can use enzymes to induce calcium carbonate to cement soil particles and fill soil pores, thus effectively improving soil strength and inhibiting sand liquefaction damage. The study takes EICP-solidified standard sand as the research object and, through the dynamic triaxial test, analyzes the influence of different confining pressure (σ₃) cementation times (CT), cyclic stress ratio (CSR), dry density (ρ_d), and vibration frequency (f) on dynamic strength characteristics. Then, a modified dynamic strength model of EICP-solidified standard sand was established. The results show that, under the same confining pressure, the required vibration number for failure decreases with the increase in dynamic strength, and the dynamic strength increases with the rise in dry density. At the same number of cyclic vibrations, the greater the confining pressure and cementation times, the greater the dynamic strength. When the cementation times are constant, the dynamic strength of EICP-solidified sand decreases with the increase in the vibration number. When cementation times are 6, the dynamic strength of the specimens with CSR of 0.35 is 25.9% and 32.4% higher than those with CSR of 0.25 and 0.30, respectively. The predicted results show that the model can predict the measured values well, which fully verifies the applicability of the model. The research results can provide a reference for liquefaction prevention in sand foundations.

Water migration occurs in unsaturated loess subgrade due to extreme rainfall, making it prone to subgrade subsidence and other water damage disasters, which seriously impact road safety and sustainable development of the Loess Plateau. The study performed a rainfall test using a compacted loess subgrade model based on a self-developed water migration test device. The effects of extreme rainfall on the water distribution, wetting front, and infiltration rate in the subgrade were systematically explored by setting three rainfall intensities (4.6478 mm/h, 9.2951 mm/h, and 13.9427 mm/h, namely J1 stage, J2stage, and J3 stage), and a lateral water migration model was proposed. The results indicated that the range of water content change areas constantly expands as rainfall intensity and time increase. The soil infiltration rate gradually decreased, and the ratio of surface runoff to infiltration rainfall increased. The hysteresis of lateral water migration refers to the physical phenomenon in which the internal water response of the subgrade is delayed in time and space compared to changes in boundary conditions. The sensor closest to the side of the slope changed first, with the most significant fluctuations. The farther away from the slope, the slower the response and the smaller the fluctuation. The bigger the rainfall intensity, the faster the wetting front moved horizontally. The migration rate at the slope toe is the highest. The migration rate of sensor W3 increased by 66.47% and 333.70%, respectively, in the J3 stage compared to the J2 and J1 stages. The results of the model and the measured data were in good agreement, with the R² exceeding 0.90, which verifies the reliability of the model. The study findings are important for guiding the prevention and control of disasters caused by water damage to roadbeds in loess areas.

The collapsibility of loess in the northwest region poses a significant threat to infrastructure stability. Current research predominantly separates macroscopic mechanical behaviour from mesoscopic structural characteristics, lacking a systematic methodology to quantify their interdependence. This study integrates consolidation tests, laser particle size analysis, mercury intrusion porosimetry (MIP) tests, and fractal theory to propose a multi-scale evaluation framework for assessing the structural potential of collapsible loess in strength, with on-site verification conducted. This framework quantitatively links grain size, pore potential, and connection potential to the collapsibility of loess. The experimental results indicate that loess’s high compressibility and collapsibility are primarily governed by grain size and pore potential. In contrast, the connection potential of soluble salts mitigates structural instability through ionic bonding. Field verification demonstrates a strong correlation between the three structural potentials and the subsidence coefficient (R² = 0.92, p < 0.01), validating the framework’s effectiveness in evaluating structural stability. A ternary evaluation system has been established based on fractal dimension, void ratio, and soluble salt content. These research findings provide predictive tools for managing collapse risks in loess-related projects, enabling fixed-point design of loess foundations and early warning of collapse risks.

Aeolian sand is susceptible to wind and water erosion, which seriously restricts the ecological restoration and sustainable development in desert areas. Traditional solidification methods have characteristics of high cost, easy pollution, and unstable solidification. Enzyme-induced calcium carbonate precipitation (EICP) is an emerging method that has advantages in terms of cost-effectiveness, environmental friendliness, and durability, and, especially when coupled with fiber reinforcement (FR), it can significantly prevent brittle fracture. In this paper, ultraviolet (UV) erosion and freeze–thaw (FT) erosion tests were conducted to investigate the anti-erosion capacity of aeolian sand solidified by EICP and basalt fiber reinforcement (BFR) or wool fiber reinforcement (WFR). According to the analysis of the variation laws of sample appearance, quality losses, and unconfined compressive strength (UCS) during the UV and FT erosion process, the erosion mechanism was revealed, and the UCS models considering the damage effects were established. The research results indicated that the UCS of aeolian sand solidified by MICP and FR was significantly improved under UV and FT erosion. The strength loss rates of aeolian sand solidified by EICP, EICP–BFR, and EICP–WFR reached 45.4%, 46.6%, and 51.6%, respectively, under 90 h UV erosion. When the FT cycles reached 8, the strength loss rate of aeolian sand solidified by EICP, EICP–BFR, and EICP–WFR attained 41.0%, 49.2%, and 55.8%, respectively. The determination coefficients of the UCS models were all greater than 0.876, indicating that the experimental results were in good agreement with the predicted results, verifying the reliability of the established models. The research results can offer reference values for windproof and sand fixation in desert areas.

Under traffic load, earthquake load, and wave load, saturated sand foundation is prone to liquefaction, and foundation reinforcement is the key measure to improve its stability and liquefaction resistance. Traditional foundation treatment methods have many problems, such as high cost, long construction period, and environmental pollution. As a new solidification method, enzyme-induced calcium carbonate precipitation (EICP) technology has the advantages of economy, environmental protection, and durability. Through a triaxial consolidated undrained shear test under cyclic loading, the impacts of confining pressure (σ₃), cementation number (P_c), cyclic stress ratio (CSR), initial dry density (ρ_d), and vibration frequency (f) on the development law of pore water pressure of EICP-solidified sand are analyzed and then a pore water pressure model suitable for EICP-solidified sand is established. The result shows that as σ₃ and CSR increase, the rise rate of pore water pressure of solidified sand gradually accelerates, and with a lower vibration number required for liquefaction, the anti-liquefaction ability of solidified sand gradually weakens. However, as P_c, ρ_d, and f rise, the increase rate of pore water pressure of solidified sand gradually lowers, the vibration number required for liquefaction increases correspondingly, and its liquefaction resistance gradually increases. The test results are highly consistent with the predictive results, which show that the three-parameter unified pore water pressure model is suitable for describing the development law of A-type and B-type pore water pressure of EICP-solidified sand at the same time. The study results provide essential reference value and scientific significance in guidance for preventing sand foundations from liquefying.