Many pharmaceuticals have been recently identified at trace levels worldwide in the aquatic environment. Among them, the highly consumed paracetamol (PCM), an analgesic and antipyretic drug, is largely being accumulated in the aquatic environment due to inefficient removal by conventional sewage treatment plants. This work deals with the treatment of PCM, used as a model pharmaceutical contaminant of emerging concern, by catalytic wet peroxide oxidation using clay-based materials as catalysts. The catalysts were prepared from natural clays, extracted from four different deposits using acid-activated treatment, calcination, and pillarization with Fe and Co. Pillared clays show the highest catalytic activity owing to the presence of metals, allowing to remove completely the PCM after 6 h under the following operating conditions: C_PCM = 100 mg L⁻¹, C_H2O ₂ = 472 mg L⁻¹, C_cat = 2.5 g L⁻¹, initial pH = 3.5 and T = 80 °C. The prepared materials presented high stability since leached iron was measured at the end of reaction and found to be lower than 0.1 mg L⁻¹.

Due to water scarcity and ready availability, treated wastewater in Central Asia is increasingly reused and seen as a valuable resource, requiring effective management with particular care for human health, environmental protection, and water security. Due to limited technical and economic support and poorly developed regulatory systems, many cities have inadequate wastewater treatment infrastructure. Improved wastewater effluent management is paramount due to its relationship with surface and groundwater quality used for drinking and agricultural irrigation. This paper presents a brief review of the published literature reporting on current wastewater treatment technologies and effluent composition, with particular attention paid to reuse needs. The impact of these practices on water quality is further assessed from information and reports gathered from various sources on the quantity and quality of surface waters and groundwaters. Finally, alternatives to current wastewater treatment practices in Central Asia will be explored with a particular emphasis on the removal of contaminants of emerging concern, including biological treatment systems, adsorption, advanced oxidation processes, and managed/unmanaged aquifer recharge techniques based on permeable reactive barriers, aiming to increase the availability and quality of surface waters and groundwaters for safe water reuse.

This review aims to increase attention on present water quality issues on Central Asia, finding gaps in the literature on ways to address treatment needs, and help ensure future use of Central Asia surface waters and groundwater for all beneficial uses. Central Asia is a landlocked region known for its harsh climatic conditions and scarce water resources, despite being home to some of the world’s largest internal drainage basins. The available literature suggests that increasing salinity has rendered water unsuitable for irrigation and consumption; hazardous trace elements are found throughout Central Asia, most often associated with mining and industrial sources; and that legacy pesticides influence water quality, particularly in agriculturally influenced basins. This study also focuses on the effects of municipal and industrial wastewater discharge. Additionally, the impact of inadequately treated wastewater on water resources is analyzed through a review of available data and reports regarding surface and groundwater quantity and quality. Given the challenges of water scarcity and accessibility, the reuse of treated wastewater is becoming increasingly important, offering a valuable alternative that necessitates careful oversight to ensure public health, environmental sustainability, and water security. However, due to insufficient financial and technical resources, along with underdeveloped regulatory frameworks, many urban areas lack adequate wastewater treatment facilities, significantly constraining their safe and sustainable reuse. Proper management of wastewater effluent is critical, as it directly influences the quality of both surface and groundwater, which serve as key sources for drinking water and irrigation. Due to their persistent and biologically active nature even at trace levels, we discuss contaminants of emerging concern such as antibiotics, pharmaceuticals, and modern agrochemicals. This review thus highlights gaps in the literature reporting on impacts of wastewater inputs to water quality in Central Asia. It is recommended that future research and efforts should focus on exploring sustainable solutions for water quality management and pollution control to assure environmental sustainability and public health.

Superhydrophobic magnetic nanomaterials (SHMNMs) are emerging as multifunctional platforms for efficient oil–water separation due to their combination of extreme water repellency, strong oil affinity, and external magnetic responsiveness. This review presents a comprehensive analysis of recent advances in the design, synthesis, and environmental application of SHMNMs. The theoretical foundations of superhydrophobicity and the physicochemical behavior of magnetic nanoparticles are first outlined, followed by discussion of their synergistic integration. Key fabrication techniques—such as sol–gel synthesis, electrospinning, dip-coating, laser-assisted processing, and the use of biomass-derived precursors—are critically assessed in terms of their ability to tailor surface morphology, chemical functionality, and long-term durability. The review further explores the mechanisms of oil adsorption, magnetic separation, and material reusability under realistic environmental conditions. Special attention is paid to the scalability, mechanical resilience, and environmental compatibility of SHMNMs in the context of water treatment technologies. Current limitations, including reduced efficiency in harsh media, potential environmental risks, and challenges in material regeneration, are discussed. This work provides a structured overview that could support the rational development of next-generation superhydrophobic materials tailored for sustainable and high-performance separation of oil and organic pollutants from water.

Global water pollution driven by industrial and agricultural expansion has resulted in the widespread occurrence of persistent contaminants, particularly pharmaceuticals and heavy metals, in groundwater systems. Conventional treatment methods often prove inefficient, costly, and environmentally unsustainable, highlighting the need for innovative in situ remediation technologies. Permeable Reactive Barriers (PRBs) have emerged as a promising and energy-efficient solution for the long-term purification of contaminated aquifers. Their efficiency arises from passive operation, relying on natural groundwater flow to promote pollutant removal through adsorption, ion exchange, precipitation, and redox-driven transformations. This review emphasizes the superior performance of materials such as Activated Carbon, Biochar, Zeolites, and Zero-Valent Iron (ZVI) in the immobilization and reduction in pharmaceuticals and metal ions. Key challenges to PRB longevity include permeability loss and reactive media depletion due to mineral precipitation and biofouling. Advances in hybrid PRB configurations, coupled with electrokinetic (EK) and bioreactor systems, and predictive modeling, particularly Artificial Neural Networks (ANNs), offer pathways to enhance performance, optimize design, and ensure sustainable operation. Overall, PRBs represent a scalable and environmentally sound approach to groundwater remediation, with future progress relying on the development of multifunctional, regenerable materials and integrated design strategies.