Min Li

Prof. Dr. Min Li

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JWJiaju Wang
Jiaju Wang
KLKunfeng Liang
Kunfeng Liang
THTao He
Tao He
HHHaijiang He
Haijiang He
DZDayuan Zheng
Dayuan Zheng
LJLihua Jiang
Lihua Jiang
In order to improve the aerodynamic performance of the voluteless centrifugal fan, a multi-objective optimization design system was established by combining parametric modeling, experimental design, surrogate models, and optimization algorithms, with the static pressure and static pressure efficiency of the fan as the optimization objectives. The design parameters of the blade profile were obtained by fitting the blade profile with a Bézier curve. A mapping relationship between design parameters and optimization objectives was established by combining numerical simulation with a radial basis function neural network, and a genetic algorithm was used to optimize the blade profile. The results indicated a highly significant correlation between design parameters and optimization objectives, with a prediction error of no more than 1% for the surrogate model. The determination coefficients for static pressure and static pressure efficiency were 0.98 and 0.96, respectively. After optimization, the static pressure of the fan increased by 12.7 Pa at the design operating point, and the static pressure efficiency increased by 3.2%. The separation vortex decreased near the trailing edge of the blade suction surface, and the airflow impact at the leading edge of the blade decreased. The entropy production in the flow channel decreased, and the overall flow state of the fluid was improved.

2 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LZLongfei Zhou
Longfei Zhou
KLKunfeng Liang
Kunfeng Liang
DZDayuan Zheng
Dayuan Zheng
CWChao Wang
Chao Wang
MLMin Li
Min Li
LZLiangyu Zheng
Liangyu Zheng
This paper uses modal analysis and harmonic response analysis to study the vibration characteristics and vibration response of the frame of a volute-less centrifugal fan. The accuracy of the finite element model is verified by comparing the experimental results with the numerical simulation results. Our focus is on the resonance behavior of the fan frame under the maximum operating conditions. Therefore, the structural parameters are taken as design variables, and the maximum axial amplitude at 2600 rpm and its corresponding axial modal frequencies are taken as target parameters for research. A combination of response surface methodology and multi-objective optimization is used to optimize the structure parameters and solve for the Pareto solution set. Three feasible solutions were selected to verify the method’s accuracy. The results show that the optimized fan frame structure enhances the axial modal frequencies to 52.3 Hz, reflecting a 24% improvement over the baseline. Furthermore, we reduce the maximum vibration velocity at resonance to 2.15 mm/s, effectively minimizing vibration responses and preventing excitation and resonance issues at peak speeds.

Verified
Journal Article
Open access
PDF file
MLMin Li
Min Li
刘杨刘洋 杨
刘洋 杨
KLKunfeng Liang
Kunfeng Liang
JLJinglong Liu
Jinglong Liu
HHHaijiang He
Haijiang He
XYXinxue Ye
Xinxue Ye
This paper proposes a multi-objective optimization method based on response surface methodology and genetic algorithm to address the electromagnetic noise issue in external rotor permanent magnet synchronous motors. Theoretical analysis and 2D finite element simulation of electromagnetic force were conducted to identify the main orders of electromagnetic force; subsequently, through motor load and no-load tests, it was determined that the 6th-order radial electromagnetic force is the primary source of electromagnetic noise. Taking the 6th-order radial electromagnetic force, average torque, and torque ripple as optimization objectives, three key structural parameters were selected from eight optimization variables to construct a response surface model. The structural parameter optimization scheme for the motor was then obtained using a genetic algorithm. Finally, the optimization scheme obtained by the response surface method was validated under motor load conditions using two-dimensional finite element simulation; simulation results indicate that, compared to the original design, the optimized motor, exhibits a reduction in torque ripple by 65%, with the harmonic content of the radial air-gap flux density at the 1st, 3rd, 5th, and 7th orders decreasing by 8.7%, 6.4%, 12.5%, and 10.7%, respectively, and the 6th-order radial electromagnetic force reduced by 16.4%. Based on experimental identification of the dominant noise source, this reduction is expected to effectively suppress electromagnetic noise, which will be validated on a prototype in future work.

19 October 2026 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
CGChunyan Gao
Chunyan Gao
HCHaoyuan Chen
Haoyuan Chen
KLKunfeng Liang
Kunfeng Liang
DZDengyu Zhu
Dengyu Zhu
MLMin Li
Min Li
JLJunbo Li
Junbo Li
Permanent magnet synchronous motors (PMSMs) are increasingly used in electric vehicles, where rising power density and compact packaging impose greater demands on motor thermal management. However, cooling-channel design involves a coupled trade-off between heat removal and hydraulic resistance, while temperature-dependent electromagnetic losses are often not fully considered in optimization studies. To address this issue, this study investigates the multi-objective optimization and verification of a helical cooling channel for a liquid-cooled PMSM based on bidirectional magneto-thermal coupling. A three-dimensional transient electromagnetic model was coupled with a conjugate heat-transfer model to account for the feedback between winding temperature, copper resistivity, electromagnetic loss, and motor temperature. An experimental temperature-rise test bench was established for model validation, and an optimal Latin hypercube design, Universal Kriging surrogate models, and the non-dominated sorting genetic algorithm II (NSGA-II) were integrated in Isight (v2022, Dassault Systèmes, Vélizy-Villacoublay, France) to optimize the channel height, width, and fillet radius with the maximum motor temperature and coolant pressure drop as the objectives. Results show that the numerical model reproduced the measured thermal-hydraulic responses over the investigated coolant-flow-rate range, with maximum deviations of 1.16% for the end-winding temperature and 5.54% for the coolant pressure drop. Under the investigated peak-power condition, the total electromagnetic loss was 3864 W, of which the stator winding and stator core accounted for 66.2% and 30.5%, respectively, confirming that they are the dominant heat sources. The Universal Kriging model achieved training coefficients of determination of 0.97 and 0.98, with corresponding 10-fold cross-validated values of 0.953 and 0.968, for the maximum motor temperature and coolant pressure drop, respectively, and was therefore selected for NSGA-II optimization. For the selected compromise solution, the independently calculated pressure drop decreased from 12,312.97 to 8318.54 Pa, corresponding to a reduction of 32.45%, while the maximum motor temperature decreased from approximately 375.18 to 371.80 K, or by 3.38 K. The deviations between the surrogate predictions and independent computational fluid dynamics (CFD) results were 1.47% for pressure drop and 0.20% for maximum temperature. The proposed framework provides a physically consistent and experimentally supported method for the thermal-hydraulic design of PMSM cooling channels and offers a basis for further optimization of high-power-density motor thermal management systems.

Verified
Journal Article
Open access
PDF file
CGChunyan Gao
Chunyan Gao
YHYimeng Han
Yimeng Han
KLKunfeng Liang
Kunfeng Liang
MLMin Li
Min Li
SSShiman Su
Shiman Su
YZYun Zhu
Yun Zhu
Traditional optimization methods for interior permanent magnet synchronous motors (IPMSMs) often treat the stator and rotor as independent design domains, which limits the potential for suppressing torque fluctuations due to the neglected electromagnetic coupling between these components. This paper proposes a synergistic optimization strategy for a 120 kW IPMSM, aiming to overcome the inherent limitations of conventional unilateral optimization in design space exploration and achieve global performance enhancement through cross-domain collaboration. By establishing a unified surrogate model incorporating both stator slot geometries and rotor pole topologies, the collaborative effect of seven high-sensitivity design variables is systematically analyzed. The NSGA-II algorithm, coupled with a Kriging surrogate model, is employed to navigate the complex trade-offs among average torque, torque ripple, and cogging torque. Results demonstrate that the synergistic approach achieves a 28.1% reduction in torque ripple while maintaining high average torque, demonstrating superior improvement over conventional stator-only or rotor-only optimization schemes. Analysis based on Maxwell stress tensors and air-gap permeance functions reveals that the proposed method achieves simultaneous suppression of cogging torque and torque ripple by effectively harmonizing the 24th and 48th spatial harmonics. This study provides an efficient synergistic design methodology for the comprehensive performance enhancement of traction motors, offering practical reference value for the engineering development of high-performance electric vehicles.