In order to improve the aerodynamic performance of the voluteless centrifugal fan, a multi-objective optimization design system was established by combining parametric modeling, experimental design, surrogate models, and optimization algorithms, with the static pressure and static pressure efficiency of the fan as the optimization objectives. The design parameters of the blade profile were obtained by fitting the blade profile with a Bézier curve. A mapping relationship between design parameters and optimization objectives was established by combining numerical simulation with a radial basis function neural network, and a genetic algorithm was used to optimize the blade profile. The results indicated a highly significant correlation between design parameters and optimization objectives, with a prediction error of no more than 1% for the surrogate model. The determination coefficients for static pressure and static pressure efficiency were 0.98 and 0.96, respectively. After optimization, the static pressure of the fan increased by 12.7 Pa at the design operating point, and the static pressure efficiency increased by 3.2%. The separation vortex decreased near the trailing edge of the blade suction surface, and the airflow impact at the leading edge of the blade decreased. The entropy production in the flow channel decreased, and the overall flow state of the fluid was improved.
This paper uses modal analysis and harmonic response analysis to study the vibration characteristics and vibration response of the frame of a volute-less centrifugal fan. The accuracy of the finite element model is verified by comparing the experimental results with the numerical simulation results. Our focus is on the resonance behavior of the fan frame under the maximum operating conditions. Therefore, the structural parameters are taken as design variables, and the maximum axial amplitude at 2600 rpm and its corresponding axial modal frequencies are taken as target parameters for research. A combination of response surface methodology and multi-objective optimization is used to optimize the structure parameters and solve for the Pareto solution set. Three feasible solutions were selected to verify the method’s accuracy. The results show that the optimized fan frame structure enhances the axial modal frequencies to 52.3 Hz, reflecting a 24% improvement over the baseline. Furthermore, we reduce the maximum vibration velocity at resonance to 2.15 mm/s, effectively minimizing vibration responses and preventing excitation and resonance issues at peak speeds.