During the operational ventilation process of high-altitude helical tunnels, the installation method of jet fans is a key factor in determining the ventilation efficiency of the tunnel. In this study, the CFD numerical simulation method is adopted to establish three-dimensional ventilation models of helical tunnels with different curvature radii. Through orthogonal experiments, the effects of tunnel curvature radius on the characteristics of the air jet flow field, under the coupled influences of factors such as lateral spacing of jet fans, vertical height of fans, longitudinal spacing, and lateral offset, are investigated. The results show that when R = 500 m, 600 m, 700 m, and 800 m, the longitudinal spacing has the most significant impact on ventilation efficiency, followed by vertical height, with lateral offset and fan spacing having the least impact. The optimal spacing and vertical height of the fan groups remain consistent under different curvature radii, at 1.25D (fan diameter) and 15 cm, respectively. The optimal longitudinal spacing of the fan groups is 90 m, 90 m, 135 m, and 90 m, respectively. Shifting the fan groups 0.25 to 0.75 m towards the inner side of the tunnel helix (for R < 700 m) can optimize the flow field distribution within the tunnel. Finally, expressions for the relationship between the helical radius and the lateral offset and longitudinal spacing of the fan groups are established for the optimal installation parameters of fan spatial positions under different helical tunnel radii.

In tunnel operation ventilation systems, the arrangement of jet fans plays a decisive role in ensuring ventilation efficiency. Curved tunnels, due to their unique radius of curvature, exhibit significant differences in fan installation parameters and jet flow field distribution compared to traditional straight-line tunnels. In order to investigate the distinct characteristics, this research utilized computational fluid dynamics (CFD) simulation methods to analyze the ventilation performance of both an innovative, adjustable jet fan system and conventional jet fans within the context of curved tunnel configurations. The findings reveal that by adjusting the horizontal deflection angle of the novel jet fan, the flow field distribution can be effectively optimized, and the jet effect can be enhanced, thereby improving ventilation efficiency. Compared to traditional jet fans, the novel fan demonstrates a significantly greater capability in flow field optimization, especially when its horizontal deflection angle is adjusted, showing a trend where the jet effect initially increases and then decreases, with the longitudinal impact range being adjustable within a range of 5 m to 25 m.

To enhance the economic and safety aspects of tunnel structural design, this study optimizes the mix proportion of steel fiber-reinforced concrete (SFRC). It investigates the stress characteristics and support parameters of SFRC secondary lining structures via small-scale model tests and finite element analysis. The research focuses on the cracking process, deformation, and stress characteristics of SFRC linings under various loads. Compared with conventional reinforced concrete tunnels, SFRC tunnels show a significant increase in lining stiffness and load capacity, with a 20% reduction in reinforcement yielding load. When the damage factor is 0.43, the addition of steel fibers increases compressive stress by 22.18%. Using ABAQUS, simulations of SFRC linings with thicknesses ranging from 400 mm to 600 mm and reinforcement ratios of 0% to 0.28% were conducted. The results indicate that a 450 mm thick SFRC lining matches the mechanical performance of a 600 mm thick conventional reinforced concrete lining. Notably, an SFRC lining with a 0.20% circumferential reinforcement ratio equals a conventional lining with a 0.28% reinforcement ratio in overall mechanical performance.

With the accelerated development of urban underground spaces, prefabricated tunnel linings have become a research focus due to their advantages in construction efficiency and cost effectiveness. However, issues such as stress concentration at joints and insufficient overall stability hinder their broader application. This study investigates a cut-and-cover prefabricated tunnel project in the Chongqing High-Tech Zone through scale model tests and numerical simulations to systematically compare the mechanical behaviors of cast-in situ linings and three-segment prefabricated linings under surrounding rock loads. The experimental results show that the ultimate bearing capacity of the prefabricated lining is 15.3% lower than that of the cast-in situ lining, with asymmetric failure modes and cracks concentrated near joint regions. Numerical simulations further reveal the influence of joint stiffness on structural performance: when the joint stiffness is 30 MN·m/rad, the bending moment of the segmented lining decreases by 37.7% compared to the cast-in situ lining, while displacement increments remain controllable. By optimising joint pre-tightening forces and stiffness parameters, prefabricated linings can achieve stability comparable to cast-in situ structures while retaining construction efficiency. This research provides theoretical and technical references for the design and construction of open-cut prefabricated tunnel linings.

In response to the issue of local damage to mountainous bridges easily caused by rockfall impacts, carbon fiber cloth and steel plate strengthening methods were adopted to deeply study the impact of the width of carbon fiber cloth and steel plates on the strengthening effect. This study investigates the strengthening effectiveness of Carbon Fiber-Reinforced Polymer (CFRP) wraps and steel jackets on circular bridge piers, utilizing the ABAQUS finite element method. The analysis focuses on the effects of varying load conditions and confinement widths ranging from 100 to 200 cm, with a specific case study of a bridge pier in Nanchuan District, Chongqing. The research results show that the width of carbon fiber cloth and steel plates has a significant impact on the bridge pier’s impact resistance and damage resistance. There exists an optimal strengthening width that maximizes the strengthening effect. The stress distribution and displacement changes under different load conditions are affected by the width of the steel plate; the wider the steel plate, the better the strengthening effect, but the effect is not strictly linear. A comprehensive analysis method integrating multi-directional stress and displacement data was developed, incorporating weighting factors based on structural safety relevance. For both strengthening methods, a set of fitted formulas for widths between 100 cm and 200 cm was derived. This study provides systematic insights and practical guidance for the design of impact-resistant strengthening systems for bridge piers.

To investigate the structural dynamic response of pile-column bridge piers in mountainous regions under rockfall impact, this study takes the No. 4 double-column pier of Changba Bridge in Nanchuan, Chongqing, as a prototype. Based on similarity theory and differential equation analysis, a scaled model test was designed and conducted. By considering different rockfall impact angles (30°, 45°, 60°) and different impact positions on the pier (top, middle, bottom), the strain response characteristics of the pier concrete and reinforcing steel were systematically analyzed. The results indicate that the peak strain at the impacted location increases significantly with the increase in the rockfall impact angle; when the impact angle increases from 30° to 60°, the peak strain increases by approximately 22.8%. The peak strain decreases as the impact position approaches the bottom of the pier, with the most pronounced strain response observed at the middle position. The strain response of the reinforcing steel follows the same pattern as that of the concrete, albeit with a brief delay. Furthermore, the stirrups exhibit predominantly transverse orthogonal strain, while the longitudinal reinforcing bars exhibit predominantly longitudinal orthogonal strain. It is concluded that the impact angle is a key parameter affecting local damage to the pier, and the middle section of the pier should be regarded as a priority protection zone. This study provides a theoretical basis for the design of bridge piers in mountainous regions against rockfall impact.