Mo Yang

Mr. Mo Yang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 May 2020 in Macromolecular Materials and Engineering
Verified
Journal Article
Closed access
PDF file
MYMo Yang
Mo Yang
LYLijun Yang
Lijun Yang
WHWei Hou
Wei Hou
TZTiantian Zou
Tiantian Zou
YHYouyu Huang
Youyu Huang
RLRuijin Liao
Ruijin Liao

25 July 2019 in IEEE Access
Verified
Journal Article
Open access
MYMo Yang
Mo Yang
LYLijun Yang
Lijun Yang
TZTiantian Zou
Tiantian Zou
WHWei Hou
Wei Hou
RLRuijin Liao
Ruijin Liao
Kevlar pulp treated with low temperature plasma and Nano cellulose fibrils (NCF) have been introduced as reinforcements in the preparation for composite insulating paper with low relative permittivity, dielectric loss, good mechanical properties, and thermal stability. More polar groups of Kevlar fibers could be exposed after plasma treatment. Results showed that the relative permittivity of the composite paper containing 20% Kevlar pulp, 10% NCF and 70% softwood pulp decreased by 29.6% and the dielectric loss decreased by 43.2% at 50 Hz, 25 °C, compared with the conventional paper formed by pure softwood pulp. The change was due to the introduction of Kevlar pulp with intrinsic low dielectric constant and loss, which decreases the whole polarizability of the paper. The mechanical properties of the composite paper became worse after introducing 20% Kevlar pulp. 10% NCF can work as a mechanical reinforcement to compensate for the tensile and Yang’s modulus loss. Scanning electron microscopy results showed that NCF could fill the void defects and improve the interface bonding of the fibers to enhance the paper mechanical properties. The composite paper also had better insulating and thermal properties than the conventional paper. It has been concluded that Kevlar pulp/NCF/softwood pulp composite paper has the potential to replace pure softwood paper for the application of high voltage AC transformer insulation.

7 May 2018 in Energies
Verified
Journal Article
Open access
PDF file
NLNingchuan Liang
Ningchuan Liang
RLRuijin Liao
Ruijin Liao
MXMin Xiang
Min Xiang
MYMo Yang
Mo Yang
Yuan YuanYuan Yuan
Yuan Yuan
The thermal aging property of oil-paper insulation is a key factor affecting the service life of transformers. In this study, nano-Al2O3 was added to insulating paper to improve its anti-thermal aging property and delay the aging rate of the insulating oil. The composite paper containing 2% nano-Al2O3 had the highest tensile strength and therefore was selected for the thermal aging test. The composite and normal papers were treated with an accelerated thermal aging experiment at the temperature of 130 °C for 56 days. The variations of the degree of polymerization (DP) and tensile strength of the insulating papers with aging time were obtained. The characteristics of the insulating oil, including color, acid content, breakdown voltage, and dielectric loss were analyzed. The results revealed that compared with a plain paper, the composite paper maintained a higher DP, and its tensile strength decreased more slowly during the aging process. The oil-impregnated composite paper presented a lighter-colored oil, less viscosity changes, and a considerably lower quantity of thermal aging products. In addition, nano-Al2O3 can effectively adsorb copper compounds and keep part of the acid products and water away from the thermal aging process. This characteristic restrained the catalysis of copper compounds and H+ in the thermal aging reaction and reduced the thermal aging speed of both the insulating paper and the insulating oil.

9 August 2018 in Polymers
Verified
Journal Article
Open access
PDF file
NLNingchuan Liang
Ningchuan Liang
RLRuijin Liao
Ruijin Liao
MXMin Xiang
Min Xiang
MYMo Yang
Mo Yang
Yuan YuanYuan Yuan
Yuan Yuan
Amine compounds can greatly enhance the thermal stability of the insulating paper used in paper-oil insulation. Many research documents focus on paper‘s excellent thermal stability, but less attention has been paid to the effect of oil on paper’s degradation. In this research paper, we study the influence of different amine compounds on the thermal stability of both paper and oil, and a mechanism for the influence on paper-oil insulation as well as an optimal formula are proposed. First, six groups of paper were modified with different proportions of dicyandiamide (DICY), melamine, and polyacrylamide (PAM). Then, an accelerated thermal aging test at 130 °C was conducted for 30 days and the thermal aging characteristics of the oil-modified paper insulation were measured. The results showed that the thermal stability of the insulation paper modified with the amine compounds was remarkably improved, and P2 (2.25 wt % melamine, 0.75 wt % DICY, and 0.2 wt % PAM) presented the best anti-aging properties. However, certain properties of oil were influenced, such as acid value, and it was found that the ammonia produced by the amine stabilizers increased the copper compound content, which led to the deterioration of the insulating oil. Moreover, using a front-line orbital energy analysis by molecule modeling, it was determined that melamine was the core thermal stabilizer for the paper among the three amine compounds used in P2.

20 December 2023 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
MYMo Yang
Mo Yang
GHGang HU
Gang HU
YGYuanyuan Gao
Yuanyuan Gao
MZMao Zhang
Mao Zhang
RLRuijin Liao
Ruijin Liao

26 May 2026
Verified
Book Chapter
Closed access
MYMo Yang
Mo Yang
XHXianming He
Xianming He
ZLZhengmei Lu
Zhengmei Lu
XZXiaofeng Zhang
Xiaofeng Zhang
XWXingguang Wang
Xingguang Wang