In this paper, the modification of natural clinoptilolite and mordenite zeolites from Almaty using acid treatment is addressed for the purposes of improving adsorption performance and for drinking water purification. Structural chemical transformation was characterized by the use of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning electron microscope (SEM) techniques. Acid treatment led to a partial dealumination that was responsible for an increase in the number of surface defects and micropores, improvement in ion exchange capacity, and selectivity toward heavy metals. Additionally, modifications greatly enhance the uptake capacities of Pb²⁺, Cd²⁺, and As³⁺. The clinoptilolite post-modification removal efficiencies reached 94%, 86%, and 84%, respectively, while mordenite zeolites achieved 95%, 90%, and 87% removal efficiencies, respectively. The enhancement of performance was related to the increase in surface area and active sites for ion exchange, verified from analysis of the Brunauer-Emmett-Teller (BET) surface area. The use of different Bhatt and Kothari methods has revealed that adsorption processes followed Langmuir isotherm models for Pb²⁺ and Cd²⁺, whereas As³⁺ adsorption was better described by the Freundlich isotherm model. However, second-order kinetics indicate that chemisorption was the dominant mechanism. Such evidence indicates spontaneity and an endothermic process, as shown from thermodynamic studies. Results showed that modified zeolites indeed had a high degree of reusability, with over 80% of the adsorption capacity retained even after five cycles. Acid-modified zeolites can provide cheaper, greener methods of purification, generating only negligible secondary waste when compared to conventional methods of water purification, for example, activated carbon and membrane filtration. Results from this study proved that modified clinoptilolite and mordenite zeolites have the potential for sustainable heavy metal treatment in drinking water purification systems.

A new iodine–dextrin–lithium complex (IDLC) was synthesized and structurally characterized as a hybrid supramolecular system combining antiseptic, stabilizing, and biocompatible components. The compound integrates iodine as the primary antimicrobial agent, lithium as a coordination and stabilization element, and dextrin as a biodegradable polysaccharide matrix enabling sustained release. Physicochemical analyses confirmed the formation of a uniform, thermally stable complex. Biological evaluation revealed strong bactericidal activity, with minimum bactericidal concentrations (MBCs) ranging from 1.95 to 15.63 µg mL⁻¹ against both Gram-positive and Gram-negative pathogens, including multidrug-resistant Staphylococcus aureus and Acinetobacter baumannii. Cytotoxicity studies revealed moderate, concentration-dependent effects on human peripheral blood mononuclear cells (CC₅₀ = 0.23–0.48 mg/mL; 11.7–24.4 μg I/mL) and low toxicity toward MDCK cells (CC₅₀ = 10–20 mg/mL; 507–1014 μg I/mL), confirming a favorable safety profile. IDLC exhibited cytotoxic effects on tumor cell lines (HepG2, HeLa, AGS, K562, and H9) as well as on the normal MeT-5A cell line; however, the CC₅₀ values are similar, and selectivity indices are close to 1, indicating no selective cytotoxicity toward tumor cells. Thus, IDLC demonstrates non-specific cytotoxicity at high concentrations, consistent with its iodine content. The research confirms that iodine can be effectively stabilized within a dextrin-lithium framework to yield a biologically active, thermally resistant complex, suitable for pharmaceutical use.

In this paper the modification of natural clinoptilolite and mordenite zeolites from Almaty using acid treatment is addressed for the purposes of improving adsorption performance and for drinking water purification. Structural chemical transformation was characterized by the use of XRD, FTIR, and SEM techniques. Acid treatment led to a partial dealumination that was responsible for the increase in number of surface defects and micropores, improvement in ion exchange capacity and selectivity toward heavy metals. Additionally, modifications greatly enhance the uptake capacities of Pb²⁺, Cd²⁺ and As³⁺. The clinoptilolite post-modification removal efficiencies reached 94%, 86%, and 84% respectively, while mordenite zeolites achieved 95%, 90%, and 87% removal efficiencies respectively. The enhancement of performance was related to the increase of surface area and active sites for ion exchange, verified from analysis of BET surface area. The use of different Bhatt and Kothari methods has revealed that adsorption processes followed Langmuir isotherm models for Pb²⁺ and Cd²⁺, whereas As³⁺ adsorption was better described by the Freundlich isotherm model. However, second-order kinetics indicate that chemisorption was the dominant mechanism. Such evidence indicates spontaneity and an endothermic process, as shown from thermodynamic studies. Results showed that modified zeolites indeed had a high degree of reusability, with over 80% of the adsorption capacity retained even after five cycles. Acid-modified zeolites can provide cheaper, greener methods of purification, generating only negligible secondary waste when compare to conventional methods of water purification, for example, activated carbon and membrane filtration. Results from this study proved that modified clinoptilolite and mordenite zeolites have the potential for sustainable heavy metal treatment in drinking water purification systems.

A new iodine-dextrin-lithium complex (IDLC) was synthesized and structurally characterized as a hybrid supramolecular system combining antiseptic, stabilizing, and biocompatible components. The compound integrates iodine as the primary antimicrobial agent, lithium as a coordination and stabilization element, and dextrin as a biodegradable polysaccharide matrix enabling sustained release. Physicochemical analyses confirmed the formation of a uniform, thermally stable complex. Biological evaluation revealed strong bactericidal activity, with minimum bactericidal concentrations (MBC) ranging from 1.95 to 15.63 µg ml-1 against both Gram-positive and Gram-negative pathogens, including multidrug-resistant Staphylococcus aureus and Acinetobacter baumannii. The complex also demonstrated inhibitory effects in virus-infected MDCK cell cultures. Cytotoxicity studies showed CC50 = 0.23-0.48 mg ml-1 on human MNCs and more than 10 mg ml-1 on MDCK cells, confirming low toxicity. The results of the study on the cytotoxicity of IDLC suggest a cytotoxic effect on tumor cell lines such as HepG2, HeLa, AGS, K562, and H9, as well as normal cell lines MeT-5A. Therefore, it can be estimated that IDLC has the potential to be a new drug with antitumor activity against these cell lines. The research confirms that iodine can be effectively stabilized within a dextrin-lithium framework to yield a biologically active, thermally resistant complex, suitable for pharmaceutical use.

This study evaluates the effectiveness of natural zeolite (Shankhanai deposit, Kazakhstan) as a functional hydroponic substrate compared to a commercial foamed-glass control (GrowPlant). Using the Nutrient Film Technique (NFT), we assessed the growth and metabolic responses of Medicago sativa L. and three cultivars of Lactuca sativa L. Brunauer–Emmett–Teller (BET) analysis confirmed that zeolite (particle size 3.70 ± 1.20 mm) possesses a high specific surface area (21.80 m²/g), significantly exceeding the control (0.49 m²/g). This structure ensured superior moisture retention and cation exchange, even after a moderate decrease in surface area to 16.66 m²/g post-cultivation due to organic pore-filling. In M. sativa experiments, zeolite increased seedling viability and promoted a more branched root system compared to the artificial substrate. Gas chromatography–mass spectrometry (GC–MS) metabolic profiling of L. sativa revealed a significant substrate-driven reprogramming: zeolite increased the relative proportion of fatty acids and their derivatives (up to +51.27% in May King variety roots), suggesting membrane-protective adaptation. Genotype-specific responses were observed, with the Yeralash cultivar showing increased polyol synthesis (+2.93%) for osmoregulation. The results demonstrate that natural zeolite is an efficient, stable substrate for intensive hydroponics, optimizing root development and physiological stability through enhanced nutrient and water management.

Iodine deficiency remains a significant nutritional problem, which stimulates the search for sustainable approaches to biofortification of vegetable crops. The aim of the work was to develop a "smart" bio-iodine fertilizer based on the organoiodide complex 1-carboxy-2-phenylethan-1-aminium iodide 2-azaniumyl-3-phenylpropanoate (PPI) and highly porous biochar from agro-waste, assessing its efficiency on the parsley model. PPI was synthesized and characterized (IR/UV spectroscopy, thermal analysis), biochar was obtained by KOH activation and studied by low-temperature nitrogen adsorption (S_BET) methods, as well as standard physicochemical characterization. The granulated composition PPI + biochar (BIOF) was tested in pot experiments in comparison with KI and control; The biomass of leaves and roots, iodine and organic nitrogen content, and antioxidant indices (ascorbic acid, total polyphenols, antioxidant activity) were assessed. BIOF provided a significant increase in yield and nutrition: leaf mass reached 86.55 g/plant versus 77.72 g/plant with KI and 65.04 g/plant in the control; root mass — up to 8.25 g/plant (p<0.05). Iodine content in leaves and roots increased to 11.86 and 13.23 mg/kg (d. w.), respectively, while organic nitrogen levels increased simultaneously (57.37 and 36.63 mg/kg). A significant increase in the antioxidant status was noted (ascorbic acid 36.46 mg/100 g dry weight; antioxidant activity 44.48 mg GA/g; polyphenols 23.79 mg GA/g). The presented data show that the combination of PPI with activated biochar forms an effective platform for controlled supply of iodine to plants, increasing the yield and functional qualities of products; the prospects for implementation are associated with field trials and dosage optimization.