Problems with increasing heavy metal contents in natural waters are becoming a global issue. At the same time, improved methods for water treatment are becoming increasingly important. In this context, natural zeolites can be used to purify polluted water. In this paper, we investigated how the adsorption capacity of natural zeolites can be improved. Natural zeolites from the Shankanay district, Almaty, Kazakhstan, were used as adsorbent material for experiments on improving the water treatment of heavy metals. We found that the adsorption capacity for heavy metals was increased greatly by thermal activation using furnace treatment. The optimal thermal activation condition was about 550 °C for a duration of 2 h. However, the improved adsorption capacity for different heavy metals varied depending on the heat treatment temperature. Adsorption by the heat-treated zeolites at a temperature of 550 °C was 87% for nickel, 99% for copper and cadmium, and 100% for lead. Adsorption by heat-treated zeolites at a temperature of 500 °C was 78% for nickel, 98% for copper, 83% for cadmium, and 88% for lead. The residual concentration of heavy metals in the filtered water did not exceed the maximum permissible concentrations for drinking purposes. In all experiments, intense adsorption took place during the first 10 min representing 35 to 61% of the metal ions in the water. Adsorption properties were verified using adsorption capacity (BET), IR spectroscopy, and scanning electron microscopy. The study shows that modified Shankanay natural zeolites have great potential as a low-cost adsorbent material for purifying water from heavy metals.

This study explores the sorption capacity and field application of activated carbons (ACs) derived from plant residues for the remediation of oil-contaminated soils. ACs were prepared from rice husks, reed stalks, pine sawdust and wheat straw using two-stage pyrolysis and chemical activation with potassium hydroxide. The structural and physicochemical properties of these ACs were analyzed using BET surface area measurements, SEM analysis, Raman spectroscopy and FTIR spectroscopy. Sorption experiments at room temperature demonstrated that AC from rice husks (OSL) exhibited the highest sorption capacities for gasoline, kerosene and diesel fuel, with values of 9.3 g/g, 9.0 g/g and 10.1 g/g, respectively. These results are attributed to the well-developed microporous and mesoporous structures of OSL, as confirmed by SEM images and a BET surface area of 2790 m²/g. Field tests conducted at the “Zhanatalap” oil deposit showed that the ACs effectively reduced the oil content in contaminated soils from 79.2 g/kg to as low as 2.6 g/kg, achieving a purification degree of up to 67% within 16 days. This study highlights the critical role of structural properties, such as porosity and graphitization degree, in enhancing the sorption efficiency of ACs.

This study investigates the potential of biochar derived from various biomass sources: apricot kernel (AK), pine sawdust (PS), rice husk (RH), wheat straw (WS), and reed stem (RS) to enhance the yield, nutritional quality, and environmental sustainability of parsley crops. Comprehensive characterization through SEM, EDAX, nitrogen adsorption–desorption isotherms, and FTIR analyses identified AK biochar as the most suitable for further enrichment due to its superior specific surface area (512.3 m²/g) and iodine number (51.23 mg/g). EDAX analysis revealed that AK biochar exhibited the highest carbon content (92.1%), while RH biochar contained the highest silicon content (46%), indicating different potential applications. FTIR analysis identified key functional groups, such as carbonyl (1740 cm⁻¹) and hydroxyl (3430 cm⁻¹) groups, which contribute to the biochar’s reactivity and potential effectiveness in various applications. The effects of selenium (Na₂SeO₄), iodine (KI), their combination (Na₂SeO₄ + KI), and BISF (biochar‐enriched iodine and selenium fertilizer) on parsley growth, antioxidant properties, and nutrient accumulation were evaluated. The results demonstrated that joint applications of iodide and selenate led to a 3.1‐fold increase in iodine content (up to 16.8 mg/kg d.w.) and a 1.2‐fold increase in selenium accumulation (up to 2482.1 μg/kg d.w.) in parsley compared to separate treatments. Additionally, BISF treatment significantly improved key biometric parameters, with leaf weight increasing by 1.6 times (up to 326.5 g) compared to the control, and antioxidant content—ascorbic acid, polyphenols, and antioxidant activity—showing increases of 1.56, 1.27, and 1.50 times, respectively. This study underscores the effectiveness of selenium‐ and iodine‐enriched biochar in enhancing parsley crop yield and nutritional quality while also demonstrating the multifunctional role of biochar in environmental remediation.

In this paper, the modification of natural clinoptilolite and mordenite zeolites from Almaty using acid treatment is addressed for the purposes of improving adsorption performance and for drinking water purification. Structural chemical transformation was characterized by the use of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning electron microscope (SEM) techniques. Acid treatment led to a partial dealumination that was responsible for an increase in the number of surface defects and micropores, improvement in ion exchange capacity, and selectivity toward heavy metals. Additionally, modifications greatly enhance the uptake capacities of Pb²⁺, Cd²⁺, and As³⁺. The clinoptilolite post-modification removal efficiencies reached 94%, 86%, and 84%, respectively, while mordenite zeolites achieved 95%, 90%, and 87% removal efficiencies, respectively. The enhancement of performance was related to the increase in surface area and active sites for ion exchange, verified from analysis of the Brunauer-Emmett-Teller (BET) surface area. The use of different Bhatt and Kothari methods has revealed that adsorption processes followed Langmuir isotherm models for Pb²⁺ and Cd²⁺, whereas As³⁺ adsorption was better described by the Freundlich isotherm model. However, second-order kinetics indicate that chemisorption was the dominant mechanism. Such evidence indicates spontaneity and an endothermic process, as shown from thermodynamic studies. Results showed that modified zeolites indeed had a high degree of reusability, with over 80% of the adsorption capacity retained even after five cycles. Acid-modified zeolites can provide cheaper, greener methods of purification, generating only negligible secondary waste when compared to conventional methods of water purification, for example, activated carbon and membrane filtration. Results from this study proved that modified clinoptilolite and mordenite zeolites have the potential for sustainable heavy metal treatment in drinking water purification systems.

The sustainable operation of hydroponic systems depends on maintaining the chemical stability of circulating nutrient solutions and preventing the accumulation of toxic compounds. The accumulation of phytotoxic ammonium, heavy metals, and organic metabolites in recirculating nutrient solutions remains one of the key challenges limiting the efficiency, sustainability, and scalability of hydroponic cultivation. This review provides a comprehensive comparative analysis of zeolites, activated carbons (ACs), and their functionalized and composite forms as key sorbents for nutrient management, contaminant removal, and environmental safety in hydroponic cultivation. Natural zeolites, with their well-defined crystalline structure and high ion-exchange selectivity toward ammonium and heavy metal cations, enable effective NH₄⁺/K⁺ balance regulation and phytotoxicity mitigation. ACs, characterized by high specific surface area and tunable surface chemistry, complement zeolites by offering extensive adsorption capacity for organic compounds, root exudates, and pesticide residues, thereby extending the operational lifespan of nutrient solutions and improving overall system performance. Further advancements include the integration of zeolites and ACs with two-dimensional (graphene, g-C₃N₄) and three-dimensional (MOF, COF) frameworks, yielding multifunctional materials that combine adsorption, ion exchange, photocatalysis, and nutrient regulation. Transition-metal modification, particularly with Fe, Mn, Cu, Ni, and Co, introduces redox-active centers that enhance sorption, catalysis, and phosphate stabilization. The comparative synthesis reveals that the combined application of zeolite- and carbon-based composites offers a synergistic strategy for developing adaptive and low-waste hydroponic systems. From a techno-economic and environmental standpoint, the judicious application of these materials paves the way for more resilient, efficient, and circular hydroponic systems, reducing fertilizer and water consumption, lowering contaminant discharge, and enhancing food security. This systematic review was conducted according to the PRISMA 2020 guidelines. Relevant studies were identified through Scopus, Web of Science, and Google Scholar databases using specific inclusion and exclusion criteria.

The transportation sector significantly contributes to greenhouse gas (GHG) emissions and remains a key research focus on emission quantification and mitigation. Although numerous models exist for estimating vehicle-based emissions, most lack accuracy at regional scales, particularly in remote or underdeveloped areas, including backcountry national parks and mountainous regions lacking basic infrastructure. This study addresses that gap by developing and applying a terrain-adjusted, segment-based methodology to estimate GHG emissions from tourist vehicles in Altai Tavan Bogd National Park, one of Mongolia’s most remote protected areas. The proposed method uses Tier 1 IPCC emission factors but incorporates field-segmented route analysis, vehicle categorization, and terrain-based fuel adjustments to achieve a spatially disaggregated Tier 1 approach. Results show that carbon dioxide (CO₂) emissions increased from 118.7 tons in 2018 to 2239 tons in 2024. Tourist vehicle entries increased from 712 in 2018 to 13,192 in 2024, with 99.1% of entries occurring between May and October. Over the same period, cumulative methane (CH₄) and nitrous oxide (N₂O) emissions were estimated at 300.9 kg and 45.75 kg, respectively. This modular approach is especially suitable for high-altitude, infrastructure-limited regions where real-time emissions monitoring is not feasible. By integrating localized travel patterns with global frameworks such as the IPCC 2006 Guidelines, this model enables more precise and context-sensitive GHG estimates from vehicles in national parks and similar environments.