This study explores the sorption capacity and field application of activated carbons (ACs) derived from plant residues for the remediation of oil-contaminated soils. ACs were prepared from rice husks, reed stalks, pine sawdust and wheat straw using two-stage pyrolysis and chemical activation with potassium hydroxide. The structural and physicochemical properties of these ACs were analyzed using BET surface area measurements, SEM analysis, Raman spectroscopy and FTIR spectroscopy. Sorption experiments at room temperature demonstrated that AC from rice husks (OSL) exhibited the highest sorption capacities for gasoline, kerosene and diesel fuel, with values of 9.3 g/g, 9.0 g/g and 10.1 g/g, respectively. These results are attributed to the well-developed microporous and mesoporous structures of OSL, as confirmed by SEM images and a BET surface area of 2790 m²/g. Field tests conducted at the “Zhanatalap” oil deposit showed that the ACs effectively reduced the oil content in contaminated soils from 79.2 g/kg to as low as 2.6 g/kg, achieving a purification degree of up to 67% within 16 days. This study highlights the critical role of structural properties, such as porosity and graphitization degree, in enhancing the sorption efficiency of ACs.

In this paper, the modification of natural clinoptilolite and mordenite zeolites from Almaty using acid treatment is addressed for the purposes of improving adsorption performance and for drinking water purification. Structural chemical transformation was characterized by the use of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning electron microscope (SEM) techniques. Acid treatment led to a partial dealumination that was responsible for an increase in the number of surface defects and micropores, improvement in ion exchange capacity, and selectivity toward heavy metals. Additionally, modifications greatly enhance the uptake capacities of Pb²⁺, Cd²⁺, and As³⁺. The clinoptilolite post-modification removal efficiencies reached 94%, 86%, and 84%, respectively, while mordenite zeolites achieved 95%, 90%, and 87% removal efficiencies, respectively. The enhancement of performance was related to the increase in surface area and active sites for ion exchange, verified from analysis of the Brunauer-Emmett-Teller (BET) surface area. The use of different Bhatt and Kothari methods has revealed that adsorption processes followed Langmuir isotherm models for Pb²⁺ and Cd²⁺, whereas As³⁺ adsorption was better described by the Freundlich isotherm model. However, second-order kinetics indicate that chemisorption was the dominant mechanism. Such evidence indicates spontaneity and an endothermic process, as shown from thermodynamic studies. Results showed that modified zeolites indeed had a high degree of reusability, with over 80% of the adsorption capacity retained even after five cycles. Acid-modified zeolites can provide cheaper, greener methods of purification, generating only negligible secondary waste when compared to conventional methods of water purification, for example, activated carbon and membrane filtration. Results from this study proved that modified clinoptilolite and mordenite zeolites have the potential for sustainable heavy metal treatment in drinking water purification systems.

The sustainable operation of hydroponic systems depends on maintaining the chemical stability of circulating nutrient solutions and preventing the accumulation of toxic compounds. The accumulation of phytotoxic ammonium, heavy metals, and organic metabolites in recirculating nutrient solutions remains one of the key challenges limiting the efficiency, sustainability, and scalability of hydroponic cultivation. This review provides a comprehensive comparative analysis of zeolites, activated carbons (ACs), and their functionalized and composite forms as key sorbents for nutrient management, contaminant removal, and environmental safety in hydroponic cultivation. Natural zeolites, with their well-defined crystalline structure and high ion-exchange selectivity toward ammonium and heavy metal cations, enable effective NH₄⁺/K⁺ balance regulation and phytotoxicity mitigation. ACs, characterized by high specific surface area and tunable surface chemistry, complement zeolites by offering extensive adsorption capacity for organic compounds, root exudates, and pesticide residues, thereby extending the operational lifespan of nutrient solutions and improving overall system performance. Further advancements include the integration of zeolites and ACs with two-dimensional (graphene, g-C₃N₄) and three-dimensional (MOF, COF) frameworks, yielding multifunctional materials that combine adsorption, ion exchange, photocatalysis, and nutrient regulation. Transition-metal modification, particularly with Fe, Mn, Cu, Ni, and Co, introduces redox-active centers that enhance sorption, catalysis, and phosphate stabilization. The comparative synthesis reveals that the combined application of zeolite- and carbon-based composites offers a synergistic strategy for developing adaptive and low-waste hydroponic systems. From a techno-economic and environmental standpoint, the judicious application of these materials paves the way for more resilient, efficient, and circular hydroponic systems, reducing fertilizer and water consumption, lowering contaminant discharge, and enhancing food security. This systematic review was conducted according to the PRISMA 2020 guidelines. Relevant studies were identified through Scopus, Web of Science, and Google Scholar databases using specific inclusion and exclusion criteria.

The transportation sector significantly contributes to greenhouse gas (GHG) emissions and remains a key research focus on emission quantification and mitigation. Although numerous models exist for estimating vehicle-based emissions, most lack accuracy at regional scales, particularly in remote or underdeveloped areas, including backcountry national parks and mountainous regions lacking basic infrastructure. This study addresses that gap by developing and applying a terrain-adjusted, segment-based methodology to estimate GHG emissions from tourist vehicles in Altai Tavan Bogd National Park, one of Mongolia’s most remote protected areas. The proposed method uses Tier 1 IPCC emission factors but incorporates field-segmented route analysis, vehicle categorization, and terrain-based fuel adjustments to achieve a spatially disaggregated Tier 1 approach. Results show that carbon dioxide (CO₂) emissions increased from 118.7 tons in 2018 to 2239 tons in 2024. Tourist vehicle entries increased from 712 in 2018 to 13,192 in 2024, with 99.1% of entries occurring between May and October. Over the same period, cumulative methane (CH₄) and nitrous oxide (N₂O) emissions were estimated at 300.9 kg and 45.75 kg, respectively. This modular approach is especially suitable for high-altitude, infrastructure-limited regions where real-time emissions monitoring is not feasible. By integrating localized travel patterns with global frameworks such as the IPCC 2006 Guidelines, this model enables more precise and context-sensitive GHG estimates from vehicles in national parks and similar environments.

This study investigates the characteristics of activated carbons derived from biomass plant residues: rice husk (OSL) of the genus Oryza, reed stalks (PhAC) of the genus Phragmites, pine sawdust (PSL) of the genus Pinus, and wheat straw (TAL) of the genus Triticum. Activation was carried out using potassium hydroxide, employing a two-stage pyrolysis under air. The study examined the influence of activation temperature, duration, concentration of the impregnating agent, and impregnation time. Characteristics such as sorbent porosity, bulk density, and hydrocarbon sorption capacity were determined. Adsorption capacity was assessed using BET analysis and the iodine number determination method, with the highest iodine number achieved being 2809 mg/g, indicating high adsorption capability. The structural morphology of the activated carbons was evaluated by SEM, and their chemical surface characteristics were identified by IR spectroscopy. Computational analysis of the nitrogen sorption isotherms using the Barrett-Joyner-Halenda (B-J-H) method and the Dubinin-Radushkevich (D-R) equation showed that activated carbon samples from rice husk and pine sawdust possess a developed specific surface area and contain micro- and mesopores. The Dubinin-Astakhov (D-A) approach was used to study the pore diameter of activated carbon, revealing significant findings on pore structure. The maximum micropore volume was found in activated carbon samples from pine sawdust (PSL), measuring 0.46 cm³/g. All activated carbon samples of plant origin were tested under field conditions for the remediation of oil-contaminated areas near the “Zhanatalap” oil field in the Atyrau region. By the 16th day, the oil-contaminated soil treated with rice husk activated carbon was cleaned by 67.1%.

In this paper the modification of natural clinoptilolite and mordenite zeolites from Almaty using acid treatment is addressed for the purposes of improving adsorption performance and for drinking water purification. Structural chemical transformation was characterized by the use of XRD, FTIR, and SEM techniques. Acid treatment led to a partial dealumination that was responsible for the increase in number of surface defects and micropores, improvement in ion exchange capacity and selectivity toward heavy metals. Additionally, modifications greatly enhance the uptake capacities of Pb²⁺, Cd²⁺ and As³⁺. The clinoptilolite post-modification removal efficiencies reached 94%, 86%, and 84% respectively, while mordenite zeolites achieved 95%, 90%, and 87% removal efficiencies respectively. The enhancement of performance was related to the increase of surface area and active sites for ion exchange, verified from analysis of BET surface area. The use of different Bhatt and Kothari methods has revealed that adsorption processes followed Langmuir isotherm models for Pb²⁺ and Cd²⁺, whereas As³⁺ adsorption was better described by the Freundlich isotherm model. However, second-order kinetics indicate that chemisorption was the dominant mechanism. Such evidence indicates spontaneity and an endothermic process, as shown from thermodynamic studies. Results showed that modified zeolites indeed had a high degree of reusability, with over 80% of the adsorption capacity retained even after five cycles. Acid-modified zeolites can provide cheaper, greener methods of purification, generating only negligible secondary waste when compare to conventional methods of water purification, for example, activated carbon and membrane filtration. Results from this study proved that modified clinoptilolite and mordenite zeolites have the potential for sustainable heavy metal treatment in drinking water purification systems.