Copper niobate (CuNb2O6) is an important compound due to its low cost and polymorphism, presenting monoclinic and orthorhombic phases, which leads to unique physical–chemical properties. The electrochemical performance of efficient electrocatalysts for the oxygen evolution reaction (OER) is of importance in order to produce hydrogen gas from water. In this context, this work reports the synthesis of CuNb2O6 particles by high-energy milling for 5 and 10 h, and subsequent thermal treatment at 900 °C for 3 h. The samples were characterized by XRD, XRF, FESEM, RAMAN, UV–Vis, and FT-IR techniques, and were applied as electrocatalysts for the OER. The samples had both monoclinic and orthorhombic crystalline phases. The band gaps were in the range of 1.92 to 2.06 eV. In the application for the OER, the particles obtained by 5 and 10 h of milling exhibited overpotentials of 476 and 347 mV vs. RHE at 10 mA cm−2, respectively. In chronopotentiometry experiments for 15 h, the samples exhibited excellent chemical stability. The electrochemical performance of the sample milled for 10 h showed superior performance (347 mV vs. RHE) when compared with electrocatalysts of the same type, demonstrating that the methodology used to synthesize the samples is promising for energy applications.
In this project, a method was developed to synthesize ammoniacal niobium oxalate (NH4)(NbO(C2O4)(H2O)ᵧ)·XH2O, aimed at its application in the preparation of niobium-incorporated materials. This transition metal exhibits excellent properties and is widely available in Brazil. Its versatility makes it essential for metal alloys and electronic components. The synthesis was based on physical and chemical processes, including fusion, decantation, filtration, and complexation, using niobium pentoxide and potassium bisulfate. Rigorous procedures were implemented to ensure precursor quality. Material characterization was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and thermogravimetric analysis (TGA), which collectively confirmed the material's morphology, structure, and thermal stability. The results confirmed the efficient synthesis of high-purity niobium oxalate, with the developed method demonstrating technical feasibility by preserving the material's essential physicochemical properties, as verified by the characterization techniques. Key innovations included replacing acid leaching with a more efficient method, implementing neutral-pH decantation instead of traditional acidic processes, and the strategic use of an aqueous acetic acid solution in the washing step. This combination of advancements enabled a 75% reduction in water consumption during the washing stage, thus establishing a significantly more sustainable synthesis protocol for producing this precursor without compromising final product quality.