The optimization of photoinjector brightness is crucial for achieving the highest performance at X-ray free-electron lasers. To this end, photocathode laser pulse shaping has been identified as a key technology for enhancing photon flux and lasing efficiency at short wavelengths. Supported by beam dynamics simulations, we identify transversely and longitudinally truncated Gaussian electron bunches as a beneficial bunch shape in terms of the projected emittance and 5D brightness. The realization of such pulses from chirped Gaussian pulses is studied for 514 nm and 257 nm wavelengths by inserting an amplitude mask in the symmetry plane of the pulse stretcher to achieve longitudinal shaping and an aperture for transverse beam shaping. Using this scheme, transversely and longitudinally truncated Gaussian pulses can be generated and later used for the production of up to 3 nC electron bunches in the photoinjector. The 3D pulse shape at a wavelength of 514 nm is characterized via imaging spectroscopy, and second-harmonic generation frequency-resolved optical gating (SHG FROG) measurements are also performed to analyze the shaping scheme’s efficacy. Furthermore, this pulse-shaping scheme is transferred to a UV stretcher, allowing for direct application of the shaped pulses to cesium telluride photocathodes.
1 September 2025 in Journal of Physics: Conference Series
At PITZ, a comprehensive study is conducted to analyse the factors influencing emittance growth in the European XFEL (EuXFEL) continuous wave (CW) setup. Emittance growth due to space charge effects can be mitigated using advanced photocathode laser pulse shapes. To optimize beam quality, multi-objective optimization studies using ASTRA are performed, focusing not only on minimizing emittance but also on maximizing beam brightness for various laser temporal profiles and durations. The optimization is initially carried out for the CW superconducting radio-frequency (SRF) injector section planned for EuXFEL. The optimized cases are then further tracked through start-to-end (S2E) simulations to evaluate their behaviour in the compression stages of EuXFEL. A comparative analysis of gaussian, flattop, ellipsoidal, and inverted parabolic laser profiles is presented, assessing their efficiency not only in terms of emittance but also in 4D and 6D brightness. Finally, the results of the optimized photoinjector setup and the beam properties after the final bunch compression are presented.