We propose a method of measuring the terahertz (THz) Raman spectra of a material. As Raman spectroscopy is a measurement of the relative frequency spectrum relative to the frequency of the excitation source, sometimes it is not necessary to use an expensive THz source and THz detector. Instead, an ultraviolet, visible, or infrared excitation source and corresponding detector can be used. A combination of prisms and gratings is used to widen the field of view at high resolution. The resolution of the system is 4.945 cm⁻¹ (0.149 THz), and the spectral range is 2531.84 cm⁻¹ (75.963 THz). We measured the THz Raman spectra of solid powder, aqueous solutions, and mixtures, and studied the effects of environment, container material, and time of measurement on the spectra. The results show that the system is not significantly affected by interference from the water environment and has good stability and repeatability. This method can be applied in many fields such as material detection and environmental protection.

When scanning beam interference lithography (SBIL) technology is used for grating fabrication, the stroke, bearing capacity, and accuracy of the workbench determine the size and accuracy of the grating. For large-area gratings with dimensions exceeding the meter level, the existing workbench cannot fully meet the requirements. Therefore, the structure design, drive type, and assembly technology of the workbench were studied in this research, and a two-dimensional workbench with a large stroke, heavy load, and high precision was developed. The performance of this workbench was tested. The stroke of the workbench can reach 1800 mm × 700 mm; the straightness is better than 1.5 μm for the whole stroke range. The load can be up to 2.5 t and the positioning accuracy can achieve the nanometer level. A scanning exposure experiment was carried out with this workbench and a grating of 1400 mm × 420 mm was made. The performance index of the grating was outstanding, achieving the intended goals of the experiment.

The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》，当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊，刊载内容突破了文摘的限制，正式成为学术刊物。