This communication presents a wideband high-efficiency reflectarray antenna with a low radar cross section (RCS) based on metal pillars inserted absorptive frequency-selective reflector (AFSR). The AFSR is realized by the bent resistor-embedded metal strip, whose multimode resonance is utilized to obtain the wideband absorption-reflection-absorption performance. In addition, the realized AFSR is with compact lattice spacing characteristics, which enhances the antenna's radiation efficiency. Then, the metal pillars with variable heights are inserted into the AFSR serving as a phase shifter to flexibly control the reflection phase within the wide reflection band. Simulated and measured results show that the proposed reflectarray antenna has a pencil-beam radiation pattern from 6 to 8 GHz with an aperture efficiency up to 60.4%. Additionally, two RCS reduction bands with the fractional bandwidth of 66.7% and 32.3% are obtained.
11 January 2021 in IEEE Internet of Things Journal
With the exponential increase of interconnected communicating devices which make up the Internet of Things (IoT), securing the network transmission and the fifth generation (5G) systems which is the bedrock for IoT concept actualization is becoming more and more challenging. One of the major attacks which poses a great risk to data transmission is the eavesdropper (Eve) attack which occurs in both single input, single output (SISO), multiple input and multiple output (MIMO) systems. Thus, in this study, our focus is to establish a secured connection in a multiple-antenna transmission when the channel state information (CSI) of Eve is unknown to the network users. Our model comprises a secure wireless communication standard where Eve performs either optimal matched filtering (OMF) or a basic matched filtering (BMF) while the transmitting IoT node employs smart jamming strategy in order to compromise the activities of Eve. With respect to this and in attempt to realize maximum privacy, we examined the design of optimal jamming parameters. In the end, the numerical analysis of our investigation indicates that a substantial privacy advantage is achievable while utilizing only full-duplex jamming against using artificial noise from the transmitter only. However, a joint performance of both results shows a higher privacy improvement.
This paper describes a dual-band diffusive metasurface-based reflector, with a specular reflection band together with two sidebands which exhibit low radar cross-section (RCS). A rhombus-shaped patch-ring type of polarizer with dual-band characteristics is chosen as the fundamental unit cell. The polarizer and its mirror structure have opposite phases in the polarization-rotating bands, while their phase is the same in the reflection band, which is juxtaposed in-between the middle of the two polarization-rotating bands. The designed metasurface is constructed, based on the phase cancellation theory, by arranging arrays of these two unit cells in a two-dimensional pattern. The measured results show that the realized metasurface-based reflector achieves a high-efficiency specular window from 26.2 to 38.8 GHz together with two low-RCS side-bands from 18.18 to 24.6 GHz and 40.61 to 56.4 GHz. The proposed diffusive metasurface can be potentially used as a reflector for reflector antennas, which provides a highly efficient in-band radiation together with low backscattering out-of-band.
Accurate current sensing in rectangular conductors is challenged by mechanical deformations, including eccentricity (X/Y-axis shifts) and inclination (Z-axis tilt), which distort magnetic field distributions and induce measurement errors. To address this, we propose a bio-inspired error compensation strategy integrating an elliptically configured Hall sensor array with a hybrid Grey Wolf Optimizer (GWO)-enhanced backpropagation neural network. The eccentric displacement and tilt angle of the conductor are quantified via a three-dimensional magnetic field reconstruction and current inversion modeling. A dual-stage optimization framework is implemented: first, establishing a BP neural network for real-time conductor state estimations, and second, leveraging the GWO’s swarm intelligence to refine network weights and thresholds, thereby avoiding local optima and enhancing the robustness against asymmetric field patterns. The experimental validation under extreme mechanical deformations (X/Y-eccentricity: ±8 mm; Z-tilt: ±15°) demonstrates the strategy’s efficacy, achieving a 65.07%, 45.74%, and 76.15% error suppression for X-, Y-, and Z-axis deviations. The elliptical configuration reduces the installation footprint by 72.4% compared with conventional circular sensor arrays while maintaining a robust suppression of eccentricity- and tilt-induced errors, proving critical for space-constrained applications, such as electric vehicle powertrains and miniaturized industrial inverters. This work bridges bio-inspired algorithms and adaptive sensing hardware, offering a systematic solution to mechanical deformation-induced errors in high-density power systems.
Current denoising algorithms in infrared imaging systems predominantly target either high-frequency stripe noise or Gaussian noise independently, failing to adequately address the prevalent hybrid noise in real-world scenarios. To tackle this challenge, we propose a convolutional neural network (CNN)-based approach with a refined composite loss function, specifically designed for hybrid noise removal in raw infrared images. Our method employs a residual network backbone integrated with an adaptive weighting mechanism and edge-preserving loss, enabling joint modeling of multiple noise types while safeguarding structural edges. Unlike reference-based CNN denoising methods requiring clean images, our solution leverages intrinsic gradient variations within image sequences for adaptive smoothing, eliminating dependency on ground-truth data during training. Rigorous experiments conducted on three public datasets have demonstrated the optimal or suboptimal performance of our method in mixed noise suppression and detail preservation (PSNR > 32.13/SSIM > 0.8363).