This communication presents a wideband high-efficiency reflectarray antenna with a low radar cross section (RCS) based on metal pillars inserted absorptive frequency-selective reflector (AFSR). The AFSR is realized by the bent resistor-embedded metal strip, whose multimode resonance is utilized to obtain the wideband absorption-reflection-absorption performance. In addition, the realized AFSR is with compact lattice spacing characteristics, which enhances the antenna's radiation efficiency. Then, the metal pillars with variable heights are inserted into the AFSR serving as a phase shifter to flexibly control the reflection phase within the wide reflection band. Simulated and measured results show that the proposed reflectarray antenna has a pencil-beam radiation pattern from 6 to 8 GHz with an aperture efficiency up to 60.4%. Additionally, two RCS reduction bands with the fractional bandwidth of 66.7% and 32.3% are obtained.
Many real-world engineering problems need to balance different objectives and can be formatted as multi-objective optimization problem. An effective multi-objective algorithm can achieve a set of optimal solutions that can make a tradeoff between different objectives, which is valuable to further explore and design. In this paper, an improved multi-objective differential evolution algorithm (MOEA/D/DEM) based on a decomposition strategy is proposed to improve the performance of differential evolution algorithm for practical multi-objective nutrition decision problems. Firstly, considering the neighborhood characteristic, a neighbor intimacy factor is designed in the search process for enhancing the diversity of the population, then a new Gaussian mutation strategy with variable step size is proposed to reduce the probability of escaping local optimum area and improve the local search ability. Finally, the proposed algorithm is tested by classic test problems (DTLZ1-7 and WFG1-9) and applied to the multi-objective nutrition decision problems, compared to the other reported multi-objective algorithms, the proposed algorithm has a better search capability and obtained competitive results.
15 September 2021 in IEEE Transactions on Antennas and Propagation
A novel methodology to create metallic waveguides with multilayer integrated vertical-electromagnetic bandgap (EBG) structure is proposed in this article, and the structure realizes low-cost millimeter-wave (mmWave) slot array antennas. A multilayer stack of easy-to-process thin metallic etching plates is introduced to design mmWave waveguide using compression fit instead of diffusion bonding and welding assembly process. The electromagnetic (EM) wave leakage from the gaps between the metallic plates is suppressed using the vertical-EBG structure and antiphasing feeding. The dispersion diagrams of the vertical-EBG unit cell are investigated to illustrate the suppression of leakage. Another leakage wave intercepting methodology is adopted by antiphase feeding to prevent leakage wave from the adjacent slot subarrays. Finally, two examples of 2 $\times $ 8 and 8 $\times $ 8 slot array antennas are presented to verify our design concept. The measured impedance bandwidths of the two antennas are 77.1–84.6 GHz (9.3%) and 78.6–84.9 GHz (7.7%). In addition, the 3 dB broadside gain bandwidths are 73.1–85.3 GHz (15.1%) and 76.8–84.4 GHz (9.4%). The results show the aperture efficiencies up to 56.4%.
15 April 2021 in Microwave and Optical Technology Letters
A modified triangle quarter-wavelength patch is proposed in this letter, and a compact circularly polarized (CP) antenna is designed by combining two of them. The evolution process of the combined modified triangle quarter-wavelength patches is depicted, and the current distribution is analyzed to illustrate the right-hand circularly polarized (RHCP) radiation generated by the designed antenna. In order to achieve better performance, a sub-array with high-gain radiation characteristics consisting of four radiators and a power distribution network is designed and fabricated within a compact size of ${0.176\ \lambda_{0}^{2}}$ and thickness of ${0.26\ \lambda_{0}}$ The measured maximum gain is up to 8.4 dBic at 1.935 GHz and the gain is flat in the operating frequency band with maximum ripple less than 0.9 dB.