T-stubs are important components in the application of the component method; hence it is crucial to clarify the T-stub mechanism for the analysis of the mechanical properties of steel joints. In this study, the mechanical behavior of T-stubs was assessed via 6 static tests and 18 finite element analysis models. The influences of flange thickness, bolt spacing, bolt diameter, and stiffener rib on initial stiffness, ultimate bearing capacity, and bolt force of T-stubs were analyzed. Furthermore, the development process and relations of the T-stub bolt force with and without stiffeners were analyzed. The results show that an effective stiffener arrangement can reduce the bending moment and prying force to a certain degree; however, offsetting the bending moment and prying force entirely is difficult. Furthermore, the influence of bending moment and prying force on the bearing capacity should be considered in the design.
This study develops an enhanced coding strategy with adaptive parameter adjustment mechanisms to address the premature convergence issue inherent in conventional genetic algorithms (GAs). An improved adaptive genetic algorithm (IAGA) is proposed for optimizing the slit pattern configurations of 16 steel-frame-slotted steel plate shear wall (SSPSW) systems. The methodology incorporates a real-time probability modulation of the crossover and mutation operations based on population diversity metrics. ABAQUS finite element software and PYTHON interactive analysis were systematically used to evaluate the mechanical performance of the optimized configurations, focusing on achieving an optimal ductility–stiffness balance under cyclic loading conditions. The numerical results demonstrate that the IAGA achieves faster convergence than standard GAs. A higher aspect ratio of the inter-slot column (l/b) or a smaller aspect ratio of the slot (b/t) leads to better ductility and lower stiffness. It is recommended that the configuration with connections on two sides of an SSPSW frame be adopted.