Jianian He

Dr. Jianian He

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2022 in Buildings
Verified
Journal Article
Open access
PDF file
JHJianian He
Jianian He
SLShuhong Lin
Shuhong Lin
YLYicheng Li
Yicheng Li
DXDong Xian
Dong Xian
SCShizhe Chen
Shizhe Chen
Frame structures equipped with steel plate shear walls (SPSWs) have been widely used in high-rise buildings due to their good seismic performance. In this study, the strip model and combined strip model were used to analyze the performance of SPSWs. Furthermore, an improved genetic algorithm (IGA) was established to optimize the steel frame for 5, 10, and 20 stories. For each layer, layout optimization was conducted to determine the best configurations of the SPSWs, and two cases of size optimizations of conventional SPSW configurations in the frame were conducted. Results indicate the following: (i) the total weight of the five-story steel frame of layout optimization to determine the best SPSW configuration was approximately 10% lighter than those of the size optimization of conventional SPSW configurations, and this proportion gap expanded to approximately 15–25% for the 10-story and 20-story steel frames; (ii) the steel frame weight could be significantly reduced if the average percentages of story shear resisted by web plates are increased; and (iii) in the steel frame of layout optimization, the structural elements, especially the plate elements, were better utilized than those of size optimization when their inter-story drift ratios met the specification requirements. These results highlight the prominent performances of some important indicators of the design of an SPSW system with the layout optimized using IGA.

19 August 2022 in Metals
Verified
Journal Article
Open access
PDF file
SCShizhe Chen
Shizhe Chen
MGMuying Guo
Muying Guo
YLYicheng Li
Yicheng Li
DXDong Xian
Dong Xian
JHJianian He
Jianian He
The welds of T-joints are prone to fatigue cracking owing to stress concentrations and welding residual stresses. Previous studies investigated the crack propagation rate using numerical simulations; however, most employed two-dimensional models and ignored the effect of residual stresses. In this study, reliable temperature and residual stress fields were obtained through numerical simulations and verified experimentally. The effects of residual stresses on crack propagation were then investigated under different loading conditions. The residual stress field caused the direction of crack propagation to shift towards the web and accelerated the crack propagation speed with increasing displacement loading.

30 March 2022 in Metals
Verified
Journal Article
Open access
PDF file
JHJianian He
Jianian He
BWBaolong Wu
Baolong Wu
NWNianduo Wu
Nianduo Wu
LCLexian Chen
Lexian Chen
ACAnyang Chen
Anyang Chen
Jia-Xiang LinJia-Xiang Lin
Jia-Xiang Lin
Bolted ball-cylinder (BBC) joints are suitable for non-purlin space structures to effectively reduce structure height and save material costs. In this paper, we present a numerical and theoretical study for high-strength steel BBC joints at elevated temperatures. An finite element (FE) model was first developed, in which the effects of elevated temperatures were considered by introducing reduction factors for the material properties of steel, such as the yield stress and Young’s modulus, to analyze the structural behavior of BBC joints subjected to compressive, tensile or bending loads. Based on parametric studies on 441 FE models, effects of the key parameters, including joint dimensions, material strength and temperatures, on the structural behavior of BBC joints are discussed. Then, theoretical analysis is conducted, and design methods are proposed to estimate the ultimate load-carrying capacity of BBC joints. Finally, we verified the accuracy of the design method by comparing the prediction with the FE results.

8 April 2023 in Buildings
Verified
Journal Article
Open access
PDF file
SCShizhe Chen
Shizhe Chen
BFBo Feng
Bo Feng
LWLu Wang
Lu Wang
YZYing Zhang
Ying Zhang
JHJianian He
Jianian He
T-stubs are important components in the application of the component method; hence it is crucial to clarify the T-stub mechanism for the analysis of the mechanical properties of steel joints. In this study, the mechanical behavior of T-stubs was assessed via 6 static tests and 18 finite element analysis models. The influences of flange thickness, bolt spacing, bolt diameter, and stiffener rib on initial stiffness, ultimate bearing capacity, and bolt force of T-stubs were analyzed. Furthermore, the development process and relations of the T-stub bolt force with and without stiffeners were analyzed. The results show that an effective stiffener arrangement can reduce the bending moment and prying force to a certain degree; however, offsetting the bending moment and prying force entirely is difficult. Furthermore, the influence of bending moment and prying force on the bearing capacity should be considered in the design.

28 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JHJianian He
Jianian He
LWLu Wang
Lu Wang
JHJiajun HU
Jiajun HU
ZHZhiming He
Zhiming He
SCShizhe Chen
Shizhe Chen
This study develops an enhanced coding strategy with adaptive parameter adjustment mechanisms to address the premature convergence issue inherent in conventional genetic algorithms (GAs). An improved adaptive genetic algorithm (IAGA) is proposed for optimizing the slit pattern configurations of 16 steel-frame-slotted steel plate shear wall (SSPSW) systems. The methodology incorporates a real-time probability modulation of the crossover and mutation operations based on population diversity metrics. ABAQUS finite element software and PYTHON interactive analysis were systematically used to evaluate the mechanical performance of the optimized configurations, focusing on achieving an optimal ductility–stiffness balance under cyclic loading conditions. The numerical results demonstrate that the IAGA achieves faster convergence than standard GAs. A higher aspect ratio of the inter-slot column (l/b) or a smaller aspect ratio of the slot (b/t) leads to better ductility and lower stiffness. It is recommended that the configuration with connections on two sides of an SSPSW frame be adopted.

6 April 2023 in Buildings
Verified
Journal Article
Open access
PDF file
JHJianian He
Jianian He
LFLei Fu
Lei Fu
JHJie Hu
Jie Hu
YLYanwei Lv
Yanwei Lv
YLYicheng Li
Yicheng Li
SCShizhe Chen
Shizhe Chen
A steel plate shear wall (SPSW) is a useful component for resisting lateral action. To improve the performance of frame columns, some studies focus on a two-side connected SPSW, in which the wall plate is not connected with the frame columns. However, few studies conducted on a two-side connected SPSW consider the effect of frame constraints or the connections between the infill plates and frame beams. In this study, by using finite element modeling (FEM), two unstiffened SPSW models with two-side fixed connections and six unstiffened SPSW models with two-side bolt connections were simulated. Their performance under the presence of out-of-plane frame beam flange constraints and different numbers of bolts between the infill plates and frame beams was analyzed. The mechanical performances such as hysteretic behaviors, the capacity of energy dissipation and the out-of-plane deformation of the members were investigated by applying monotonic and cyclic loading. The results revealed that non-negligible deformation would be generated at the lateral border of the bolt connections and that the out-of-plane deformation of the frame could be significantly affected by constraints. These findings can guide the engineering design of SPSWs in the future.