Shizhe Chen

Dr. Shizhe Chen

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2022 in Buildings
Verified
Journal Article
Open access
PDF file
JHJianian He
Jianian He
SLShuhong Lin
Shuhong Lin
YLYicheng Li
Yicheng Li
DXDong Xian
Dong Xian
SCShizhe Chen
Shizhe Chen
Frame structures equipped with steel plate shear walls (SPSWs) have been widely used in high-rise buildings due to their good seismic performance. In this study, the strip model and combined strip model were used to analyze the performance of SPSWs. Furthermore, an improved genetic algorithm (IGA) was established to optimize the steel frame for 5, 10, and 20 stories. For each layer, layout optimization was conducted to determine the best configurations of the SPSWs, and two cases of size optimizations of conventional SPSW configurations in the frame were conducted. Results indicate the following: (i) the total weight of the five-story steel frame of layout optimization to determine the best SPSW configuration was approximately 10% lighter than those of the size optimization of conventional SPSW configurations, and this proportion gap expanded to approximately 15–25% for the 10-story and 20-story steel frames; (ii) the steel frame weight could be significantly reduced if the average percentages of story shear resisted by web plates are increased; and (iii) in the steel frame of layout optimization, the structural elements, especially the plate elements, were better utilized than those of size optimization when their inter-story drift ratios met the specification requirements. These results highlight the prominent performances of some important indicators of the design of an SPSW system with the layout optimized using IGA.

1 November 2017 in Construction and Building Materials
Verified
Journal Article
Closed access
JPJianrong Pan
Jianrong Pan
SCShizhe Chen
Shizhe Chen
ZLZhichao Lai
Zhichao Lai
ZWZhan Wang
Zhan Wang
JWJunqi Wang
Junqi Wang
HXHuashen Xie
Huashen Xie

30 January 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YWYihuan Wang
Yihuan Wang
ZWZhan Wang
Zhan Wang
JPJianrong Pan
Jianrong Pan
PWPeng Wang
Peng Wang
JQJianGui Qin
JianGui Qin
SCShizhe Chen
Shizhe Chen
As the square steel tube in the tension zone is always the weakest part of moment-resisting joints, modified blind bolts (Hollo-Bolts) and a locally strengthened steel tube in the panel zone were adopted to enhance the joint performance. Cyclic loading tests were carried out on eight anchored blind-bolted extended end-plate joints between square concrete-filled steel tube (CFST) columns and steel beams. The test parameters included the end-plate thickness, steel tube wall thickness, beam section size, local strengthening connection method, blind bolt anchorage method, and stiffeners. The failure mode, hysteretic behavior, stiffness, strength, ductility, strength degradation, stiffness degradation, and energy dissipation capacity of the joints were studied and analyzed. The test results showed that the application of anchored blind bolts and a locally strengthened steel tube can fully utilize the bolt strength and significantly improve the joint performance, especially in terms of strength and strength degradation. The test observations revealed three typical failure modes for the joints, and the failure mode depended on the weakest component. In addition, the local reinforcement of C-channel and change in the anchorage method had a limited effect on the initial stiffness. Greater end-plate thickness and the use of stiffeners significantly increased the joint stiffness and decreased the rate of stiffness degradation. The use of stiffeners also significantly enhanced the ductility and energy dissipation by moving plastic hinge outward from the joints. Finally, finite element analysis (FEA) models were developed and validated against the experimental results, and the stress distribution and force transfer pattern were investigated.

19 August 2022 in Metals
Verified
Journal Article
Open access
PDF file
SCShizhe Chen
Shizhe Chen
MGMuying Guo
Muying Guo
YLYicheng Li
Yicheng Li
DXDong Xian
Dong Xian
JHJianian He
Jianian He
The welds of T-joints are prone to fatigue cracking owing to stress concentrations and welding residual stresses. Previous studies investigated the crack propagation rate using numerical simulations; however, most employed two-dimensional models and ignored the effect of residual stresses. In this study, reliable temperature and residual stress fields were obtained through numerical simulations and verified experimentally. The effects of residual stresses on crack propagation were then investigated under different loading conditions. The residual stress field caused the direction of crack propagation to shift towards the web and accelerated the crack propagation speed with increasing displacement loading.

22 March 2023 in Buildings
Verified
Journal Article
Open access
PDF file
JHJianian He
Jianian He
XLXuhao Li
Xuhao Li
SCShizhe Chen
Shizhe Chen
HXHuasheng Xian
Huasheng Xian
Many studies on structural topology optimization of steel plate shear walls have been conducted. However, research on topology optimization using the bidirectional evolutionary structural optimization method is limited. Accordingly, this study optimized the topology of the stiffening effect of steel plate shear walls (SPSWs) based on this method. A finite element model of the SPSW was established using Abaqus software through the “sandwich” modeling method. An optimization region was expanded into two optimization regions. As the optimization targets, SPSWs with different aspect ratios were selected. Elastoplastic optimization of a single-layer SPSW was performed through the horizontal displacement cyclic loading, and the distribution law of the stiffening effect was obtained. The stiffeners on the SPSW were arranged according to the SPSW-A075 scheme. Monotonic and reciprocating loading simulation tests were performed on the unstiffened SPSW and common transverse and longitudinal stiffeners to analyze their mechanical properties. The results show that the optimized layout of the stiffened SPSW demonstrated better seismic performance and energy dissipation capacity. The buckling bearing capacity increased by 2.17–2.61 times, and the stiffness and initial stiffness improved significantly.

3 January 2024 in Engineering Reports
Verified
Journal Article
Open access
JHJianian He
Jianian He
LFLei Fu
Lei Fu
JHJie Hu
Jie Hu
YLYanwei Lv
Yanwei Lv
SCShizhe Chen
Shizhe Chen
WMWeilin Miao
Weilin Miao
Carbon reduction is an important issue of global concern today, and with the construction industry accounting for a significant portion of global carbon emissions, carbon reduction research for the civil engineering industry is becoming increasingly important. The current research on carbon emission of buildings mainly focus on energy consumption, choice of building materials, and energy‐saving technologies. While different construction programs can affect the construction sequence and have a significant impact on carbon emissions, especially for ultra‐high‐rise steel structures. In this paper, carbon emission is introduced as the optimization objective, and a nodal optimization procedure based on carbon emission is given to explore the optimization scheme of ultra‐high‐rise steel structure construction based on carbon emission. Calculations using the carbon emission factor method were carried out to analyze the differences in carbon emissions between different construction schemes and to explore the impact of the method of carbon emission optimization. Results show that the combined lifting scheme can save 463.4 kg carbon emissions and reduce the number of lifts by 780 times.