Dislocation engineering has recently been recognized as an effective approach to develop high-performance thermoelectric materials. However, to date, the nature of dislocation engineering for performance enhancement has remained elusive in bulk materials, because the introduction of dislocations is normally accompanied by the change of the material's composition that leads to more variables in comparing and analyzing transport properties. Here, taking the Yb filled skutterudite CoSb3 as a typical example, we first clearly unveil the critical role of dislocation arrays, introduced by a liquid-phase compaction process, on electron and phonon transport behavior. Due to the fact that the dislocation width is comparable with the electron mean free path, dislocation arrays effectively screen the low-energy carriers and induce the carrier filtering effect, which leads to a remarkable enhancement of both the Seebeck coefficient and the power factor. More importantly, beyond the classical theory that the reduction of thermal conductivity is merely caused by the targeted phonon scattering via dislocations, we first discover that dislocation arrays result in lattice softening and strengthening bond anharmonicity simultaneously, both of which significantly impede the normal heat conduction process. Benefitting from dislocation engineering coupled with tuning the Yb filling fraction, we demonstrate a high thermoelectric figure of merit ZT of 1.54 at 873 K among the n-type single-filled skutterudite CoSb3. Our work not only highlights the promising prospect of Yb filled skutterudite CoSb3 for energy harvesting but also first clearly unveils the critical role of dislocation engineering for ZT enhancement.
Hardness and indentation fracture toughness of La 0.8 Ti 0.1 Ga 0.1 Fe 3 CoSb 12 can be improved by in situ formed Fe 3 Si, without sacrificing thermoelectric properties.
26 September 2018 in Journal of Materials Chemistry A
Filled skutterudites, possessing a high power factor and good mechanical properties, have attracted intensive attention for the intermediate-temperature power generation. Since n-type filled skutterudites can achieve a high peak ZT of over 1.5, it is imperative to develop their high-performance p-type counterparts for real applications. In this work, single phase p-type cerium (Ce)-filled skutterudites with dense dislocation arrays were first fabricated by the liquid phase compaction method. It was demonstrated that the dense dislocation arrays significantly reduced the lattice thermal conductivity via strain scattering. Simultaneously, there was almost no influence on the normal carrier transport process. As a result, a high peak ZT value of over 1.1 at 723 K has been obtained for the liquid phase compacted Ce0.8Fe3CoSb12 alloy, which is the record-high value among the single element-filled p-type skutterudites.
The microstructure and mechanical properties of pure W, sintered and swaged W-1.5ZrO2 composites after 1.5 × 1015 Au+/cm2 radiation at room temperature were characterized to investigate the impact of the ZrO2 phase on the irradiation resistance mechanism of tungsten materials. It can be concluded that the ZrO2 phase near the surface consists of two irradiation damage layers, including an amorphous layer and polycrystallization regions after radiation. With the addition of the ZrO2 phase, the total density and average size of dislocation loops, obviously, decrease, attributed to the reason that many more glissile 1/2 loops migrate to annihilate preferentially at precipitate interfaces with a higher sink strength of 7.8 × 1014 m−2. The swaged W-1.5ZrO2 alloys have a high enough density of precipitate interfaces and grain boundaries to absorb large numbers of irradiated dislocations. This leads to the smallest irradiation hardening change in hardness of 4.52 Gpa, which is far superior to pure W materials. This work has a collection of experiments and conclusions that are of crucial importance to the materials and nuclear communities.
Bismuth telluride (Bi2Te3)-based alloys have been extensively employed in energy harvesting and refrigeration applications for decades. However, commercially produced Bi2Te3-based alloys using the zone-melting (ZM) technique often encounter challenges such as insufficient mechanical properties and susceptibility to cracking, particularly in n-type Bi2Te3-based alloys, which severely limit the application scenarios for bismuth telluride devices. In this work, we seek to enhance the mechanical properties of n-type Bi2Te2.7Se0.3 alloys while preserving their thermoelectrical performance by a mixed mechanism of grain refinement and the TiN composite phase-introduced pinning effect. These nanoscale processes, coupled with the addition of TiN, result in a reduction in grain size. The pinning effects of nano-TiN contribute to increased resistance to crack propagation. Finally, the TiN-dispersed Bi2Te2.7Se0.3 samples demonstrate increased hardness, bending strength and compressive strength, reaching 0.98 GPa, 36.3 MPa and 74 MPa. When compared to the ZM ingots, those represent increments of 181%, 60% and 67%, respectively. Moreover, the thermoelectric performance of the TiN-dispersed Bi2Te2.7Se0.3 samples is identical to the ZM ingots. The samples exhibit a peak dimensionless figure of merit (ZT) value of 0.957 at 375 K, with an average ZT value of 0.89 within the 325–450 K temperature range. This work has significantly enhanced mechanical properties, increasing the adaptability and reliability of bismuth telluride devices for various applications, and the multi-effect modulation of mechanical properties demonstrated in this study can be applied to other thermoelectric material systems.
Detecting dopamine in vivo is critical for understanding many neurologic and psychiatric disorders. In this work, we developed a paramagnetic CEST-MRI method for dopamine detection using NaHoF4@DBA nanoparticles. Our results showed that the dopamine in mouse brain can be selectively enriched in the surface of the nanoparticles and detected by CEST-MRI. Moreover, we found that the magnitude of ST% map reflecting dopamine levels in the brain of SZ mice was relatively higher than that of PD mice.