Vibration based on structural damage detection (DD) is an important subject in many fields of engineering. Detection of possible damage locations before destructive stiffness losses in the engineering structures occur, is a main goal of DD. This paper describes the damage detection in structural elements by means of Particle Swarm Optimization algorithm (PSO). In this regard, the finite element model of a Timoshenko beam is considered, and damage is assumed as a stiffness loss in some elements. Damage locations and extents are identified minimizing some well-known modal parameter based objective functions. It is concluded that modal flexibility is the best among the considered damage indexes. Also, the results show that PSO is an effective optimization approach in structural damage detection.
A crack identification method for beam type structures under moving vehicle is proposed. The basic of the method is to formulate damage detection as an inverse problem, and solve for damage locations and extents. With respect to this, an objective function is defined based on the difference of damaged beam dynamic response and the response calculated by the mathematical model of the beam. The optimization problem is solved by the particle swarm optimization (PSO) with linearly increasing inertia weight to obtain crack locations and their depths. By the numerical simulations, it was observed that cracks with depth ratio of 0.1 can be identified with reasonable error by the present method in spite of noise interference of 3 %.
This study investigates the dynamic characteristics of three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) cantilever beams using Experimental Modal Analysis (EMA). The effects of Fused Deposition Modelling (FDM) process parameters—specifically infill pattern, infill density, nozzle size, and raster angle—on the natural frequency, mode shapes, and damping ratio were examined. Although numerous studies have addressed the static mechanical behaviour of FDM parts, there remains a significant gap in understanding how internal structural features and porosity influence their vibrational response. To address this, a total of seventy-two specimens were fabricated with varying parameter combinations, and their dynamic responses were evaluated through frequency response functions (FRFs) obtained via the impact hammer test. Damping characteristics were extracted using the peak-picking (half power) method. Additionally, the influence of internal porosity on damping behaviour was assessed by comparing the actual and theoretical masses of the specimens. The findings indicate that both natural frequencies and damping ratios are strongly influenced by the internal structure of the printed components. In particular, gyroid and cubic infill patterns increased structural stiffness and resulted in higher resonant frequencies, while low infill densities and triangle patterns contributed to enhanced damping capacity. Response Surface Methodology (RSM) was employed to develop mathematical models describing the parameter effects, providing predictive tools for applications sensitive to vibration. The high R2 values obtained in the RSM models based on the input variables show that these variables explain the effects of these variables on both natural frequency and damping ratio with high accuracy. The models developed (with R2 values up to 0.98) enable the prediction of modal behaviour, providing a valuable design tool for engineers optimizing vibration-sensitive components in fields such as aerospace, automotive, and electronics.