Understanding and predicting the behaviour of fatigue cracks are essential for ensuring safety, optimising maintenance strategies, and extending the lifespan of critical components in industries such as aerospace, automotive, civil engineering and energy. Traditional methods using vibration-based dynamic responses have provided effective tools for crack detection but often fail to predict crack propagation paths accurately. This study focuses on identifying crack propagation paths in an aluminium alloy 2024-T42 cantilever beam using dynamic response through numerical simulations and artificial neural networks (ANNs). A unified damping ratio of the specimens was measured using an ICP® accelerometer vibration sensor for the numerical simulation. Through systematic investigation of 46 crack paths of varying depths and orientations, it was observed that the crack propagation path significantly influenced the beam’s natural frequencies and resonance amplitudes. The results indicated a decreasing frequency trend and an increasing amplitude trend as the propagation angle changed from vertical to inclined. A similar trend was observed when the crack path changed from a predominantly vertical orientation to a more complex path with varying angles. Using ANNs, a model was developed to predict natural frequencies and amplitudes from the given crack paths, achieving a high accuracy with a mean absolute percentage error of 1.564%.
This study investigates the dynamic characteristics of three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) cantilever beams using Experimental Modal Analysis (EMA). The effects of Fused Deposition Modelling (FDM) process parameters—specifically infill pattern, infill density, nozzle size, and raster angle—on the natural frequency, mode shapes, and damping ratio were examined. Although numerous studies have addressed the static mechanical behaviour of FDM parts, there remains a significant gap in understanding how internal structural features and porosity influence their vibrational response. To address this, a total of seventy-two specimens were fabricated with varying parameter combinations, and their dynamic responses were evaluated through frequency response functions (FRFs) obtained via the impact hammer test. Damping characteristics were extracted using the peak-picking (half power) method. Additionally, the influence of internal porosity on damping behaviour was assessed by comparing the actual and theoretical masses of the specimens. The findings indicate that both natural frequencies and damping ratios are strongly influenced by the internal structure of the printed components. In particular, gyroid and cubic infill patterns increased structural stiffness and resulted in higher resonant frequencies, while low infill densities and triangle patterns contributed to enhanced damping capacity. Response Surface Methodology (RSM) was employed to develop mathematical models describing the parameter effects, providing predictive tools for applications sensitive to vibration. The high R2 values obtained in the RSM models based on the input variables show that these variables explain the effects of these variables on both natural frequency and damping ratio with high accuracy. The models developed (with R2 values up to 0.98) enable the prediction of modal behaviour, providing a valuable design tool for engineers optimizing vibration-sensitive components in fields such as aerospace, automotive, and electronics.
In this study, a response surface based approach is introduced to determine the physical parameters of the tip mass of a beam – tip mass system, such as mass, mass moment of inertia and coordinates of the centre of gravity with respect to the beam end point. To this end, first, a difference function was formulated based on the differences between the peak frequencies and peak amplitudes of the experimental and analytical frequency response functions. Later, observation points were established in the design space using orthogonal arrays, and a response surface was developed using the difference function values at these points. Next, the tip mass parameters were determined by minimizing the response surface with genetic algorithm and particle swarm optimization as well as fmincon, a gradient-based solver of the Matlab program. For comparison purposes, those parameters were obtained by also direct minimization of the difference function with the same algorithms. It was concluded that the tip mass parameters were successfully determined within reasonable error limits by the response surface method with less computational burden. Finally, the effect of design space width on the response surface quality is demonstrated numerically.
The integration of mechanics-based analysis and materials design procedures has become central to the development of multi-material structures with tailored mechanical and dynamic performance. In this study, the dynamic and flexural behaviour of multi-material FDM sandwich beams composed of PETG face sheets and an ABS core is experimentally investigated. Seven different infill patterns Grid, Line, Wavy, Honeycomb, Gyroid, Cubic, and Triangle were implemented in the core layer to assess their influence on damping and natural frequency behaviour. Experimental modal analysis was performed using impact testing to identify the first three vibration modes. Natural frequencies were extracted from Frequency Response Functions (FRFs), and modal damping ratios were determined using the half-power bandwidth method. The reliability of the damping results was evaluated through statistical analysis. Additionally, quasi-static three-point bending tests were conducted to assess flexural strength and load-carrying capacity. The results demonstrate that infill topology has a significant impact on both dynamic and mechanical responses. In particular, geometrically complex infill patterns exhibit enhanced stiffness, higher natural frequencies, and improved damping performance. Among the investigated designs, the Triangle infill exhibited the highest natural frequency values across the first three vibration modes (f1 ≈ 24.910 Hz, f2 ≈ 162.609 Hz, f ≈ 466.595 Hz), indicating its superior stiffness characteristics. In terms of damping behaviour, the Cubic infill showed the highest loss factor in the first vibration mode (0.0426), while the Line and Gyroid patterns exhibited the highest damping in the second (0.0439) and third modes (0.0354), respectively. Moreover, the force–displacement results revealed that the Triangle infill exhibited the highest load-bearing capacity, further confirming its superior structural stiffness among the investigated designs (SEA = 110.83 J/kg). These findings highlight the potential of multi-material FDM for designing polymer-based sandwich structures with tailored vibration and energy dissipation characteristics.
25 June 2019 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Kiriş-uç kütle sistemlerinin dinamik analizi robot kolları ve manipulatörler gibi mekanik sistemlerin başarılı bir şekilde tasarlanması açısından oldukça önemlidir. Literatürdeki birçok çalışmada bu sistemlerin serbest titreşimini analitik olarak çözümlemek için az sayıda değişken kesitli kiriş modeli dikkate alınmış, çoğunlukla sabit kesitli kiriş modeli kullanılmıştır. Ayrıca, uç kütlenin noktasal olduğu, kiriş ve uç kütle koordinat merkezlerinin çakışık olduğu kabul edilmiştir. Mevcut çalışmada burulmaya ve iki farklı düzlemde eğilmeye maruz, kiriş ve uç kütle merkezlerinin çakışık olmadığı bir sistem ele alınmış ve serbest titreşim analizi için yarı-nümerik yöntem olan Multi-Step Diferansiyel Transform Metodu (MDTM) uygulanmıştır. Sistemin doğal frekansları ve mod şekilleri iki farklı sınır şartı (sol ucun ankastre veya serbest olma durumu) için elde edilmiştir. Ayrıca, kiriş uzunluğu, uç kütle boyutları, kesit daralma oranı (taper ratio) gibi parametrelerin doğal frekanslar üzerindeki etkisi incelenmiştir. Elde edilen sonuçların doğruluğu yaygın bir şekilde kullanılan sonlu eleman yazılımı (ANSYS) ile karşılaştırılmış ve yeterince uyumlu olduğu gözlenmiştir.
19 May 2025 in Mechanics Based Design of Structures and Machines