Exploiting novel materials with high specific capacities is crucial for the progress of advanced energy storage devices. Intentionally constructing functional heterostructures based on a variety of two-dimensional (2D) substances proves to be an extremely efficient method for capitalizing on the shared benefits of these materials. By elaborately designing the structure, a greatly escalated steadiness can be achieved throughout electrochemical cycles, along with boosted electron transfer kinetics. In this study, chemical vapor deposition (CVD) was utilized to alter the surface composition of multilayer Ti3C2Tx MXene, contributing to contriving various layered heterostructure materials through a precise adjustment of the reaction temperature. The optimal composite materials at a reaction temperature of 500 °C (defined as MX500), incorporating MXene as the conductive substrate, exhibited outstanding stability and high coulombic efficiency during electrochemical cycling. Meanwhile, the reactive sites are increased by using TiS2 and TiO2 at the heterogeneous interfaces, which sustains a specific capacity of 449 mAh g−1 after 200 cycles at a current density of 0.1 A g−1 and further demonstrates their exceptional electrochemical characteristics. Additionally, the noted pseudocapacitive properties, like MXene materials, further highlight the diverse capabilities of intuitive material design. This study illuminates the complex details of surface modification in multilayer MXene and offers a crucial understanding of the strategic creation of heterostructures, significantly impacting sophisticated electrochemical applications.
21 December 2022 in Materials Chemistry and Physics
Despite their high specific capacity, magnetron-sputtered Si/Al thin films face rapid capacity decay due to stress-induced cracking, delamination, and detrimental electrolyte reactions. This study introduces a carbon-coated composite anode that overcomes these limitations, delivering superior reversible capacity, exceptional rate capability, and stable cycling performance. An electrochemical evaluation reveals that the CF-Si/Al@C-500-1h composite exhibits marked enhancements in capacity retention (43.5% after 100 cycles at 0.6 A·g−1) and rate capability, maintaining 579.1 mAh·g−1 at 3 A·g−1 (1 C). The carbon layer enhances electrical conductivity, buffers volume expansion during lithiation/delithiation, and suppresses silicon aggregation and electrolyte side reactions. Coupled with an aluminum framework, this architecture ensures robust structural integrity and efficient lithium-ion transport. These advancements position CF-Si/Al@C-500-1h as a promising anode material for next-generation lithium-ion batteries, while insights into scalable fabrication and carbon integration strategies pave the way for practical applications.
SiC-based components are sometimes susceptible to aqueous dissolution in LWR coolant environments. To address this issue, 10μm thick Cr coatings was deposited on reaction-bonded silicon carbide (RBSC) plates by magnetron sputtering. Corrosion behavior of Cr-coated SiC and -uncoated SiC coupons was studied by immersing in autoclave (345C and 16.5MPa). The weight loss of the Cr coated SiC coupons (3.02 after the 93-days) in the autoclave tests was effectively reduced due to their Cr-coated surfaces, in contrast to the uncoated ones (20.4 after the 78-days). Moreover, microstructural and compositional evolutions were examined by using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy. It was revealed that a continuous and dense Cr2O3 layer formed on the surface after the hydrothermal corrosion, which can suppress the in-diffusion of corrosive medium.