The ladder sleeper, which is a type of longitudinal sleeper with long beams in the longitudinal direction of the rail, was developed for the maintenance-labor saving of ballast tracks. In this study, to quantify the load distribution performance of the ladder sleepers at the structural boundary, full-scale model tests were conducted to quantify the vibration transmission reduction effect of the ladder sleepers. Following that, numerical experiments were carried out using a three-dimensional numerical analysis model and it was revealed that the ladder sleeper can reduce the pressure on the sleeper bottom plane by approximately 70% when compared to conventional prestressed concrete sleepers. Furthermore, when laying the ladder sleeper at the structural boundary, it was shown that laying across the structural boundary may be more effective in reducing the pressure on the sleeper bottom plane than laying it in front of the structural boundary. Finally, ladder sleepers were installed on the commercial line and long-term measurements of the longitudinal level irregularity verified the effect of suppressing the longitudinal level irregularity of the ballasted ladder track.
1 October 2018 in Journal of Physics: Conference Series
The purpose of this study was to clarify the influence of an impact load caused by a train passing over a rail joint on a prestressed concrete (PC) sleeper. In this study, we conducted a three-dimensional finite element (FE) model of the PC sleeper, which was able to simulate its nonlinear behaviour. Using this numerical analytical model, the influence of the impact load caused by the rail joint on the maximum bending moment and stress generated in the sleeper for various irregularities and train speeds were quantitatively evaluated. This study clarified the following items: 1) No cracks occurred in the PC sleeper under the rail surface irregularity actually measured in the field; 2) The crack generated owing to a train running at a speed of 87 km/h when the rail surface irregularity was three times the measured value (the maximum dimension of the irregularity was 7.05mm); 3) The bending moment of the PC sleeper had the characteristic of speed dependency, which was regarded as an influence of the rail surface irregularity.
In this study, we have constructed an efficient contact model to express the contact phenomenon between the vehicle and the railway structure during a huge earthquake. In this method, contact sensing points are set on a multi-body vehicle model and contact surfaces are defined on railway structures FEM models. The dynamic interaction force is calculated by the penalty method. In addition, we have incorporated the model into the numerical analytical program DIASTARS III that is able to express the railway vehicle behavior before and after derailment. Finally, to validate the proposed model, we have conducted a trial analysis that the carbody contacted with the structure after derailment during the earthquake.
1 January 2015 in The Proceedings of International Symposium on Seed-up and Service Technology for Railway and Maglev Systems : STECH
In this study, we have constructed a detailed contact model between a wheel and track structure to express the post-derailment railway vehicle behavior more accurately, and then we have incorporated the model into the numerical program DIASTARS III which is able to analyze dynamic interaction between the vehicles and structures, and post-derailment railway vehicle behavior. Firstly, we have proposed a method by which the running track is divided into several strips along the rail direction, and the geometric track irregularity and the contact spring between the wheel and the track structure for the each track strip are discretely defined as a function of the position in the rail direction. Secondly, we have proposed a method which can express the phenomenon that the derailed wheel collides with or jumps over the rail. Finally, to verify the proposed methods, we have carried out derailment analyses by using DIASTARS III. We have confirmed the post-derailment vehicle behavior responding to the variation of the geometric irregularities of the running track and the contact springs between the wheel and the track structure. In addition, we have confirmed that the proposed methods can express the phenomenon that the derailed wheel collides with or jumps over the rail.
In this study, field measurements of the bending moments of prestressed concrete (PC) sleepers installed on commercial lines were obtained, and numerical analyses to identify the effects of different parameters on their bending moments were conducted. The bending load capacities of aged PC sleepers collected from commercial lines via bending tests were also determined. According to the field measurement results of the wheel loads and bending moments of the PC sleepers, the measured values were smaller than the design values. In addition, neither the wheel load nor the bending moment depended on train speed. The numerical analysis results indicate that the positive bending moment at the rail seat section is unlikely to exceed the design decompression moment (DDM). However, the negative bending moment at the center section may exceed the DDM if center support is provided with a reduced spring constant under the rail (the “hanging” rail seat section). In addition, the bending moment increased with the rail surface roughness, so the rail should be kept smooth. Moreover, the results of the JIS E 1201 bending tests on the aged PC sleepers showed that the crack generation load and ultimate load decreased gradually with increases in age and passing tonnage. However, all samples satisfied the JIS standard values. Furthermore, the bending moments generated in the PC sleepers during train passage were considerably smaller than the crack generation load and ultimate load during the bending test. Thus, Japanese PC sleepers aged more than 50 years currently satisfy the standard flexural fracture values specified by the JIS, and safety is not immediately compromised.