Simple bridge displacement measurement using a video camera is effective in realizing the efficient management of numerous railway structures via condition-based maintenance. Although non-marker image measurement is significantly influenced by the measuring environment, its practical applicability considering the displacement measurement accuracy of non-marker images and the influence of various environments is not completely understood. In this study, the accuracy of non-marker image displacement measurement and the influence of illuminance are confirmed using a model bridge, and the accuracy and applicable range are discussed. Moreover, field tests on two bridges—a steel and a concrete bridge—on low-speed and high-speed railways confirm the accuracy and practical application of non-marker image measurement in a real environment. The displacement was observed to be measured with an accuracy of ~1/30 pixel (error of ~0.4 mm at 20 m position) in the daytime with sufficient brightness. Moreover, the settings for subset positions and post-processing methods to ensure accuracy in non-marker image measurement on concrete bridges with low surface contrast are discussed.
Vertical bending vibration modes and rail wave propagation, including the damping characteristics, are the factors that cause rail corrugation. However, the ability to identify actual railways has been limited because of the huge number of sensors required for field tests. In this study, a novel and field-applicable method for identifying rail vibration modes and wave propagation characteristics is developed by multipoint hammering and the reciprocity theorem instead of multipoint measuring. Additionally, the proposed method is applied to an actual rail with a direct fastening track system on a bridge that has corrugation with a wavelength of approximately 0.04 m. As a result, the wavelength (wavenumber)-, group velocity-, and distance damping (attenuation) frequency relationship of the wave propagation is clarified in addition to the rail frequencies and mode shapes up to approximately 1500 Hz, including the pinned-pinned mode. Finally, the identified wavelength-frequency relationships and the measured rail irregularity can empirically demonstrate that the generated corrugation on the rail is produced by wave interference on the two axles in the bogie.
1 January 2021 in Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE))
Frequency-based damage detection (FDD) has been studied for a long time. Generally, it is pointed out that FDD is less sensitive to detect the damage in civil structures, which are composed of many members precisely. However, for the structural members on the premise of replacement like concrete sleepers, the FDD approach that has been accumulated so far may be effective. In addition, its ease and simplicity of the system are an advantage of realizing regularly and inexpensive inspection on the sites. Here we introduce the damage influence on the concrete sleepers based on the laboratory tests and demonstration of the practical use of FDD through some filed tests.
The ladder sleeper, which is a type of longitudinal sleeper with long beams in the longitudinal direction of the rail, was developed for the maintenance-labor saving of ballast tracks. In this study, to quantify the load distribution performance of the ladder sleepers at the structural boundary, full-scale model tests were conducted to quantify the vibration transmission reduction effect of the ladder sleepers. Following that, numerical experiments were carried out using a three-dimensional numerical analysis model and it was revealed that the ladder sleeper can reduce the pressure on the sleeper bottom plane by approximately 70% when compared to conventional prestressed concrete sleepers. Furthermore, when laying the ladder sleeper at the structural boundary, it was shown that laying across the structural boundary may be more effective in reducing the pressure on the sleeper bottom plane than laying it in front of the structural boundary. Finally, ladder sleepers were installed on the commercial line and long-term measurements of the longitudinal level irregularity verified the effect of suppressing the longitudinal level irregularity of the ballasted ladder track.