A barrier wall is a vertical engineered layer designed to block contaminated soil, thereby controlling pollution sources, preventing pollutant migration to groundwater, and limiting pollution spread. Cement–bentonite barrier walls, widely adopted for their seepage control capability, structural strength, and cost-effectiveness, face sustainability challenges due to high cement consumption. This study systematically investigates the coupled effects of steel slag substitution rate and bentonite dosage on the mechanical–permeability of barrier materials for the first time and proposes steel slag (containing dicalcium silicate (C2S) and tricalcium silicate (C3S) phases similar to cement clinker) as a partial cement substitute in steel slag–cement–bentonite barrier materials, aiming to reduce cement usage and utilize industrial waste. Through unconfined compressive strength tests, direct shear tests, and variable head permeability tests, the effects of steel slag substitution rates (0~50%) and bentonite dosages (46~54%) on material performance were systematically investigated. Key findings include (1) unconfined compressive strength decreases linearly with increasing steel slag substitution but grows exponentially with bentonite dosage; (2) cohesion exhibits a negative exponential relationship with steel slag substitution and a linear positive correlation with bentonite content—the unconfined compressive strength of the materials with bentonite dosage of 50% and 54% were 1.51 and 2.84 times higher than those with bentonite dosage of 46%, respectively; (3) cohesion and unconfined compressive strength conform to c = (0.23~0.39)qu; (4) permeability decreases with higher steel slag substitution and bentonite dosage, achieving controlled low permeability (<1 × 10−7 cm/s). This research provides a sustainable solution for barrier wall construction by integrating waste recycling and performance optimization.
Magnesium phosphate cement (MPC) has gained attention in specialized construction applications due to its rapid setting and high early strength, though its inherent brittleness limits structural performance. This study developed an innovative toughening strategy through synergistic reinforcement using hybrid fibers and carbon fiber-reinforced polymer (CFRP) fabric capable of multi-scale crack control. The experimental program systematically evaluated the hybrid fiber system, dosage, and CFRP positioning effects through mechanical testing of 7-day cured specimens. The results indicated that 3.5% fiber dosage optimized flexural–compressive balance (45% flexural gain with 0.38). The developed composite system reduced brittleness through effective crack suppression across scales, confirming its capability to transform fracture behavior from brittle to quasi-ductile. This work advances MPC’s engineering applicability by resolving its mechanical limitations through rationally designed composite systems, with particular relevance to rapid repair scenarios requiring both early strength and damage tolerance, expanding its potential in specialized construction where conventional cement proves inadequate.
Traditional landfill cover materials have low strength and poor dry–wet durability. Municipal solid waste incineration fly ash (MSWI FA) can be used to partially replace cement solidification dredging sediment (DS). This article investigates the possibility of using MSWI FA and ordinary Portland cement (OPC) composite cured DS as a covering material. The mechanical properties, permeability, and wet–dry durability of the cured system were investigated under the conditions of MSWI FA content ranging from 0% to 60% and OPC content ranging from 10% to 15%. The microscopic mechanism was analyzed by scanning electron microscopy and X-ray diffraction. The results showed that when the OPC and MSWI FA contents were 15% and 20%, respectively, the comprehensive performance of the cured specimens was best after 28 days of natural curing. The unconfined compressive strength reached 1993.9 kPa, and the permeability coefficient decreased to below 1 × 10−7 cm/s, fully meeting the requirements for landfill coverage. C-S-H gel is the main strength source of the solidified body, while Friedel salt and ettringite enhance the compactness of the matrix. An excessive moisture environment promotes the water absorption of soluble salts produced by MSWI FA hydration, leading to sample expansion and reduced strength. MSWI FA and OPC cured DS exhibit good compression performance in the intermediate cover system of landfills, and can maintain good engineering performance under periodic dry–wet cycles. This dual strategic synergy solves the hazardous disposal problem of MSWI FA and the resource utilization demand of DS, demonstrating enormous application potential.