The present work aimed at the preparation and investigation of different epoxy-polyurethane (EP-PU) co-networks. The EP-PU co-networks were obtained by applying two different synthetic strategies, in which the coupling element, the Diels–Alder (DA) adduct, was prepared previously or formed “in situ” in the reaction between furan functionalized polyurethane and furfuryl amine-diglycidyl ether bisphenol-A oligomers (FA_DGEBA). For the synthesis of these EP-PU networks, poly(ε-caprolactone)-diol (PCD, M_n = 2 kg/mol) and poly(ε-caprolactone) (PCL) with different molecular weights (M_n = 10, 25 and 50 kg/mol) and 1,6-hexamethylenediisocyanate (HDI) were used. The EP-PU co-networks were characterized by Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (AT-FT-IR), differential scanning calorimetry (DSC) and dynamical mechanical analysis (DMA). Scanning electron microscopy (SEM) was applied to assess the morphology of the EP-PU samples. It was demonstrated that the stress–strain curves for the EP-PUs could be interpreted based on the Standard Linear Solid (SLS) model. The DMA traces of some EP-PUs (depending on the composition and the synthetic method) revealed a plateau-like region above the melting temperature (T_m) of PCL confirming the presence of cross-linked structure. This feature predicted shape memory (SM) behavior for these EP-PU samples. Indeed, very good shape fixity and moderate shape recovery were obtained. The shape recovery processes of these EP-PU samples were described using double exponential decay functions.

Structural changes (martensitic transformation, rearrangements of martensitic variants) in shape memory alloys have an intermittent character that is accompanied by the emission of different (thermal, acoustic, and magnetic) noises, which are fingerprints of the driven criticality, resulting in a damped power-law behaviour. We will illustrate what kinds of important information can be obtained on the structural changes in shape memory alloys. It was established that the power exponents of distributions of acoustic emission (AE) parameters (energy, amplitude, etc.), belonging to martensitic transformations, show quite a universal character and depend only on the symmetry of the martensite. However, we have shown that the asymmetry of the transformation (the exponents are different for the forward and reverse transformations) results in as large differences as those due to the martensite symmetry. We will also demonstrate how the recently introduced AE clustering method can help to identify the different contributions responsible for the asymmetry. The usefulness of the investigations of time correlations between the subsequent events and correlations between acoustic and magnetic noise events in ferromagnetic shape memory alloys will be demonstrated too. Finally, examples of acoustic and magnetic emissions during variant rearrangements (superplastic or superelastic behaviour) in the martensitic state will be described.

Electrospinning has recently been recognized as a potential method for use in biomedical applications such as nanofiber-based drug delivery or tissue engineering scaffolds. The present study aimed to demonstrate the electrospinning preparation and suitability of β-tricalcium phosphate-modified aerogel containing polyvinyl alcohol/chitosan fibrous meshes (BTCP-AE-FMs) for bone regeneration under in vitro and in vivo conditions. The mesh physicochemical properties included a 147 ± 50 nm fibrous structure, in aqueous media the contact angles were 64.1 ± 1.7°, and it released Ca, P, and Si. The viability of dental pulp stem cells on the BTCP-AE-FM was proven by an alamarBlue assay and with a scanning electron microscope. Critical-size calvarial defects in rats were performed as in vivo experiments to investigate the influence of meshes on bone regeneration. PET imaging using ¹⁸F-sodium fluoride standardized uptake values (SUVs) detected 7.40 ± 1.03 using polyvinyl alcohol/chitosan fibrous meshes (FMs) while 10.72 ± 1.11 with BTCP-AE-FMs after 6 months. New bone formations were confirmed by histological analysis. Despite a slight change in the morphology of the mesh because of cross-linking, the BTCP-AE-FM basically retained its fibrous, porous structure and hydrophilic and biocompatible character. Our experiments proved that hybrid nanospun scaffold composite mesh could be a new experimental bone substitute bioactive material in future medical practice.

Gold nanoparticles (AuNPs) display surface plasmon resonance (SPR) as a result of their irradiation at a targeted light frequency. SPR also results in heat production that increases the temperature of the surrounding environment, affecting polymerization. The aim was to investigate the SPR effect of AuNPs on a dimethacrylate-based photopolymer system. The tested composites were designed to overlap the illumination required for the polymerization and the plasmon effect. The 5 nm-sized dodecanethiol capped AuNPs were applied in different concentrations in the matrix that were irradiated with green light (λ = 532 nm), where the Irgacure 784 photoinitiator also absorbs the light. The plasmonic effect was investigated for the refractive index change by surface plasmon resonance imaging (SPRi) supplemented by ellipsometry. Moreover, optical transmission and transmission electron micrographs (TEM), diametral tensile stress (DTS), and confocal Raman spectroscopy was performed to determine the degree of conversion (DC) at 1.0, 1.4, and 2.0 mW/cm² light intensities. It was found that the optimal conditions were at 0.0208 wt% AuNPs concentration and 1.4 mW/cm² light intensity at which the refractive index change, DTS, and DC data were all maximal. The study confirmed that AuNPs are applicable to improve the polymerization efficiency of dental composite resin.

Pituitary adenylate cyclase activating polypeptide (PACAP) is a neuropeptide with diverse developmental roles, including differentiation of skeletal elements. It is a positive regulatory factor of chondrogenesis and osteogenic differentiation in vitro, but little is known about its in vivo role in bone formation. In our experiments, diaphyses of long bones from hind limbs of PACAP gene-deficient mice showed changes in thickness and increased staining intensity. Our main goal was to perform a detailed morphological and molecular biological analysis of femurs from PACAP knockout (KO) and wild type (WT) mice. Transverse diameter and anterior cortical bone thickness of KO femurs showed significant alterations with disturbed Ca²⁺ accumulation and collagen type I expression. Higher expression and activity of alkaline phosphatase were also observed, accompanied by increased fragility PACAP KO femurs. Increased expression of the elements of bone morphogenic protein (BMP) and hedgehog signalling was also observed, and are possibly responsible for the compensation mechanism accounting for the slight morphological changes. In summary, our results show that lack of PACAP influences molecular and biomechanical properties of bone matrix, activating various signalling cascade changes in a compensatory fashion. The increased fragility of PACAP KO femur further supports the role of endogenous PACAP in in vivo bone formation.